There must be at least 1 Vif as upstream

[Troubadix]

Hi,

using UDM SE with Firmware 2.4.8

Starting the container fails with error "There must be at leat 1 Vif as upstream".

I used "custom" during installtaion and after that typed in the values from this posting: #8 (comment)

root@UDM-SE:~# udm-iptv-diag Please share the following output with the developers: === Configuration === WAN Interface: eth8 WAN VLAN: 0 (dev iptv) WAN DHCP: true (options "-O staticroutes -V IPTV_RG") WAN Ranges: 232.0.0.0/16 87.141.0.0/16 LAN Interfaces: br4 IGMP Proxy quickleave disabled: false IGMP Proxy debug: false === IP Link and Route === === Service Logs === Apr 20 20:33:14 UDM-SE systemd[1]: udm-iptv.service: Consumed 80ms CPU time. Apr 20 20:33:14 UDM-SE systemd[1]: Started IPTV support for the UniFi Dream Machine. Apr 20 20:33:14 UDM-SE udm-iptv[21385]: NATing IPTV network ranges (if necessary) Apr 20 20:33:14 UDM-SE udm-iptv[21385]: Monitoring interface eth8 for changes Apr 20 20:33:14 UDM-SE udm-iptv[21385]: Setting up igmpproxy Apr 20 20:33:14 UDM-SE udm-iptv[21385]: Starting igmpproxy Apr 20 20:33:14 UDM-SE igmpproxy[21385]: There must be at least 1 Vif as upstream. Apr 20 20:33:14 UDM-SE systemd[1]: udm-iptv.service: Main process exited, code=exited, status=255/EXCEPTION Apr 20 20:33:14 UDM-SE systemd[1]: udm-iptv.service: Failed with result 'exit-code'. Apr 20 20:33:14 UDM-SE systemd[1]: udm-iptv.service: Consumed 85ms CPU time. root@UDM-SE:~#

Any ideas whats wrong?

Thanks.

[fabianishere]

You must have an IP address on the WAN interface for igmpproxy to start.

Try to set IPTV_WAN_DHCP to false and IPTV_WAN_STATIC_IP to some IP address.

[SamazoOo]

How I can set IPTV_WAN_DHCP to false?
Thanks!

[Troubadix]

Where can I find the configuration file for this setting?
EDIT: found in /etc/udm-iptv.conf

What IP-Adresse should I use? From which of my VLANs?

[fabianishere]

Looking at the other MagentaTv configurations, you probably need to select a different WAN interface that does have an IP address. Do you by any chance have a ppp0 interface?

[Troubadix]

Yes, there is a ppp0!

I was now able to start the udm-iptv but when I try your troubleshooting-tipps I get
root@UDM-SE:~# ip -4 addr show dev iptv Device "iptv" does not exist. root@UDM-SE:~# ip route list 62.155.242.153 dev ppp0 proto kernel scope link src 46.82.255.180 192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.1 192.168.2.0/24 dev br2 proto kernel scope link src 192.168.2.1 192.168.3.0/24 dev br3 proto kernel scope link src 192.168.3.1 192.168.4.0/24 dev br4 proto kernel scope link src 192.168.4.1
But the diag works
root@UDM-SE:~# udm-iptv-diag Please share the following output with the developers: === Configuration === WAN Interface: ppp0 WAN VLAN: 0 (dev iptv) WAN DHCP: true (options "-O staticroutes -V IPTV_RG") WAN Ranges: 232.0.0.0/16 87.141.0.0/16 LAN Interfaces: br4 IGMP Proxy quickleave disabled: false IGMP Proxy debug: false === IP Link and Route === 35: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1492 qdisc pfifo_fast state UNKNOWN group default qlen 3 inet 46.82.255.180 peer 62.155.242.153/32 scope global ppp0 valid_lft forever preferred_lft forever 62.155.242.153 proto kernel scope link src 46.82.255.180 === Service Logs === Apr 21 16:49:32 UDM-SE systemd[1]: udm-iptv.service: Consumed 90ms CPU time. Apr 21 16:49:37 UDM-SE systemd[1]: udm-iptv.service: Service RestartSec=5s expired, scheduling restart. Apr 21 16:49:37 UDM-SE systemd[1]: udm-iptv.service: Scheduled restart job, restart counter is at 13997. Apr 21 16:49:37 UDM-SE systemd[1]: Stopped IPTV support for the UniFi Dream Machine. Apr 21 16:49:37 UDM-SE systemd[1]: udm-iptv.service: Consumed 90ms CPU time. Apr 21 16:49:37 UDM-SE systemd[1]: Started IPTV support for the UniFi Dream Machine. Apr 21 16:49:37 UDM-SE udm-iptv[26848]: NATing IPTV network ranges (if necessary) Apr 21 16:49:37 UDM-SE udm-iptv[26848]: Monitoring interface ppp0 for changes Apr 21 16:49:37 UDM-SE udm-iptv[26848]: Setting up igmpproxy Apr 21 16:49:37 UDM-SE udm-iptv[26848]: Starting igmpproxy root@UDM-SE:~#