Host Application Firmware

Bootloader

MTCH2120 EVK comes with a pre-programmed application with bootloader. Bootloader facilitates updating the host firmware.

It is recommended to use mtch2120_evk_host_firmware.X project for customizing MTCH2120 EVK functionality.

How to Update the EVK Host Application

Follow Procedure to Update the On-board Host MCU in the EVK User Guide to update the host firmware

How to check the host application version?

v1.1.0 In EVK, there are 4 LEDs (D1, D3, D5, D6) which are mounted near the USB port. These LEDs will blink 2 times every time the kit powers up.