Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

M.I.B Unistall and installing this toolbox #287

Open
Boso2298 opened this issue Dec 27, 2024 · 4 comments
Open

M.I.B Unistall and installing this toolbox #287

Boso2298 opened this issue Dec 27, 2024 · 4 comments

Comments

@Boso2298
Copy link

Hi!

I recently flashed my MIB2 with M.I.B ( more incredible basher) and doesn't have the coding features this toolbox has. I am wondering if I can uninstall the M.I.B and then install this. If some of you have more experience I would love to hear from you and provide me with some guidance if possible. I'm new to this and it is the first time flashing these features on my A4B9.

Can I simply uninstall the MIB files from the GEM menu or just wipe clean the SSD re format it and then flash the toolbox on top? This is the biggest issue I currently have and I don't want to mess it up and brick the unit.

Thank you in advance and all support is greatly appreciated.

@olli991
Copy link
Collaborator

olli991 commented Dec 27, 2024

You can use both. Just notice to only have the according SD card in the unit. M.i.b. Will only appear when SD is installed. Toolbox will be there permanently but most features also only work when according SD card is inserted.

@Boso2298
Copy link
Author

Thank you for your reply!

Based on what you have mentioned, since GEM is already active I can have an SD card with M.I.B on it and a separate one with Toolbox, I can swap the SD cards and If I want to use the Toolbox or M.I.B?

Or

Should I simply create a new SD card with Toolbox on it and install it using the installation steps?

Sorry if I did not understand or missing something

@olli991
Copy link
Collaborator

olli991 commented Dec 27, 2024

Have two separate SD cards equipped with the toolbox you want to use. You can install both like the readme is telling you. Just choose the according menu of the toolbox in GEM afterwards.
The m.i.b menu will only be visible in GEM when m.i.b. SD is in the unit. The menu of this toolbox here will be visible always (after installation) but most functions are restricted when the SD card of the correct toolbox is not found in the unit.

So in easy words: just install both. Keep 2 SD cards and to be safe only insert the SD card of the toolbox you want to use at that moment.

@Boso2298
Copy link
Author

Thank you!
Just followed your advice and it works like a charm!

Thank you!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants