libtoolize.in

#! /bin/sh

# Prepare a package to use libtool.
# Written by Gary V. Vaughan <gary@gnu.org>, 2003

# Copyright (C) 2003-2013 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# Libtoolize is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# Libtoolize is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.


## ------ ##
## Usage. ##
## ------ ##

# Run './libtoolize --help' for help with using this script from the
# command line.


## ------------------------------- ##
## User overridable command paths. ##
## ------------------------------- ##

# After configure completes, it has a better idea of some of the
# shell tools we need than the defaults used by the functions shared
# with bootstrap, so set those here where they can still be over-
# ridden by the user, but otherwise take precedence.

: ${AUTOCONF="autoconf"}
: ${AUTOMAKE="automake"}
: ${EGREP="@EGREP@"}
: ${FGREP="@FGREP@"}
: ${GREP="@GREP@"}
: ${LN_S="@LN_S@"}
: ${SED="@SED@"}


## -------------------------- ##
## Source external libraries. ##
## -------------------------- ##

# Much of our low-level functionality needs to be sourced from external
# libraries, which are installed to $pkgauxdir under normal use, though
# we also need to be able to find them in $srcdir during testing, or if
# executed directly from the build tree.

. "@auxscriptsdir@/funclib.sh"
. "@auxscriptsdir@/options-parser"
. "@auxscriptsdir@/extract-trace"

# Set a version string.
scriptversion='(GNU @PACKAGE@) @VERSION@'


## ---------------- ##
## Options parsing. ##
## ---------------- ##

# Hook in the functions to make sure our own options are parsed during
# the option parsing loop.

usage='$progpath [OPTION]...'

# Short help message in response to '-h'.
usage_message="Options:
   -c, --copy          copy files rather than symlinking them
       --debug         enable verbose shell tracing
   -n, --dry-run       print commands rather than running them
   -f, --force         replace existing files
   -i, --install       copy missing auxiliary files
       --ltdl[=DIR]    install libltdl sources [default: libltdl]
       --no-warnings   equivalent to '-Wnone'
       --nonrecursive  prepare ltdl for non-recursive make
   -q, --quiet         work silently
       --recursive     prepare ltdl for recursive make
       --subproject    prepare ltdl to configure and build independently
   -v, --verbose       verbosely report processing
       --version       print version information and exit
   -W, --warnings=CATEGORY
                       report the warnings falling in CATEGORY [all]
   -h, --help          print short or long help message
"

# Additional text appended to 'usage_message' in response to '--help'.
long_help_message=$long_help_message"
       'environment'   show warnings about LIBTOOLIZE_OPTIONS content
       'file'          show warnings about file copying and linking

The following space or comma delimited options can be passed to $progname
via the environment variable LIBTOOLIZE_OPTIONS, unknown environment
options are ignored:

       --debug         enable verbose shell tracing
       --no-warnings   don't display warning messages
       --quiet         work silently
       --verbose       verbosely report processing

You must 'cd' to the top directory of your package before you run
'$progname'.

When reporting a bug, please describe a test case to reproduce it and
include the following information:

       host-triplet:   @host_triplet@
       version:        $progname (GNU @PACKAGE@) @VERSION@
       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`

Report bugs to <@PACKAGE_BUGREPORT@>.
GNU @PACKAGE@ home page: <@PACKAGE_URL@>.
General help using GNU software: <http://www.gnu.org/gethelp/>.
"

warning_categories='environment file'


# libtoolize_environment_options [ARG]...
# ---------------------------------------
# Parse environment options.
libtoolize_environment_options ()
{
    $debug_mode

    my_sed_env_opt='1s/^\([^,:; ]*\).*$/\1/;q'
    my_sed_env_rest='1s/^[^,:; ]*[,:; ]*\(.*\)$/\1/;q'

    while test -n "$LIBTOOLIZE_OPTIONS"; do
      opt=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_opt"`
      LIBTOOLIZE_OPTIONS=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_rest"`

      case $opt in
        --debug|--no-warn|--no-warning|--no-warnings|--quiet|--verbose)
		envopts="${envopts+$envopts }$opt"			  ;;
        --*)	env_warning="${env_warning+$env_warning
}unrecognized environment option '$opt'"				  ;;
        *)	func_fatal_help "garbled LIBTOOLIZE_OPTIONS near '$opt'"  ;;
      esac
    done

    # Pass back the updated list of options.
    if test -n "$envopts"; then
      func_quote_for_eval "$envopts" ${1+"$@"}
    else
      func_quote_for_eval ${1+"$@"}
    fi
    libtoolize_environment_options_result=$func_quote_for_eval_result
}
func_add_hook func_options_prep libtoolize_environment_options


# libtoolize_options_prep [ARG]...
# --------------------------------
# Preparation for options parsed by libtoolize.
libtoolize_options_prep ()
{
    $debug_cmd

