HP Remote Console does not connect via TunnlTo

[StefanoFereri]

Hi,

TunnlTO client (running on Windows 11) is connecting without problems to a Unifi Gateway Max. But HPLOCONS app doesn't do it via TunnlTO. In the TunnlTO log, access to the destination IP address / Port looks correct, but there is no connect for HPLOCONS. A ping from the Windows client to the destination address works, and a tracert also shows no abnormalities. HPLOCONS works fine using the standard Wireguard client.

The program path is: “C:\Program Files (x86)\Hewlett Packard Enterprise\HPE iLO Integrated Remote Console\HPLOCONS.exe”, I tried also to add this program to allowed applications, without success.

Any ideas where else I could look or what I could test?

Kind regards,
Stefano

[brendanosborne]

Hello,

Could you post your config with keys and endpoint's removed. Do you know if HPLOCONS is launched as by a service or is running in administrator mode?

[StefanoFereri]

Hi,

this is my conf file:

[Interface]
PrivateKey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Address = 192.168.2.2/32
DNS = 192.168.0.1

[Peer]
PublicKey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Endpoint = mail.xxx.de:51820
AllowedIPs = 192.168.2.1/32,192.168.2.2/32,192.168.1.0/24,192.168.10.0/24

Programm is launched manually (i.e. not running as service); tried also to run it with administrative rights, no change. Remote HPLOCONS IP address is 192.168.10.6.

After uninstalling and reinstalling TunnlTO, there is now a slight difference in behavior: It now connects to the ILO interface, but instead of displaying the Windows welcome screen, it tells me after a few seconds that the connection has been disconnected by ILO. The cross-check with the official Wireguard still shows no problem.

Thanks
Stefano