This project was created as a final project of PB171 course @ FI MUNI, spring 2019.
Main aim: connect IR receiver & smart LEDs. Allow to set multiple modes of smart leds via IR remote controller.
- CPU: PIC18F46K22
- Board: YuniPIC v1.1
- IDE: MPLABX
- Compiler: XC8
- Remote controller protocol: NEC IR
- Smart LEDs: 46 pcs of WS2812B
- LEDs' data to RA0 (ADC0 on YuniPIC, disconnect ADC jumper).
- Remote control receiver to RB3 (BUTT4 on YuniPIC, unsolder BUTT4's capacitor)