MST2_EU_SE_ZR_P0241T

[Dj3ky]

Hello, does it support SW0241? If not how can I activate SWAP function?

[Medmimoza]

Send full firmware name

[Dj3ky]

MST2_EU_SE_ZR_P0241T

[Medmimoza]

If its navi unit ( 2sd card) so yes this toolbox will enable missing fec, but you have to replace cpu folder from root by the one on folder
toolbox / gem / cpu
Cause you probably have GEM 3.xx
Android auto will work, carplay probably not, because of usb socket

[Dj3ky]

Just question. In suported fw (https://github.com/olli991/mib-std2-pq-zr-toolbox/blob/master/cpu/onlineservices/1/default/tsd/etc/persistence/esd/scripts/patch_swap.sh) there is no 0241 firmware but it will also work?

[Dj3ky]

And also what will hapen if the unit is not suported?

[Medmimoza]

Don't worry, should work ( on navi unit) if not, just update to 254T then repeat
2 sd slot is mandatory

[Dj3ky]

OK thak you, I will try. And yes it is navi unit.

[Medmimoza]

So just install toolbox and fellow process, if any mistake just post it

[Dj3ky]

Hello,
I it is working :). Swap and also CID.
Maybe you know why android auto says that device is maybe unsuported? I cannot get to start this.

[Dj3ky]

And also voice command says that is unavaliable.

[Medmimoza]

You can tcheck usb cable, must be data cable, also tcheck if androidauto app is installed and updared in your phone, voice should work, send photo

[Dj3ky]

[Dj3ky]

I also made dump file which I will post there on dumps.

[Dj3ky]

Is there maybe something else wrong with because android auto doest work. I tried wit one usb cable on skoda and it is working and there in skoda i can select android audo but here on seat i only have full link.

[olli991]

You need to code it active in 5F via diagnostics

[Dj3ky]

Maybe you know where because i dond find it. So this is maybe also for voice commands?

[olli991]

Adaptation channels Apple_DOI and Google something.

[Dj3ky]

Thank you. Maybe you know solution for my previous post about voice comands?

[Dj3ky]

I checked supported codes and installed codes on my radio. I dont have codes in "installed codes" for carplay and android auto (00060800, 00060900) but they are in "supported codes". Is that OK or is that problem that I don't have android auto and carplay because it is not listed on "installed code"?

[Medmimoza]

You have codding missing:
5F - Adaptation - Vehicle Configuration:

• Google_GAL -> ON
• Apple_DIO -> ON
• Mirror_link -> ON
• Smartphone_interface_for_rhmi -> ON
  You will need obdeleven or vcds ... To preform codding

[TomTje]

I have the same problem.
where i find the 5F Options for Settings?

[Medmimoza]

@TomTje you need diagnostic device like vcds or obdeleven