diff --git a/Lcd/src/lcd.cpp b/Lcd/src/lcd.cpp
index 1568362..f802900 100644
--- a/Lcd/src/lcd.cpp
+++ b/Lcd/src/lcd.cpp
@@ -12,12 +12,6 @@ extern "C"
 #include "spi.h"
 #include "lcd.h"
 
-struct LcdCmdData
-{
-  uint8_t _cmd ;
-  uint8_t _size ;
-  uint8_t _data[16] ; // max size
-} ;
 
 Lcd::Lcd(Spi &spi, const uint8_t *font, uint8_t fontHeight, uint8_t fontWidth)
   // LCD: B0 RS, B1 RST, B2 CS
@@ -47,33 +41,33 @@ void Lcd::setup()
   // Display Inversion On
   cmd(0x21) ;
   // Frame Rate Control (In normal mode/ Full colors)
-  cmd({0xb1,  3, { 0x05, 0x3a, 0x3a } }) ;
+  cmd(0xb1, { 0x05, 0x3a, 0x3a } ) ;
   // Frame Rate Control (In Idle mode/ 8-colors)
-  cmd({0xb2,  3, { 0x05, 0x3a, 0x3a } }) ;
+  cmd(0xb2, { 0x05, 0x3a, 0x3a } ) ;
   // Frame Rate Control (In Partial mode/ full colors)
-  cmd({0xB3,  6, { 0x05, 0x3A, 0x3A, 0x05, 0x3A, 0x3A } }) ;
+  cmd(0xB3, { 0x05, 0x3A, 0x3A, 0x05, 0x3A, 0x3A } ) ;
   // Display Inversion Control
-  cmd({0xB4,  1, { 0x03 } }) ;
+  cmd(0xB4, { 0x03 } ) ;
   // Power Control 1
-  cmd({0xC0,  3, { 0x62, 0x02, 0x04} }) ;
+  cmd(0xC0, { 0x62, 0x02, 0x04} ) ;
   // Power Control 2
-  cmd({0xC1,  1, { 0xC0 } }) ;
+  cmd(0xC1, { 0xC0 } ) ;
   // Power Control 3 (in Normal mode/ Full colors)
-  cmd({0xC2,  2, { 0x0D, 0x00 } }) ;
+  cmd(0xC2, { 0x0D, 0x00 } ) ;
   // Power Control 4 (in Idle mode/ 8-colors)
-  cmd({0xC3,  2, { 0x8D, 0x6A } }) ;
+  cmd(0xC3, { 0x8D, 0x6A } ) ;
   // Power Control 5 (in Partial mode/ full-colors)
-  cmd({0xC4,  2, { 0x8D, 0xEE } }) ;
+  cmd(0xC4, { 0x8D, 0xEE } ) ;
   // VCOM Control 1
-  cmd({0xC5,  1, { 0x0E } }) ;
+  cmd(0xC5, { 0x0E } ) ;
   // Gamma (‘+’polarity) Correction Characteristics Setting
-  cmd({0xE0, 16, { 0x10, 0x0E, 0x02, 0x03, 0x0E, 0x07, 0x02, 0x07, 0x0A, 0x12, 0x27, 0x37, 0x00, 0x0D, 0x0E, 0x10 } }) ;
+  cmd(0xE0, { 0x10, 0x0E, 0x02, 0x03, 0x0E, 0x07, 0x02, 0x07, 0x0A, 0x12, 0x27, 0x37, 0x00, 0x0D, 0x0E, 0x10 } ) ;
   // Gamma ‘-’polarity Correction Characteristics Setting
-  cmd({0xE1, 16, { 0x10, 0x0E, 0x03, 0x03, 0x0F, 0x06, 0x02, 0x08, 0x0A, 0x13, 0x26, 0x36, 0x00, 0x0D, 0x0E, 0x10 } }) ;
+  cmd(0xE1, { 0x10, 0x0E, 0x03, 0x03, 0x0F, 0x06, 0x02, 0x08, 0x0A, 0x13, 0x26, 0x36, 0x00, 0x0D, 0x0E, 0x10 } ) ;
   // Interface Pixel Format
-  cmd({0x3A,  1, { 0x06 } }) ; // 18 bit/pixel
+  cmd(0x3A, { 0x06 } ) ; // 18 bit/pixel
   // Memory Data Access Control
-  cmd({0x36,  1, { 0xa8 } }) ; // orientation 08, c8, 78, a8
+  cmd(0x36, { 0xa8 } ) ; // orientation 08, c8, 78, a8
   // Display On
   cmd(0x29) ;
 }
@@ -81,9 +75,9 @@ void Lcd::setup()
 void Lcd::fill(uint8_t x1, uint8_t x2, uint8_t y1, uint8_t y2, uint32_t rgb)
 {
   // Column Address Set
-  cmd({0x2a, 4, { 0x00,  1+x1, 0x00,  1+x2 } }) ; // x-offset  1
+  cmd(0x2a, { 0x00,  uint8_t(1+x1), 0x00,  uint8_t(1+x2) } ) ; // x-offset  1
   // Row Address Set
-  cmd({0x2b, 4, { 0x00, 26+y1, 0x00, 26+y2 } }) ; // y-offset 26
+  cmd(0x2b, { 0x00, uint8_t(26+y1), 0x00, uint8_t(26+y2) } ) ; // y-offset 26
   // Memory Write
   cmd(0x2c) ;
   
