Skip to content

Latest commit

 

History

History
50 lines (43 loc) · 3.44 KB

T-Stick_2GW_Connecting_Guide(v1.3).md

File metadata and controls

50 lines (43 loc) · 3.44 KB

IDMIL logo         McGill logo

T-Stick Connecting Guide (v1.3)

Option 1: Wireless Connection

Get your network details

  1. Connect to the network you will be connecting the T-Stick to.
  2. Note the SSID (network name) and SSID Password (network password).
  3. Get your computers IP address while connected to this network. Below are linked some support articles for Windows, MacOS and Linux on how to find your computers IP address.

Connect to the T-Stick

  1. Power on your T-Stick and wait until the boot sequence is complete. If your T-Stick does not have a Power switch press the button once and wait for the T-Stick to turn on.
  2. Connect to the T-Stick_XXX wifi network where XXX is the ID of the T-Stick. ie: TStick_001. By default the password is mappings.
  3. Open your browser and go to http://TStick_XXX.local/ or http://192.168.4.1, where XXX is the ID of the T-Stick module. T-Stick setup page
  4. In the Network section write the network name and password optained in Step 2 in the SSID and SSID Password fields.
  5. In the OSC send settings put in your computer's IP address optained in Step 3 in the Primary IP field.
  6. Click the green Save button. You will be directed to a page saying that the information was saved successfully.
  7. Click Config on the top of the page to return to the orginal menu.
  8. Click the green Close and Reboot button at the bottom of the page.

Option 2: Puara Serial Manager

  1. Download or clone the Puara client repository at https://github.com/Puara/puara-client. Instructions for how to clone github repositories can be found at the link below
  2. Open config_template.json.
  3. Put in the network name you want the T-Stick to connect to in the wifiSSID field.
  4. Put the network password in the wifiPSK field.
  5. Save and close config_template.json.
  6. Run the puara_serial_manager.py script.
  7. Connect the T-Stick to your PC using a USB cable.
  8. The script should auto detect and configure the T-Stick. If the T-Stick is not being detected you may need to download the CP210x USB driver. A link can be found on Esspressif's website.

Guide info:

Version 1.3: (2022/11/19) Albert-Ngabo Niyonsenga - albert-ngabo.niyonsenga@mail.mcgill.ca
Version 1.2: (2020/03/20) Edu Meneses - eduardo.meneses@mail.mcgill.ca
Version 1.11: (2019/11/27) Edu Meneses
Version 1.1: (2019/10/27) Edu Meneses
Version 1.0: (2019/08/28) Edu Meneses

Input Devices and Music Interaction Laboratory
http://www.idmil.org
Schulich School of Music
McGill University
550 Rue Sherbrooke Ouest, Suite 500
Montreal, QC, H3A 1E
Canada