console_commands.txt

Console commands
================


**Managing the 3270 console**
k a,ref shows areas on operator console
k a,none – removes “out of line area” from console.  You may need to do k e,d to remove the area first
k a,14 makes the area 14 lines deep
k a,6,6 makes two areas A and B, can then use D A,L,L=B for to display the command  D A,L in window B
Some commands,  eg display commands comes up in a “out of line” frame at bottom of the screen

k d,f scroll forward, sometimes pf8 does this. Check with d pfk
k e,d remove the bottom “out of line display” area
Screen

k q clear the backlog of queues messages
k e clear the scrolling messages
k s,ref display the current settings
k s,del=rd have message scroll off the top automatically
k s,del=n stop messages scrolling off the top
k e,n  remove nth message from the top of the screen – useful of the messages do not scroll.
d pfk
k n,PFk=(001,CMD=’d a,l;d ts,l’) sets the pf key to the command strings separated by ;
PA1 retrieve previous command
If you lose the console

v 700,offline
V CN(L700),ONLINE

**Useful MVS commands**
d r,l What replies are outstanding – first point of  call when things are “hanging”
d a,l display what jobs are active
d a,l,userid=PAICE display what jobs are active for the given userid
d u,dasd,online display online disks
d u,,,a80,16 display from a80 for 16
d u,vol=a3res1 display the unit with this volume
d ts,l what TSO users are active
d omvs is OMVS active
d omvs,f display mounted file systems
d omvs,options
d xcf,str lists the structures
d xcf,strname=xxxx displays info about an individual structure
d iplinfo gives IPL time as well as parameters used during IPL
d ssi displays the configured subsystems
cancel job
cancel u=paice cancel the TSO userid
s proc  You start many “system” jobs via a proclib member
p proc Stop a  “system” job – if they are set up to listen to the stop command
p jobname.id,A=1234   for example when S CICS.CICS1, and S CICS,CICS2 was issued
d grs,res=(*) what resources you can display on
d grs,res=(SYSDSN)   for finding out enqueues etc on resources
d grs,c  to list resources with contentions
d grs,e,c  list the resource every one is waiting on
setprog apf,add,dsn=csq.scsqauth,volume=myres1  make a library APF authorised.  Used when defining subsystems.
VTAM
d net,id=
z net,quick shut down vtam
v net,act,id=…
v net,inact,id=…
Subsystem eg DB2, MQ
setssi add,s=csq9,i=csq3ini,initparm=’CSQ3EPX,%CSQ9,M’
%csq9 start qmgr %csq9 matches from previous line
setssi add,s=dbcg,i=dsn3ini,initparm=’csqnEPX,-DBCG,M’
-dbcg start db2
d ssi  look for your subsystem
d ssi,sub=csq9  display the subsystem of interest
TCP
d TCPIP what TCP stacks are available. It may give 1 TCPIP99 CS V2R3 ACTIVE,2 TCPIP CS V2R3 ACTIVE
d TCPIP,TCPIP99,NETSTAT,CONN  if more than one TCPIP, specify which one ( eg TCPIP 99)
d TCPIP,,NETSTAT,CONN if only one TCP address space
d tcpip,tcpip,netstat,HOME   display the IP addresses used by this TCP stack
JES2
The command prefix is £ or $ depending on your system and keyboard

$djes2  display the current activity in the JES2 address space,  Outstanding I/O, Active address spaces, Active networking devices
$di display initiators
$di1-5
$Pi2-3 stop initiators 2 to 3
$si2-3  start initiators 2 to 3
$add prt1,unit=000e
$dprt*
$dprt1
$sprt1  may have to issue command twice – once after it prompts about set up
$pprt1 stop the printer
$DU,STA what units (printers etc) are started
$pjes2 stop jes after every thing is quiesced
$T JOBCLASS(STC),OUTDISP=(,) where is the output of my STC going?
  