    # Option defaults:
    opt_copy=false
    opt_dry_run=false
    opt_force=false
    opt_install=false
    opt_ltdl=false
    opt_nonrecursive=false
    opt_quiet=false
    opt_recursive=false
    opt_subproject=false

    ltdl_mode=

    # Pass back the list of options.
    func_quote_for_eval ${1+"$@"}
    libtoolize_options_prep_result=$func_quote_for_eval_result
}
func_add_hook func_options_prep libtoolize_options_prep


# libtoolize_parse_options [ARG]...
# ---------------------------------
# Provide handling for libtoolize specific options.
libtoolize_parse_options ()
{
    $debug_cmd

    # Perform our own loop to consume as many options as possible in
    # each iteration.
    while test $# -gt 0; do
      _G_opt=$1
      shift
      case $_G_opt in
        --copy|-c)	opt_copy=: ;;

        --dry-run|--dryrun|-n)
			$opt_dry_run || {
			  opt_dry_run=:
			  CP="func_echo_all $CP"
			  test -n "$LN_S" && LN_S="func_echo_all $LN_S"
			  MKDIR="func_echo_all $MKDIR"
			  RM="func_echo_all $RM"
			}
			;;

        --force|-f)	opt_force=: ;;

        --install|-i)	opt_install=: ;;

        --ltdl)		opt_ltdl=:
			if test 0 -lt $#; then
			  case $1 in
			    -*) ;;
			    *)  ltdl_dir=`$ECHO "$1" | $SED 's|/*$||'`
			        shift
			        ;;
			  esac
			fi
			;;

        --nonrecursive|--non-recursive)
			opt_nonrecursive=:
			;;

        --quiet|--automake|-q) # --automake is for 1.5 compatibility
			opt_quiet=: ;;

        --recursive)	opt_recursive=: ;;

        --subproject)	opt_subproject=: ;;

        # Separate non-argument short options:
        -c*|-f*|-i*|-n*|-q*)
			func_split_short_opt "$_G_opt"
			set dummy "$func_split_short_opt_name" \
			    "-$func_split_short_opt_arg" ${1+"$@"}
			shift
			;;

	# An option not handled by this hook function:
        *)		set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
      esac
    done

    # save modified positional parameters for caller
    func_quote_for_eval ${1+"$@"}
    libtoolize_parse_options_result=$func_quote_for_eval_result
}
func_add_hook func_parse_options libtoolize_parse_options


# libtoolize_validate_options [ARG]...
# ------------------------------------
# Perform any sanity checks on option settings and/or unconsumed
# arguments.
libtoolize_validate_options ()
{
    # show any warnings saved by LIBTOOLIZE_OPTIONS parsing
    test -n "$env_warning" && func_warning environment "$env_warning"

    # validate $opt_nonrecursive, $opt_recursive and $opt_subproject
    if $opt_nonrecursive; then
      if $opt_recursive || $opt_subproject; then
        func_error "you can have at most one of --non-recursive, --recursive and --subproject"
      fi
      ltdl_mode=nonrecursive
    elif $opt_recursive; then
      $opt_subproject &&
        func_error "you can have at most one of --non-recursive, --recursive and --subproject"
      ltdl_mode=recursive
    elif $opt_subproject; then
      ltdl_mode=subproject
    fi

    # any remaining arguments are an error
    test 0 -lt $# &&
      func_fatal_help "unknown additional arguments: '${1+$@}'"

    # Pass back the empty argument list
    func_quote_for_eval ${1+"$@"}
    libtoolize_validate_options_result=$func_quote_for_eval_result
}
func_add_hook func_validate_options libtoolize_validate_options


# Process options as early as possible so that --help and --version
# can return quickly.
func_options ${1+"$@"}
eval set dummy "$func_options_result"; shift


# func_notquiet_once MSG_VAR
# --------------------------
# Call func_notquiet with the value of MSG_VAR, and then set MSG_VAR='' so
# that subsequent calls will have no effect.
func_notquiet_once ()
{
    $debug_cmd

    if test -n "$1"; then
      eval my_msg=\$$1

      if test -n "$my_msg"; then
        func_notquiet "$my_msg"
        eval $1=
      fi
    fi
}


