Skip to content

Latest commit

 

History

History
108 lines (64 loc) · 3.27 KB

CHANGELOG.md

File metadata and controls

108 lines (64 loc) · 3.27 KB

ems-esp-domoticz-plugin Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog

[1.4] 2021-03-16

Fixed

Some solar parameters had the wrong ID.

[1.3] 2020-11-25

Firmware of the Gateway needs to be at least 2.1
This release is based on dev V1.3b6.

Added

  • Shower duration.
  • New MQTT topic names for boiler_ww etc are added.
  • Additional Solar parameters.
  • Lots of other fixes and additions.

Changed

  • Thermostat devices are only created if they are actually in the payload.
  • Thermostat modes were not updated because of the names with a capital letter.

[1.2] 2020-10-12

Firmware of the Gateway needs to be at least 2.1
This release is based on dev-2 V1.2b8.

Added

  • Added compatibility for firmware V2.1
  • Lots of other fixes and additions.

[1.0] 2020-02-12

Firmware of the Gateway needs to be at least 1.9.4. (1.9.5 is even better)

Changed

  • Sensors are now only updated when the value has changed.

[0.9] 2020-02-06

Firmware of the Gateway needs to be at least 1.9.4. (1.9.5 is even better)

Fixed

  • The thermostat command topics were changed in EMS-ESP 1.9.4, this has now been fixed here as well.

[0.8] 2020-01-27

Firmware of the Gateway needs to be at least 1.9.4.

Added

  • Added a number of boiler parameters: 31:wWComfort, 25:wWSelTemp, 26:wWDesiredTemp, 27:heating_temp, 28:wWCircPump, 29:flameCurr, 38:pump_mod_max, 39:pump_mod_min, 32:wWStarts, 33:wWWorkM, 34:UBAuptime, 35:burnStarts, 36:burnWorkMin, 37:heatWorkMin.
  • tapwater_active and heating_active parameters now work.
  • Added mqtt authentication with user/pw (thanks @hlugt for pointing it out).

[0.7] 2019-12-16

Firmware of the Gateway needs to be at least 1.9.4.
Thermostat command topics have changed in EMS-ESP, the plugin is now compatible with those in 1.9.4.

Added

  • Support for all 4 heating circuits hc1 to hc4.
  • Support for mixing modules on hc1 to hc4 (topic mixing_data). Domoticz devices for the mixing module are only generated if a first message in topic mixing_data is received, this only happens if a mixing module is detected on the EMS bus by the Gateway. (This check is done for each heating circuit).
  • Support for solar modules (topic sm_data). Domoticz devices for the solar module are only generated if a first message in topic sm_data is received, this only happens if a solar module is detected on the EMS bus by the Gateway. (Only pump, modulation and temperature sensors are supported now).
  • Domoticz devices for the optional Dallas sensors (1 to 5) are now only generated if a first message in topic sensors is received, this only happens if such a sensor is detected on the EMS bus by the Gateway.

Changed

  • Boiler wwComfort device ID 17 is now a selector switch ID 30 instead of a text sensor

Deprecated

  • Thermostat settings for the 'old' non-hc thermostat with device ID 1 and 3.

[0.6.1] 2019-11-17

In EMS-ESP firmware 1.9.2 the MQTT topics have changed. This version of the plugin adds support for the new structure. Firmware of the Gateway needs to be at least 1.9.2

Added

  • Initial support for heating circuit hc1

[0.6] 2019-08-27

Initial plugin version for EMS-ESP firmware up to 1.9.1.