INSTALL MIB STD2 Toolbox

[10mika78]

hi I wanted to know, to install the toolbox having only one SD card slot do I have to use an eMMC card?
In this case, can I install everything in the normal way just by deleting the metainfo?

[olli991]

Please consider reading the readme and the FAQ completly and with a working brain. Everything is described in there and directly answers your questions. If you don't understand what you are reading then you should not perform any of those things because emmc and stuff requires soldering and knowledge in what you're actually doing.

To gather some knowledge read up stuff on mibwiki.one. If you then have detailed questions come back.

Your current question only shows that you have absolutely no clue.

[10mika78]

I'm not a moron. If I ALREADY have a 16gb emmc SD card (and you don't worry if I know how to solder or not this is my problem) can I put toolbox and install it having only one slot in the SD Card machine?

[olli991]

Via emmc method you can install what ever you want.

But I think you probably thinking of throwing the emmc SD card into your MIB unit, right? The emmc SD card goes Into a card reader of your PC/laptop.

[olli991]

You need to perform this
https://mibwiki.one/doc/technisatpreh-mib2-std-zrpq-emmc-readwrite-rsoJonxr5h

Or that:
https://mibwiki.one/doc/mib-std2-toolbox-installation-via-usb2hsd-cable-aka-solderless-method-0Xzt03EC4d

To patch a non navigation unit.

[10mika78]

I have this.

[10mika78]

I have this

[10mika78]

I do not understand why with two slots you can put the patch instead with one no? Can't Full-Link unlock codes already be integrated into some updates?

[iGodly]

I do not understand why with two slots you can put the patch instead with one no? Can't Full-Link unlock codes already be integrated into some updates?

Hey man, im in the same situation like you.. did you find any solution? i only found there's the soldering method / OTG method (but its hard as soldering)

[10mika78]

No unfortunately no I think you can unlock with OBD at least so I saw on a video. You need to enter unlock codes. But I don't have an OBD11

[10mika78]

If you also find something write me. mych_ele@libero.it

[olli991]

No unfortunately no I think you can unlock with OBD at least so I saw on a video. You need to enter unlock codes. But I don't have an OBD11

Correct, you can do this AFTER you patched swap on the unit. This can be done by toolbox. But you need to get the toolbox onto the unit first and that is your problem

[10mika78]

So even if I have OBD I can not cmq unlock it?

[10mika78]

Excuse me, but how do they activate it in the dealership? I don't think they solder wire into the radio.

[olli991]

Swap code and active connection to vw servers to verify those.

If there are carplay and android audio available for purchase to retrofit from your dealer, you can do it there. Most likely something around 300 €.

[10mika78]

That is precisely the point. I wanted NOT to spend 300€

[10mika78]

But if there is they do it you should do it too, you developers. A bit like jailbreaking the iphone

[stupots]

Sounds like you know your stuff! Why don’t you develop it, then come back and tell us about it?

[10mika78]

If I were quiet nice I wouldn't ask you