# func_notquiet_hdr MSG_VAR ARG...
# --------------------------------
# With at least 1 non-empty ARG, call func_notquiet_once with MSG_VAR,
# and then func_notquiet with the remaining arguments.
func_notquiet_hdr ()
{
    $debug_cmd

    my_msg_var=$1; shift
    test -n "$*" || return

    func_notquiet_once "$my_msg_var"
    func_notquiet "$*"
}


# func_notquiet_error_hdr MSG_VAR ARG...
# --------------------------------------
# Much the same as func_notquiet_header, but for (non-fatal) error
# messages.
func_notquiet_error_hdr ()
{
    $debug_cmd

    my_msg_var=$1; shift
    test -n "$*" || return

    func_notquiet_once "$my_msg_var"
    func_error "$*"

    exit_status=$EXIT_FAILURE
}


# func_copy FILENAME SRCDIR DESTDIR [MSG_VAR [FILTER]]
# ----------------------------------------------------
# If option '--copy' was specified, or soft-linking SRCFILE to DESTFILE
# fails, then try to copy SRCFILE to DESTFILE (making sure to update the
# timestamp so that a series of files with dependencies can be copied
# in the right order that their timestamps won't trigger rebuilds). If
# FILTER is non-empty, it is a sed script to apply to SRCFILE as it is
# copied.  MSG_VAR names a variable for use with func_notquiet_hdr.
func_copy ()
{
    $debug_cmd

    my_filename=$1
    my_srcdir=$2
    my_destdir=$3
    my_msg_var=$4
    my_filter=$5

    my_srcfile=$my_srcdir/$my_filename
    my_destfile=$my_destdir/$my_filename

    # Libtool is probably misinstalled if this happens:
    test -f "$my_srcfile" || {
      func_notquiet_error_hdr "$my_msg_var" "'$my_srcfile' not found"
      return 1
    }

    # Require --force to remove existing $my_destfile.
    $opt_force && $RM "$my_destfile"
    test -f "$my_destfile" && {
      func_notquiet_error_hdr "$my_msg_var" \
        "'$my_destfile' exists: use '--force' to overwrite"
      return 1
    }

    # Be careful to support 'func_copy dir/target srcbase destbase'.
    func_dirname "$my_destfile"
    func_mkdir_p "$func_dirname_result"

    # Filters always take priority.
    if test -n "$my_filter"; then
      if $opt_dry_run || {
          ( umask 0
            $SED -e "$my_filter" "$my_srcfile" > "$my_destfile"
          ) >/dev/null 2>&1
        }
      then
        func_notquiet_once "$my_msg_var"
        if $opt_verbose; then
          func_notquiet "$SED -e '$my_filter' $my_srcfile > $my_destfile"
         else
          func_notquiet "creating file '$my_destfile'"
         fi
      else
        func_notquiet_error_hdr "$my_msg_var" "creating '$my_destfile' from '$my_srcfile' failed"
        return 1
      fi
      return 0
    fi

    # Otherwise copy or link according to '--copy' option.
    if $opt_copy; then
      my_copycmd=$CP
      my_copy_type=copying
    else
      my_copycmd=$LN_S
      my_copy_type=linking
    fi
    my_copy_msg="$my_copy_type file '$my_destfile'"
    $opt_verbose && my_copy_msg="$my_copycmd $my_srcfile $my_destdir"

    if $opt_dry_run || {
        ( umask 0
          $my_copycmd "$my_srcfile" "$my_destfile"
        ) >/dev/null 2>&1
      }
    then
      func_notquiet_hdr "$my_msg_var" "$my_copy_msg"
    else
      func_notquiet_error_hdr "$my_msg_var" \
        "$my_copy_type '$my_srcdir/$my_filename' to '$my_destdir/' failed"
      return 1
    fi
}


# func_included_files SEARCHFILE
# ------------------------------
# Output INCLUDEFILE if SEARCHFILE m4_includes it, else output SEARCHFILE.
func_included_files ()
{
    $debug_cmd

    my_searchfile=$1

    my_include_regex=
    my_sed_include='
        /^m4_include(\[.*\])$/ {
	    s|^m4_include(\[\(.*\)\])$|\1|
	    p
	}
        d'

    if test -f "$my_searchfile"; then
      $ECHO "$my_searchfile"

      # Only recurse when we don't care if all the variables we use get
      # trashed, since they are in global scope.
      for my_filename in `$SED "$my_sed_include" "$my_searchfile"`; do
	func_included_files $my_filename
      done
    fi
}


# func_serial FILENAME [MACRO_REGEX]
# ----------------------------------
# Output the value of the serial number comment in FILENAME, where the
# comment line must also match MACRO_REGEX, if given.
func_serial ()
{
    $debug_cmd

    my_filename=$1
    my_macro_regex=$2
    my_sed_serial='
	/^# serial [1-9][0-9.]*[	 ]*'"$my_macro_regex"'[	 ]*$/ {
	    s|^# serial \([1-9][0-9.]*\).*$|\1|
	    q
	}
	d'

    # Search FILENAME and all the files it m4_includes for a serial number
    # in the file that AC_DEFUNs MACRO_REGEX.
    my_serial=
    func_dirname_and_basename "$my_filename"
    my_filebase=$func_basename_result
    for my_file in `func_included_files "$my_filename"`; do
      if test -z "$my_macro_regex" ||
         test aclocal.m4 = "$my_filename" ||
         test "X$my_macro_regex" = "X$my_filebase" ||
         func_grep '^AC_DEFUN(\['"$my_macro_regex" "$my_file"
      then
        my_serial=`$SED -e "$my_sed_serial" "$my_file"`
	break
      fi
    done

