epicsscans.ini

#-- Epics StepScan Station Configuration
#------------------------------#
[setup]
filename = test.dat
#--------------------------#
[server]
server = postgresql
dbname = epics_scan
host   = mini.cars.aps.anl.gov
user   = epics
password = epics
port   = 5432
#------------------------------#
# [positioners]
# 1 = Fine X || 13XRM:m1.VAL || 13XRM:m1.RBV
# 2 = Fine Y || 13XRM:m2.VAL || 13XRM:m2.RBV
# 3 = Theta || 13XRM:m3.VAL || 13XRM:m3.RBV
# 4 = Coarse X || 13XRM:pm2.VAL || 13XRM:pm2.RBV
# 5 = Coarse Y || 13XRM:m6.VAL || 13XRM:m6.RBV
# 6 = Coarse Z || 13XRM:pm1.VAL || 13XRM:pm1.RBV
# #------------------------------#
# [detectors]
# # index = label || DetectorPV || options
# 1 = scaler1  || 13IDE:scaler1 || kind="scaler",  nchan=8, use=True, use_calc=True
# 2 = multimca || 13SDD1:       || kind="multimca",  nmcas=4, nrois=32, use=True, use_full=True, use_net=False
# #------------------------------#
# [counters]
# #index = label || PVname
# 1 = MotorX_Steps || 13IDE:m11.RRBV
# #------------------------------#
# [xafs]
# #index = label || PVname
# 1 = energy_read || 13IDE:En:E_RBV
# 2 = energy_drive || 13IDE:En:Energy.VAL
# #------------------------------#
# # [slewscan]
# group = FINE
# user = Administrator
# password = Administrator
# host = 164.54.160.180
# mode = PVTGroup
# controller = NewportXPS
# #------------------------------#
# [slewscan_positioners]
# #index = label || PVname
# 1 = Fine X || 13XRM:m1 || 13XRM:1.RBV
# 2 = Fine Y || 13XRM:m2 || 13XRM:m2.RBV
# 3 = Theta || 13XRM:m3.VAL || 13XRM:m3.RBV
# #------------------------------#
# [extrapvs]
# #index = label || PVname
# 1 = Ring Current || S:SRcurrentAI.VAL
# 2 = I0 Preamp Sensitivity Number || 13IDE:A1sens_num.VAL
# 3 = I0 Preamp Sensitivity Units || 13IDE:A1sens_unit.VAL
# #-----------------------#
#