Latest update to Dahua 0.9.60 removes previous sensors from HA

[hibfamtv]

I am keying off the "Call Button Pressed" and it worked fine until the upgrade last to 0.9.60. Now that binary_sensor has disappeared from the list of entities under the device (not disabled, flat out gone).

I am using a VTO2202F-P-S2 - Version 4.5111.0000. I have tried to use the BackKeyLights but the binary_sensor I created shows up as 'unknown' - I am looking into that as a workaround but concerned the call button is not available anymore.

Also, I am taking errors on the snap-shots from the door with cgi errors which did not occur before.

Also, when I go to enable motion detection in the HA GUI, (previously on by default before upgrade), I get the below error in HA.

Failed to perform the action switch/turn_on. 500, message='Internal Server Error', url='https://IPADDR/cgi-bin/configManager.cgi?action=setConfig&MotionDetect%5B0%5D.Enable=true&MotionDetect%5B0%5D.DetectVersion=V3.0'

Please let me know if you need more information. Thanks for taking a look at this.

HA Info:
Core - 2024.10.4
Supervisor - 2024.10.3
OS - 13.2
Frontend - 20241002.4

[rroller]

Here's what mine looks like... does mine have the sensor that yours is missing?

[hibfamtv]

Yes, no button pressed is showing up any more. Thanks for responding. Happy to do any troubleshooting you suggest. Also did the update that came out after I submitted this request. I am going to try and pull the PoE to the doorbell and hard reset it. Right now, the door button appears to be inactive when you press you it. I will let you know how that goes. Thanks again, Craig

…

On Sat, Nov 2, 2024 at 12:30 PM Ronnie ***@***.***> wrote: Here's what mine looks like... does mine have the sensor that yours is missing? image.png (view on web) <https://github.com/user-attachments/assets/89bcc2b5-6580-4e15-8751-9cb56f734af8> — Reply to this email directly, view it on GitHub <#409 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AQIJ54IYGWX475FNZUZUFTDZ6UD3XAVCNFSM6AAAAABQ6LCSHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGA2TMMBUHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[hibfamtv]

Not sure why that button disappeared. I will pull out the installation and try from scratch. This is a brand new install with no restores. Thx

…

On Tue, Nov 5, 2024 at 8:41 AM Hib Fam ***@***.***> wrote: Yes, no button pressed is showing up any more. Thanks for responding. Happy to do any troubleshooting you suggest. Also did the update that came out after I submitted this request. I am going to try and pull the PoE to the doorbell and hard reset it. Right now, the door button appears to be inactive when you press you it. I will let you know how that goes. Thanks again, Craig On Sat, Nov 2, 2024 at 12:30 PM Ronnie ***@***.***> wrote: > Here's what mine looks like... does mine have the sensor that yours is > missing? > image.png (view on web) > <https://github.com/user-attachments/assets/89bcc2b5-6580-4e15-8751-9cb56f734af8> > > — > Reply to this email directly, view it on GitHub > <#409 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AQIJ54IYGWX475FNZUZUFTDZ6UD3XAVCNFSM6AAAAABQ6LCSHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGA2TMMBUHE> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[hibfamtv]

Removing the Dahua Integration and reinstalling it made no difference. The old system, with this config, still sees the below items: - Core 2024.10.2 - Supervisor 2024.11.2 - Operating System 13.1 - Frontend 20241002.3 [image: image.png] The new system, with this config,shows the below: - Core - 2024.11.1 - Supervisor - 2024.11.2 - Operating System - 13.2 - Frontend - 20241106.2 [image: image.png] Not sure if that helps or not, both are different VM's running on the same hardware and same network. Thanks, Craig

…

On Fri, Nov 8, 2024 at 3:42 PM Hib Fam ***@***.***> wrote: Not sure why that button disappeared. I will pull out the installation and try from scratch. This is a brand new install with no restores. Thx On Tue, Nov 5, 2024 at 8:41 AM Hib Fam ***@***.***> wrote: > Yes, no button pressed is showing up any more. > > Thanks for responding. Happy to do any troubleshooting you suggest. Also > did the update that came out after I submitted this request. I am going to > try and pull the PoE to the doorbell and hard reset it. Right now, the door > button appears to be inactive when you press you it. I will let you know > how that goes. > > Thanks again, > > Craig > > On Sat, Nov 2, 2024 at 12:30 PM Ronnie ***@***.***> wrote: > >> Here's what mine looks like... does mine have the sensor that yours is >> missing? >> image.png (view on web) >> <https://github.com/user-attachments/assets/89bcc2b5-6580-4e15-8751-9cb56f734af8> >> >> — >> Reply to this email directly, view it on GitHub >> <#409 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/AQIJ54IYGWX475FNZUZUFTDZ6UD3XAVCNFSM6AAAAABQ6LCSHGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJTGA2TMMBUHE> >> . >> You are receiving this because you authored the thread.Message ID: >> ***@***.***> >> >

[man-jiteshm-sportsbet]

I have the same issue. The doorbell_pressed binary sensor has gone.

Also using vto2202f-p-s2

[man-jiteshm-sportsbet]

#417 (comment)