    # If the file has no serial number, we assume it's ancient.
    test -n "$my_serial" || my_serial=0

    $ECHO "$my_serial"
}


# func_serial_max SERIAL1 SERIAL2
# -------------------------------
# Compare (possibly multi-part, '.' delimited) serial numbers, and
# return the largest in $func_serial_max_result.  If they are the
# same, func_serial_max_result will be empty.
func_serial_max ()
{
    $debug_cmd

    my_serial1=$1
    my_serial2=$2

    my_sed_dot='s/\..*$//g'
    my_sed_rest='s/^[0-9][1-9]*\.*//'
    my_sed_digits='s/[^0-9.]//g'

    # Incase they turn out to be the same, we'll set it to empty
    func_serial_max_result=

    test "X$1$2" = X`$ECHO "$1$2" | $SED "$my_sed_digits"` || {
      func_error "serial numbers '$1' or '$2' contain non-digit chars"
      return
    }

    while test -n "$my_serial1$my_serial2"; do
      my_serial1_part=`$ECHO "$my_serial1" | $SED "$my_sed_dot"`
      my_serial2_part=`$ECHO "$my_serial2" | $SED "$my_sed_dot"`

      test -z "$my_serial1_part$my_serial2_part" \
        && break

      test -z "$my_serial1_part" \
        && { func_serial_max_result=$2; break; }

      test -z "$my_serial2_part" \
        && { func_serial_max_result=$1; break; }

      test "$my_serial1_part" -gt "$my_serial2_part" \
        && { func_serial_max_result=$1; break; }

      test "$my_serial2_part" -gt "$my_serial1_part" \
        && { func_serial_max_result=$2; break; }

      my_serial1=`$ECHO "$my_serial1" | $SED "$my_sed_rest"`
      my_serial2=`$ECHO "$my_serial2" | $SED "$my_sed_rest"`
    done
}


# func_serial_update_check SRCFILE SRC_SERIAL DESTFILE DEST_SERIAL
# ----------------------------------------------------------------
# Unless SRC_SERIAL is newer than DEST_SERIAL set $func_serial_update_check
# to 'false'.
func_serial_update_check ()
{
    $debug_cmd

    $require_ac_ltdl_dir
    $require_ac_macro_dir

    my_srcfile=$1
    my_src_serial=$2
    my_destfile=$3
    my_dest_serial=$4
    my_update_p=:

    if test -f "$my_destfile"; then
      test 0 = "$my_src_serial" && {
        func_warning file "no serial number on '$my_srcfile', not copying."
	return
      }

      # Determine whether the destination has an older serial.
      func_serial_max "$my_src_serial" "$my_dest_serial"
      test "X$my_src_serial" = "X$func_serial_max_result" || my_update_p=false

      test "X$my_src_serial" = "X$func_serial_max_result" \
        && func_verbose "'$my_srcfile' is serial $my_src_serial, greater than $my_dest_serial in '$my_destfile'"

      if test "X$my_dest_serial" = "X$func_serial_max_result"; then
        func_verbose "'$my_srcfile' is serial $my_src_serial, less than $my_dest_serial in '$my_destfile'"
	$opt_force || if test -n "$ac_macro_dir$ac_ltdl_dir"; then
           func_error "'$my_destfile' is newer: use '--force' to overwrite"
        fi
      fi
    fi

    func_serial_update_check_result=$my_update_p
}


# func_aclocal_update_check FILENAME
# ----------------------------------
# Unless serial number of FILENAME is newer than the matching serial number
# in aclocal.m4, set $func_aclocal_update_check to 'false'.
func_aclocal_update_check ()
{
    $debug_cmd

    my_filename=$1

    my_srcfile=$aclocaldir/$1
    my_destfile=aclocal.m4

    case $my_filename in
      libtool.m4)
	my_src_serial=`func_serial "$my_srcfile" LT_INIT`
	my_dest_serial=`func_serial "$my_destfile" LT_INIT`

