Skip to content

Latest commit

 

History

History
11 lines (9 loc) · 1 KB

README.md

File metadata and controls

11 lines (9 loc) · 1 KB

Glide4Baby10

Glide4Baby10 is a basic glide/portamento circuit with PCB made in DIY Layout Creator

  1. First things first : Original circuit schematic can be found in this post at electro-music.com
  2. I made a couple of modifications that worked for my Baby-10 sequencer project
  3. The modified circuit was breadboarded and worked like a charm 👍
  • I replaced the TL072 Op-Amp with an LM358 which resulted in a less noisy output signal.
  • I replaced the 1uF electrolytic capacitor C1 for a 0.1 uF K63 film capacitor for better and well defined gliding voltage-range output.
  • Check out the modified circuit
  1. The only thing I can brag for is the actual PCB that I crafted myself as a personal learning tutorial on DIY Layout Creator