@@ -119,8 +113,8 @@ void Lcd::putChar(char ch)
     uint8_t x = (uint8_t)_txtPosX +  1 ; // x-offset  1
     uint8_t y = (uint8_t)_txtPosY + 26 ; // y-offset 26
     _txtPosX += _fontWidth ;
-    cmd({0x2a, 4, { 0x00, x+0, 0x00, x+_fontWidth -1 } }) ;
-    cmd({0x2b, 4, { 0x00, y+0, 0x00, y+_fontHeight-1 } }) ;
+    cmd(0x2a, { 0x00, uint8_t(x+0), 0x00, uint8_t(x+_fontWidth -1) } ) ;
+    cmd(0x2b, { 0x00, uint8_t(y+0), 0x00, uint8_t(y+_fontHeight-1) } ) ;
 
     // Memory Write
     cmd(0x2c) ;
@@ -225,17 +219,17 @@ void Lcd::data(uint8_t data)
   csHi() ;
 }
 
-void Lcd::cmd(const LcdCmdData &cmdData)
+void Lcd::cmd(uint8_t cmd, std::initializer_list<uint8_t> data)
 {
   csLo() ;
 
   rsLo() ;
-  _spi.putByte(cmdData._cmd) ;
+  _spi.putByte(cmd) ;
   while (_spi.isTransmit()) ;
 
   rsHi() ;
-  for (uint8_t i = 0 ; i < cmdData._size ; ++i)
-    _spi.putByte(cmdData._data[i]) ;
+  for (uint8_t x : data)
+    _spi.putByte(x) ;
   while (_spi.isTransmit()) ;
   
   csHi() ;
diff --git a/Lcd/src/lcd.h b/Lcd/src/lcd.h
index ec8bb27..c35d0bf 100644
--- a/Lcd/src/lcd.h
+++ b/Lcd/src/lcd.h
@@ -5,8 +5,7 @@
 #pragma once
 
 #include <stdint.h>
-
-class LcdCmdData ;
+#include <initializer_list>
 
 
 // LCD library for the Sitronix ST7735S controller
@@ -35,7 +34,7 @@ class Lcd
 
   void cmd(uint8_t cmd) ;
   void data(uint8_t data) ;
-  void cmd(const LcdCmdData &cmdData) ;
+  void cmd(uint8_t cmd, std::initializer_list<uint8_t> data) ;
 
   Spi     &_spi ;
   rcu_periph_enum _rcuGpio ;