**Commands useful when the spool has filled up**

$DSPOOL how full is the spool
$D JOBDEF display the number of JOES ( Job Output elements = numbers of files) JOENUM can be increased dynamically using $T OUTDEF,JOENUM=xxxx.  Don’t forget to change it in SYS1.PARMLIB(JESPRMxx) in order to make the change permanent.
$DJQ,SPL=(%>1) which jobs are using more than 1% of the spool
$DS,SPL=(%>1) which STCs are using more than 1% of the  spool
$dt,spl=(%>1) which TSO are using more than 1% of the spool
$DJQ,DAYS>2 which jobs are more than 2 days old
$DO JQ,JM=CCP* display all output for jobs beginning with CCP also $DO S and $do S
$PO JQ,JM=CCP* Purge all output for jobs beginning with CCP also $PO S and $po S
$DO JQ,AGE>4 Which output data sets are more than 4 days old
$PO JQ,AGE>4  Purge output data sets are more than 4 days old also $PO S and $po S
$do jq,jm=cp7*,a>7 Which output data sets belong to cp7* and are a week old also $DO S and $do S
$po jq,jm=im7*,a>7 Purge output data sets belong to im7* and are a week old also $PO S and $po S
ZFS
D OMVS,PFS  display the file systems OMVS knows about.
f ZFS,QUERY,STATUS all releases – if they are not running under uss. See here.
f omvs,pfs=zfs,query,status  2.2 or later if you are running ZFS in USS.  See here.
f zfs,fsinfo,all display detailed information about zFS file systems = aggregates
f omvs,pfs=zfs,query,…    eg all,dataset,iobydasd,vm.   Displays stats about the ZFS
zfsadm configquery display the values so you can change them with…
zfsadm config…. Change the ZFS configuration
zfsadm aggrinfo ZFS.USERS Display the size etc of the ZFS 
zfsadm grow -aggregate ZFS.USERS -size kbytes. Make the ZFS bigger
  
**TSO commands**  
ddlist or isrddn what are my TSO allocations – useful for looking for ISPPLIB concatentation etc
Line commands
B Browse the first sixteen data sets or a single data set.
E Edit the first sixteen data sets or
a single data set.
V View the first sixteen data sets or a single data set.
M Show an enhanced member list for the first sixteen data sets or a single data set.
F Free the entire DDNAME.
C Compress a PDS using the existing allocation.
I Provide additional data set information.
Q Display list of users or jobs using a data set.
Primary commands
Apf Browse Con CList COUnt CUstom
DUPlicates Enq EXclude Find Locate LOAD
LONg LPa Member MList  Only Parmlib
Reset Select SHort
Member name (ddstring) Scan allocations for a particular member.
Select modname  Search for a loaded module without searching any allocated data sets.
CUstom Show the values in ISPTCM and some ISPF configurations.
mount filesystem(‘PAICE.ABC.ZFS’) mountpoint(‘/u/paice/abc’) type(ZFS) mode(read)
unmount filesystem(‘PAICE.ABC.ZFS’) normal
  
**RACF commands**  
rlist mqcmds MQPA.* AUTHUSER
permit IRR.DIGTCERT.** class(facility) access(read) id(systask)
SETR RACLIST(facility)REFRESH   SETRacf options also SETROPTS RACLIST(STARTED) REFRESH
RDEF MQQUEUE MQ*.* OWNER(SCENU) UACC(ALTER)
PERMIT MQ*.* CLASS(MQQUEUE) ACCESS(ALTER)ID(USER1)
permit ‘paice.**’ access(read) id(colin)
ALU PAICE RESUME PASSWORD(NEW42DAY) reset the password and resume it (ALterUser)
SEARCH CLASS(USER) mask(IBM) Display all userids beginning with IBM
SEARCH CLASS(DATASET) NOMASK Display >all<  datasets.  The default is MASK(*) for your userid.
#SET TRACE(CALLABLE(ALL|TYPE()|NOCALLABLE)   Turn on RACF trace to GTF
#SET TRACE(CALLABLE(TYPE(40)),JOBNAME(CSQ9WEB)) for SAF keyring problems.
SDSF
OWNER myuserid to see jobs that I own, regardless of prefix.
“I use ST command almost exclusively in stead of DA, O etc..”
SYSNAME  allows you to see jobs on another connected system
PREFIX abc displays jobs beginning with abc
filter ? allows you to select on multiple criteria owner eq paice, jobname eq MQ*
Sort … sort on column of data sort cpu%
ARRange CPU% A REAL arranges the columns so the CPU% column is displayed after the REAL column
Prefix commands
S display the spool
SE display in edit mode
C issues JES command to cancel the job
? displays the different output files within the job
SJ allows you to edit the JCL and resubmit it
log s display the system message log for your MVS system.
log o displays the merged, sysplex-wide system message log
ulog displays the output from commands you have issued
MQ using CSQUTIL or equivilant command
alter qmgr chlauth(disabled) connauth(‘ ‘)  turn off mq chinit connection security checking
refresh security(*) type(connauth) and tell MQ to pick up the changes
  