	# Strictly, this libtoolize ought not to have to deal with ancient
	# serial formats, but we accept them here to be complete:
	test 0 = "$my_src_serial" &&
	  my_src_serial=`func_serial "$my_srcfile" 'A[CM]_PROG_LIBTOOL'`
	test 0 = "$my_dest_serial" &&
	  my_dest_serial=`func_serial "$my_destfile" 'A[CM]_PROG_LIBTOOL'`
	;;
      ltdl.m4)
	my_src_serial=`func_serial "$my_srcfile" LTDL_INIT`
	my_dest_serial=`func_serial "$my_destfile" LTDL_INIT`
	;;
      *)
	my_src_serial=`func_serial "$my_srcfile" "$my_filename"`
	my_dest_serial=`func_serial "$my_destfile" "$my_filename"`
	;;
    esac

    func_serial_update_check \
      "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"

    func_aclocal_update_check_result=$func_serial_update_check_result
}


# func_serial_update FILENAME SRCDIR DESTDIR [MSG_VAR] [MACRO_RE] [OLD_MACRO_RE]
# ------------------------------------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer serial number, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.  If given, MACRO_REGEX or
# OLD_MACRO_REGEX must match any text after "# serial N" in both files.
func_serial_update ()
{
    $debug_cmd

    my_filename=$1
    my_srcdir=$2
    my_destdir=$3
    my_msg_var=$4
    my_macro_regex=$5
    my_old_macro_regex=$6

    my_serial_update_p=:
    my_return_status=1
    my_srcfile=$my_srcdir/$my_filename
    my_destfile=$my_destdir/$my_filename

    test -f "$my_srcfile" || func_fatal_error "'$my_srcfile' does not exist."

    if test -f "$my_destfile"; then
      my_src_serial=`func_serial "$my_srcfile" "$my_macro_regex"`
      my_dest_serial=`func_serial "$my_destfile" "$my_macro_regex"`

      # Strictly, this libtoolize ought not to have to deal with ancient
      # serial formats, but we accept them here to be complete:
      test 0 = "$my_src_serial" &&
        my_src_serial=`func_serial "$my_srcfile" "$my_old_macro_regex"`

      test 0 = "$my_dest_serial" &&
        my_dest_serial=`func_serial "$my_destfile" "$my_old_macro_regex"`

      func_serial_update_check \
        "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
      my_serial_update_p=$func_serial_update_check_result
    fi

    if $my_serial_update_p || $opt_force; then
      $RM "$my_destfile"
      func_copy "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
      my_return_status=$?
    elif $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
      func_notquiet_hdr "$my_msg_var" "'$my_destfile' is already up to date."
    fi

    # Do this after the copy for hand maintained 'aclocal.m4', incase
    # it has 'm4_include([DESTFILE])', so the copy effectively already
    # updated 'aclocal.m4'.
    my_included_files=`func_included_files aclocal.m4`
    case `echo " "$my_included_files" "` in

      # Skip included files:
      *" $my_destfile "*) ;;

      # Otherwise compare to aclocal.m4 serial number (func_serial
      # returns 0 for older macro serial numbers before we provided
      # serial tags, so the update message will be correctly given
      # if aclocal.m4 contains an untagged --i.e older-- macro file):
      *)
        if test -f aclocal.m4; then
          func_serial_max \
              "$my_src_serial" `func_serial aclocal.m4 "$my_macro_regex"`
          if test "X$my_src_serial" = "X$func_serial_max_result"; then
	      func_notquiet_hdr "$my_msg_var" \
                "You should add the contents of '$my_destfile' to 'aclocal.m4'."
          fi
        fi
        ;;
    esac
    return $my_return_status
}


# func_keyword_update FILENAME SRCDIR DESTDIR SED_SCRIPT [MSG_VAR]
# ----------------------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer revision according to the serial number extracted by
# SED_SCRIPT, or DESTFILE does not yet exist, or the user specified
# '--force' at the command line.
func_keyword_update ()
{
    $debug_cmd

    my_filename=$1
    my_srcdir=$2
    my_destdir=$3
    my_sed_script=$4
    my_msg_var=$5

    my_srcfile=$my_srcdir/$my_filename
    my_destfile=$my_destdir/$my_filename

    my_keyword_update_p=:

    test -f "$my_srcfile" || func_fatal_error "'$my_srcfile' does not exist."

    if test -f "$my_destfile"; then
      my_src_serial=`$SED -e "$my_sed_script" "$my_srcfile"`
      test -z "$my_src_serial" && {
        func_warning file "no serial number in '$my_srcfile', not copying."
	return
      }

      my_dest_serial=`$SED -e "$my_sed_script" "$my_destfile"`
      test -n "$my_dest_serial" || my_dest_serial=0

      func_serial_update_check \
         "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
      my_keyword_update_p=$func_serial_update_check_result
    fi

    if $my_keyword_update_p || $opt_force; then
      $RM "$my_destfile"
      func_copy "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
    elif $opt_verbose || $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
      func_notquiet_hdr "$my_msg_var" "'$my_destfile' is already up to date."
    fi
}


