Example Program 5.CR1

' Example Program 5

' David Moore

' August 8th, 2022


' The Explanation

' The goal of this program is to perform simple voltage measurements with the
' datalogger. We will measure the voltage across the '5V' and 'G' ports.


' The Wiring

' Run a wire from the '5V' port to the 'DIFF 1 H' port. Run another wire from
' the 'G' port to the 'DIFF 1 L' port.


' The Public Variables

Public Port_5V_Voltage ' Units: mV


' The Data Tables

DataTable (Data_Table_5, 1, -1)
  DataInterval (0, 5, Sec, 10)
  Sample (1, Port_5V_Voltage, IEEE4)
EndTable


' The Main Program

BeginProg
  Scan (5, Sec, 0, 0)
    ' This time we'll set the scan rate to 5 s. We'll also transfer the
    ' measurements into the data table every 5 s.
    VoltDiff (Port_5V_Voltage, 1, mv5000, 1, True, 0, _60Hz, 1.0, 0)
    CallTable Data_Table_5
  NextScan
EndProg