WAN reconnect bug - 3.0.0.4.384.46468

[Testing7B]

Hi!
Asus 3.0.0.4.384.46468 firmware has WAN reconnection bug when using PPPoE as described here:
https://www.snbforums.com/threads/issues-with-latest-blue-cave-firmware.62959/
Any chance you could check and fix it in your upcoming release?

[paldier]

It works well. Did you perform a factory reset?

[Testing7B]

Yes, I did.
Nevermind, looking forward to your build based on 46468, bring it on!

[paldier]

This is indeed a bug. I will try to fix it. It seems to happen only once before factory reset

[Mastiff]init
start_wan: start_wan_if(0)!
[1 init:start_wan_if +37] unit=0.
update_wan_state(wan0_, 0, 0)
convert_wan_nvram(wan0_)
** wan_ifname: eth1 is NOT UP
ifconfig: name=eth1 flags=1043 IFUP addr= netmask=
update_wan_state(wan0, 1, 0)
start_wan_if(0x067e): ifup:eth1
set_hwaddr: error setting MAC address of eth1 to 68:DB:54:E4:95:D6
ifconfig: name=eth1 flags=1043 IFUP addr= netmask=
start_wan_if(0x0682): start auth:0
start_auth:: done
start_wan_if(0x068c): start udhcpc:eth1, 0
start_wan_if(): End.
udhcpc_wan:: deconfig
set_hwaddr: error setting MAC address of eth1 to 68:DB:54:E4:95:D6
ifconfig: name=eth1 flags=1043 IFUP addr=0.0.0.0 netmask=
wan_down(eth1)
wan_down(eth1): .
stop_auth:: done
route_manip: cmd=DEL name=eth1 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0
update_wan_state(wan0, 3, 0)
start_usb
[disable_ppa_wan][3928] ppacmd delwan -i eth1
update_wan_state(wan0, 4, 3)
udhcpc:: deconfig done
udhcpc_wan:: bound
set_hwaddr: error setting MAC address of eth1 to 68:DB:54:E4:95:D6
_ifconfig: name=eth1 flags=1043 IFUP addr=0.0.0.0 netmask=
set_hwaddr: error setting MAC address of eth1 to 68:DB:54:E4:95:D6
ifconfig: name=eth1 flags=1043 IFUP addr=192.168.50.156 netmask=255.255.255.0
wan_up(eth1)
update_wan_state(wan0, 2, 0)
writting prerouting eth1 192.168.50.156 eth1 0.0.0.0 br0 192.168.51.1
Couldn't get the enabled rules of Parental-control correctly!
nat_rule: skip nat_rules because of no PHY.
[1912 udhcpc:filter_setting +38] write porttrigger
NO default route!!!

[paldier]

https://bluecave.paldier.com/bluecave/BLUECAVE_R5.1.1-gc693e81.trx
a beta firmware

[chongaik3]

@paldier is this Beta version BLUECAVE_R5.1.1-gc693e81.trx include the fixes for Issue #11? Beta firmware BLUECAVE_R5.1.1-gf0c1f0a.trx does not solve the Issue #11 .If include the fixes #11 , i will upgrade my router and test it out also. Thanks for the advice

[paldier]

@chongaik3 you can try it

[paldier]

I have reported it to asus, another bug, the WAN is connected but it shows not connected,just like broadcom.

[escape75]

New firmware is out version 9.0.0.4.384_46629, website gives a different version though, hopefully it will fix this issue ...