# func_ltmain_update FILENAME SRCDIR DESTDIR [MSG_VAR]
# ----------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer revision, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.
func_ltmain_update ()
{
    $debug_cmd

    my_sed_ltmain='
	/^package_revision='\''*[0-9][1-9.]*'\''*/ {
	    s|^package_revision='\''*\([0-9.]*\)'\''*[	 ]*$|\1|
	    p
	}
	d'

    func_keyword_update "$1" "$2" "$3" "$my_sed_ltmain" "$4"

    return $my_return_status
}


# func_config_update FILENAME SRCDIR DESTDIR [MSG_VAR]
# ----------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer timestamp, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.
func_config_update ()
{
    $debug_cmd

    my_sed_config='
	/^timestamp='\''*[0-9][1-9-]*'\''*/ {
	    s|^timestamp='\''*\([0-9-]*\)'\''*|\1|
	    s|-|.|g
	    p
	}
	d'

    func_keyword_update "$1" "$2" "$3" "$my_sed_config" "$4"

    return $my_return_status
}


# func_install_update FILENAME SRCDIR DESTDIR [MSG_VAR]
# -----------------------------------------------------
# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
# has a newer timestamp, or DESTFILE does not yet exist, or the user
# specified '--force' at the command line.
func_install_update ()
{
    $debug_cmd

    my_sed_install='
	/^scriptversion='\''*[0-9][1-9.-]*'\''*/ {
	    s|[#;].*||
	    s|^scriptversion='\''*\([0-9.-]*\)'\''*|\1|
	    s|-|.|g
	    p
	}
	d'

    func_keyword_update "$1" "$2" "$3" "$my_sed_install" "$4"

    return $my_return_status
}


# func_install_pkgmacro_files
# ---------------------------
# Install copies of the libtool and libltdl m4 macros into this package.
func_install_pkgmacro_files ()
{
    $debug_cmd

    $require_ac_macro_dir
    $require_am_macro_dir
    $require_ltdl_mode
    $require_macro_dir

    $opt_ltdl || test -n "$ac_macro_dir$am_macro_dir" || return

    # Remove any lingering files that my have been installed by some
    # previous libtoolize release:
    $opt_force && for file in $all_pkgmacro_files; do
      test -f "$macro_dir/$file" && func_verbose "rm -f '$macro_dir/$file'"
      rm -f "$macro_dir/$file"
    done

    # Install the libltdl autoconf macros to this project's source tree.
    $opt_quiet || if test -n "$ac_macro_dir"; then
      my_pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIRS, '$ac_macro_dir'."
    else
      my_pkgmacro_header="putting macros in '$macro_dir'."
    fi

    for file in $pkgmacro_files; do
      case $file in
        libtool.m4)
          func_serial_update "$file" "$aclocaldir" "$macro_dir" \
            my_pkgmacro_header LT_INIT 'A[CM]_PROG_LIBTOOL'
          ;;
        ltdl.m4)
          if $opt_ltdl; then
            func_serial_update "$file" "$aclocaldir" "$macro_dir" \
              my_pkgmacro_header 'LTDL_INIT'
          else
            func_verbose "Not copying '$macro_dir/$file', libltdl not used."
          fi
          ;;
        ltoptions.m4|ltsugar.m4|ltversion.m4|lt~obsolete.m4)
          func_serial_update "$file" "$aclocaldir" "$macro_dir" \
            my_pkgmacro_header "$file"
          ;;
        *)
          if $opt_ltdl; then
            func_serial_update "$file" "$aclocaldir" "$macro_dir" \
              my_pkgmacro_header "$file"
          else
            func_verbose "Not copying '$macro_dir/$file', libltdl not used."
          fi
          ;;
      esac
    done
}


# func_install_pkgltdl_files
# --------------------------
# Install copies of the libltdl files into this package.  Any auxiliary
# or m4 macro files needed in the libltdl tree will also be copied by
# func_install_pkgaux_files and func_install_pkgmacro_files resp.
func_install_pkgltdl_files ()
{
    $debug_cmd

    $opt_ltdl || return

    $require_ac_ltdl_dir
    $require_ltdl_dir
    $require_ltdl_mode

    # Remove any lingering files that my have been installed by some
    # previous libtoolize release:
    $opt_force && for file in $all_pkgltdl_files; do
      test -f "$ltdl_dir/$file" && func_verbose "rm -f '$ltdl_dir/$file'"
      rm -f "$ltdl_dir/$file"
    done

    # Copy all the files from installed libltdl to this project, if the
    # user specified '--ltdl'.
    $opt_quiet || if test -n "$ac_ltdl_dir"; then
      pkgltdl_header="putting libltdl files in LT_CONFIG_LTDL_DIR, '$ac_ltdl_dir'."
    else
      pkgltdl_header="putting libltdl files in '$ltdl_dir'."
    fi

    $require_filter_Makefile_am
    $require_filter_ltdl_mk

    # Copy ltdl sources appropriate to the requested ltdl_mode.
    for file in $pkgltdl_files; do
      my_copy_filter=
      case $file in
        Makefile.am|Makefile.in)
          test nonrecursive = "$ltdl_mode" && continue
          my_copy_filter=$filter_Makefile_am
          ;;

        ltdl.mk)
          test nonrecursive = "$ltdl_mode" || continue
          my_copy_filter=$filter_ltdl_mk
          ;;

        aclocal.m4)
          test subproject = "$ltdl_mode" && {
            $require_filter_aclocal_m4

