A command line interface for SIM modems. It uses the sim-modem library to communicate with the modem through AT commands. Tested with Simcom SIM7600G-H on Raspberry PI Zero W. The commands could be different for other modems.
python3 -m pip install sim-modem-cli
sim-modem-cli <command> address [<args>...] [--options]
$ sim-modem-cli get_signal_quality_db /dev/ttyUSB3
Signal quality: -19 dB
| Option |
Description |
| --help |
Show help message |
| --version |
Show the version |
| --baudrate |
The baudrate to use. |
| --timeout |
The timeout to use. |
| --debug |
Enable debug mode. |
| Command |
Arguments |
Description |
| Hardware related commands |
|
|
| get_model_identification |
|
Get the model identification |
| get_manufacturer_identification |
|
Get the manufacturer identification |
| get_serial_number |
|
Get the serial number |
| get_firmware_version |
|
Get the firmware version |
| get_volume |
|
Get the volume. The volume range is between 0 and 5 |
| set_volume |
int volume (1-5) |
Set the volume. The volume must be between 0 and 5 |
| improve_tdd |
|
Decrease TDD Noise effect |
| enable_echo_suppression |
|
Enable echo suppression |
| disable_echo_suppression |
|
Disable echo suppression |
| Network related commands |
|
|
| get_network_registration_status |
|
Get the network registration status |
| get_network_mode |
|
Get the network mode |
| get_network_name |
|
Get the network name |
| get_network_operator |
|
Get the network operator |
| get_signal_quality |
|
Get the signal quality |
| get_signal_quality_db |
|
Get the signal quality in dB |
| get_signal_quality_range |
|
Get the signal quality as a range |
| get_phone_number |
|
Get the phone number |
| get_sim_status |
|
Get the SIM status |
| set_network_mode |
auto | gsm_only | lte_only | no_lte |
Set the network |
| Calls related commands |
|
|
| call |
Number to call (with international prefix) |
Call a number |
| answer |
|
Answer a call |
| hangup |
|
Hangup a call |
| SMS related commands |
|
|
| get_sms_list |
|
Get the list of SMS |
| empty_sms |
|
Empty the SMS storage |
| send_sms str, message: str |
Number, message |
Send an SMS |
| get_sms |
SMS index |
Get an SMS by ID |
| delete_sms |
SMS index |
Delete an SMS by ID |
| GPS related commands |
|
|
| get_gps_status |
|
Get the GPS status |
| start_gps |
|
Start the GPS |
| stop_gps |
|
Stop the GPS |
| get_gps_coordinates |
|
Get the GPS coordinates |
MIT