**SMF**
SETSMF INTVAL(01) change how often SMF drives the end of interval
SETSMF MAXDORM(0010) how long SMF keeps data in its buffer before write it out
SMS – ISMF
Display all options on the ISMF panel 0 ISMF Profile.0 User Mode Selection  set to 2 For a Storage Administrator (SA)
To tailor columns displayed, used view command, specify columns and save it
Display disks and information about disks  2 Volume.1 Dasd ,
Acquire Physical Data Y,
Storage Group Name ” “
CDS Name ” “
Press enter
Display storage group name , 6 Storage Group, 1. List
and disks in the storage group 1. List,  then line operator listvol
TASID
TASID is a “monitor” tool developed internally within IBM to monitor activity on a z/OS system. It is displayed in ISPF on TSO.     It displays IPL info, storage usage, address space usage etc.   Think of unix “top” function.

Note that some options may not  operate correctly on all z/OS systems. Download it from IBM here.

  
**USS Unix services**
ls -T file display file tag, ASCII, EBCDIC etc ISO8859-1 is ASCII, code page, codepage
chtag -p display/change file tag info
chtag -t -c ISO8859-1 filename  change the filename to be oeditable
whence name like which name, tells you where a command came from eg whence oedit is /bin/oedit
tar  like zip
cp copy files
find
find . -name *.sh all files of type .sh in the current directory
find . -mtime +1 all files in the current directory modified older than one day ago
find . -mtime -1 all files in the current directory modified less than one day ago
find . -mtime 4 all files in the current directory modified exactly 4 days ago
find . -ctime 3 all files with attributes change exactly 3 day ago
find . -atime -1 all files in the current directory accessed less than one day ago. Though I do not see how this works in a R/O file system across IPLs
find . -mtime -1 -a -type f files modified less than 1 day ago, and it is a regular file. -type d for dictionary
mkdir 
mkdir -p and the intermediate directories
pax another way of packing files to make them portable. It keeps meta data.
pax -W “seqparms=’space=(cyl,(30,30))'” -wzvf “//’COLIN.PAX.CONSOLE'” -x os390 *.c *.h *.s *.py to create a dataset with the contents.
pax -vf “//’COLIN.PAX.CONSOLE'” *.s to list the dataset, matching *.s
pax -rvf “//’COLIN.PAX.CONSOLE'” *.s to read the dataset matching *.s
tar -tf myfile.pax To display contents of a pax file.  This can be used on Linux.
tar -xf myfile.pax  name.type To extract name.type from a pax file. It keeps the directory structure from the pax file.
TSO OMVS command for example the ESCape NOPFSHOW
du -ska . display summary of the size of each file below ‘.’ directory in 1KB blocks
du -ka . display the size of each file below ‘.’ directory in 1KB blocks.
du -ka /u/paice gives the space on the directory
du -ka /u/paice/* gives the space on the files within the directory
du -ka . | sort display the size of each file below ‘.’ directory in 1KB blocks sorted in ascending size.
cksum file  gives a checksum of a file, and number of bytes in the file.  There is the same command on Linux.  See here for commands on other platforms.
od -t cx1 colin.conf > ab display a file in text and hex. x1 says one byte hex number. x4 is as an int.
umask set or display the default permissions mask for when creating a unix file.
WAS, Liberty,
Angel processes
f proc,DISPLAY,SERVERS
f proc,DISPLAY,SERVERS,PID
Liberty
f proc,…
WLM
D WLM.

V WLM,POLICY=….

SLIP – to take an action when something happens
D SLIP
D SLIP=0001
SLIP SET,MSGID=BPXM023I,ACTION=SVCD,END
SLIP MOD,ENABLE ,ID=trapid
SLIP MOD,DISABLE=trapid
SLIP SET,COMP=122,ACTION=SVCD   for system abend code 122
SLIP SET,IF,RANGE=(2060825A,2060825C),JOBNAME=PYT, ACTION=SVCD take a dump when in the range. Jobname can be started task name.
OMVS
iconv -f ISO8859-1 -t IBM-037 ascii_file  > ebcdic-file convert an ASCII file to EBCDIC
iconv -f IBM-037 -t ISO8859-1 ebcdic_file  > ascii-file convert an EBCDIC file to ASCII
IPCS
LIST 20608252. ASID(X’0047′) LENGTH(X’1000′) INSTRUCTION display the data in instruction
LIST 20608252. ASID(X’0047′) LENGTH(4096) str give the value with character representation