            # Always copy aclocal.m4, otherwise regenerating it can
            # overwrite the destination if it is symlinked.
            ( opt_copy=:
              func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
                pkgltdl_header "$filter_aclocal_m4"
            )
          }
          continue
	  ;;

        config-h.in)
          test subproject = "$ltdl_mode" || continue
          ;;

        configure)
          test subproject = "$ltdl_mode" && {
            $require_filter_configure_ac

            # Always copy configure, otherwise regenerating it can
            # overwrite the destination if it is symlinked.
            ( opt_copy=:
              func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
                pkgltdl_header "$filter_configure_ac"
            )
          }
          continue
	  ;;

        configure.ac)
          test subproject = "$ltdl_mode" || continue
          $require_filter_configure_ac
          my_copy_filter=$filter_configure_ac
          ;;
      esac

      # Still here?  Copy the file then, with selected filters.
      func_copy "$file" "$pkgltdldir" "$ltdl_dir" \
        pkgltdl_header "$my_copy_filter"

      # FIXME: Remove in 2013
      #        (along with deprecation warning in func_check_macros)
      test ltdl.mk = "$file" \
        && func_grep "^-\?include $ltdl_dir/Makefile.inc\$" Makefile.am \
        && mv "$ltdl_dir/$file" "$ltdl_dir/Makefile.inc" \
        && func_notquiet "renaming file '$ltdl_dir/Makefile.inc'"
    done
}


# func_install_pkgaux_files
# -------------------------
# Install copies of the auxiliary files into this package according to
# the whether libltdl is included as a subproject, and whether the parent
# shares the AC_CONFIG_AUX_DIR setting.
func_install_pkgaux_files ()
{
    $debug_cmd

    $require_ac_aux_dir
    $require_aux_dir
    $require_configure_ac
    $require_ltdl_mode

    # Remove any lingering files that my have been installed by some
    # previous libtoolize release:
    $opt_force && for file in $all_pkgaux_files; do
      test -f "$aux_dir/$file" && func_verbose "rm -f '$aux_dir/$file'"
      rm -f "$aux_dir/$file"
    done

    if test -n "$ac_aux_dir"; then
      pkgaux_header="putting auxiliary files in AC_CONFIG_AUX_DIR, '$ac_aux_dir'."
    else
      pkgaux_header="putting auxiliary files in '$aux_dir'."
    fi

    for file in $pkgaux_files; do
      case $file in
        config.guess|config.sub)
          $opt_install || test subproject = "$ltdl_mode" || continue
          func_config_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
        install-sh)
          $opt_install || test subproject = "$ltdl_mode" || continue
          func_install_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
        ltmain.sh)
          func_ltmain_update "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
        *)
          test subproject = "$ltdl_mode" || continue
          func_copy "$file" "$pkgauxdir" "$aux_dir" pkgaux_header
          ;;
      esac
    done

    # If the parent project is using Autoconf and linking with Libtool,
    # even if subproject libltdl already has a copy, the parent project
    # will still need to build libtool for its own purposes, and might
    # need another copy of ltmain.sh if the parent didn't declare an
    # AC_CONFIG_AUX_DIR.
    pkgaux_hdr="putting another copy of auxiliary files in '.'"
    test -f "$configure_ac" \
      && test -z "$ac_aux_dir" \
      && test subproject = "$ltdl_mode" \
      && test "$aux_dir" = "$ltdl_dir" \
      && func_ltmain_update "$file" "$pkgauxdir" . pkgaux_hdr

    # FIXME: Remove in 2013.
    # Very old parent projects using 'libtoolize --install --ltdl', and
    # a top-level $configure_ac to build the ltdl subproject, but not
    # using Automake themselves, might still be relying on the old
    # behaviour of libtoolize to put a second copy of some 'Auxiliary
    # Programs' needed by the top-level configure (instead of using
    # the recommended method: 'automake --add-missing').
    test -f "$configure_ac" \
      && test subproject = "$ltdl_mode" \
      && test "$aux_dir" = "$ltdl_dir" \
      && func_config_update config.guess "$pkgauxdir" . pkgaux_hdr \
      && func_config_update config.sub "$pkgauxdir" . pkgaux_hdr \
      && func_install_update install-sh "$pkgauxdir" . pkgaux_hdr
}


# func_nonemptydir_p DIRVAR
# -------------------------
# DIRVAR is the name of a variable to evaluate.  Unless DIRVAR names
# a directory that exists and is non-empty abort with a diagnostic.
func_nonemptydir_p ()
{
    $debug_cmd

    my_dirvar=$1
    my_dir=`eval echo "\\\$$my_dirvar"`

    # Is it a directory at all?
    test -d "$my_dir" \
      || func_fatal_error "\$$my_dirvar is not a directory: '$my_dir'"

