int() can't convert non-string with explicit base

[vascozorrinho]

I've tried to update my coordinator firmware using the following command:

docker run --rm --device /dev/ttyUSB0:/dev/ttyUSB0 -e FIRMWARE_URL=https://github.com/Koenkk/Z-Stack-firmware/raw/master/coordinator/Z-Stack_3.x.0/bin/CC1352P2_CC2652P_launchpad_coordinator_20240710.zip ckware/ti-cc-tool -ewv -p /dev/ttyUSB0 --bootloader-sonoff-usb

and got the following output:

vasco@pop-os:~$ docker run --rm --device /dev/ttyUSB0:/dev/ttyUSB0 -e FIRMWARE_URL=https://github.com/Koenkk/Z-Stack-firmware/raw/master/coordinator/Z-Stack_3.x.0/bin/CC1352P2_CC2652P_launchpad_coordinator_20240710.zip ckware/ti-cc-tool -ewv -p /dev/ttyUSB0 --bootloader-sonoff-usb
Downloading firmware from https://github.com/Koenkk/Z-Stack-firmware/raw/master/coordinator/Z-Stack_3.x.0/bin/CC1352P2_CC2652P_launchpad_coordinator_20240710.zip
Firmware source: 'CC1352P2_CC2652P_launchpad_coordinator_20240710.zip'
Firmware file: 'CC1352P2_CC2652P_launchpad_coordinator_20240710.hex'
sonoff
Opening port /dev/ttyUSB0, baud 500000
Reading data from CC1352P2_CC2652P_launchpad_coordinator_20240710.hex
Firmware file: Intel Hex
Connecting to target...
CC1350 PG2.1 (7x7mm): 352KB Flash, 20KB SRAM, CCFG.BL_CONFIG at 0x00057FD8
Primary IEEE Address: 00:12:4B:00:2E:20:C9:74
Performing mass erase
Erasing all main bank flash sectors
Erase done
Writing 360448 bytes starting at address 0x00000000
Write 104 bytes at 0x00057F988
Write done
Verifying by comparing CRC32 calculations.
Verified (match: 0xd9dd0124)
ERROR: int() can't convert non-string with explicit base

I'm not sure if it worked or how to check my current installed version

[git-developer]

Please see #12

[vascozorrinho]

Thanks! Do I need to flash again?

[git-developer]

I don't think so, the message is printed after writing has been completed.