    # check that the directories contents can be ls'ed
    test -n "`{ cd $my_dir && ls; } 2>/dev/null`" \
        || func_fatal_error "cannot list files: '$my_dir'"
}


# func_check_macros
# -----------------
# Sanity check macros from aclocal.m4 against installed versions.
func_check_macros ()
{
    $debug_cmd

    $require_ac_ltdl_dir
    $require_ac_macro_dir
    $require_am_macro_dir
    $require_aux_dir
    $require_configure_ac
    $require_ltdl_dir
    $require_ltdl_mode
    $require_macro_dir
    $require_seen_ltdl
    $require_seen_libtool

    $opt_quiet && return
    test -n "$configure_ac" || return

    ac_config_macro_dir_advised=false

    if test -z "$ac_macro_dir$am_macro_dir"; then
      my_missing=
      for file in $pkgmacro_files; do
        case $file in
          argz.m4|ltdl.m4) $opt_ltdl || continue ;;
        esac
        if test -f "aclocal.m4"; then
          func_aclocal_update_check $file
          $func_aclocal_update_check_result || continue
        fi
        my_missing="$my_missing $file"
      done

      if test -n "$my_missing"; then
        func_echo "You should add the contents of the following files to 'aclocal.m4':"
        for need in $my_missing; do
	  func_echo "  '$aclocaldir/$need'"
        done
      fi
    fi

    ## ---------------------------------------------------------- ##
    ## Since we return early here when --no-warn was given:       ##
    ## DO NOT PUT ANYTHING BUT UPGRADE ADVICE MESSAGES BELOW HERE ##
    ## ---------------------------------------------------------- ##

    test " none" = "$opt_warning_types" && return

    $seen_libtool ||
      func_echo "Remember to add 'LT_INIT' to $configure_ac."

    # Suggest using LTDL_INIT if appropriate:
    $opt_ltdl && if test : != "$seen_ltdl"; then
      case $ltdl_mode in
	subproject) ltdl_init_args=                 ;;
	*)          ltdl_init_args="([$ltdl_mode])" ;;
      esac
      func_echo "Remember to add 'LTDL_INIT$ltdl_init_args' to $configure_ac."
    fi

    if $opt_ltdl; then
      # Remind the user to call LT_CONFIG_LTDL_DIR:
      test -n "$ac_ltdl_dir" ||
        func_echo "Remember to add 'LT_CONFIG_LTDL_DIR([$ltdl_dir])' to '$configure_ac'."

      # For nonrecursive mode, warn about continued use of Makefile.inc:
      # FIXME: Remove in 2013
      #        (along with last minute rename in func_install_pkgltdl_files)
      if test nonrecursive = "$ltdl_mode"; then
	if func_grep "^-\?include $ltdl_dir/Makefile.inc\$" Makefile.am;
	then
	  func_error "Use of 'include $ltdl_dir/Makefile.inc' is deprecated!"
	  func_echo "Consider updating to use of 'include $ltdl_dir/ltdl.mk' in Makefile.am."
	fi
      fi
    fi

    # Suggest modern idioms for storing autoconf macros:
    $ac_config_macro_dir_advised || if test -z "$macro_dir" || test . = "$macro_dir"; then
      func_echo "Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to $configure_ac and"
      func_echo "rerunning $progname, to keep the correct libtool macros in-tree."
      ac_config_macro_dir_advised=:

    elif test -z "$ac_macro_dir"; then
      func_echo "Consider adding 'AC_CONFIG_MACRO_DIRS([$macro_dir])' to $configure_ac,"
      func_echo "and rerunning $progname and aclocal."
      ac_config_macro_dir_advised=:
    fi

    if test -z "$am_macro_dir$ac_macro_dir"; then
      func_echo "Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am."

    elif test -z "$am_macro_dir"; then
      func_echo "Consider adding '-I $macro_dir' to ACLOCAL_AMFLAGS in Makefile.am."
    fi

    # Don't trace for this, we're just checking the user didn't invoke it
    # directly from configure.ac.
    $SED 's|dnl .*$||; s|# .*$||' "$configure_ac" | grep AC_PROG_RANLIB >/dev/null &&
      func_echo "'AC_PROG_RANLIB' is rendered obsolete by 'LT_INIT'"

    # FIXME: Ensure ltmain.sh, libtool.m4 and ltdl.m4 are from the same release
}



## ------------------##
## Helper functions. ##
## ------------------##

# This section contains the helper functions used by the rest of
# this script.


# func_autoconf_configure MAYBE-CONFIGURE-FILE
# --------------------------------------------
# Ensure that MAYBE-CONFIGURE-FILE is the name of a file in the current
# directory which contains an uncommented call to AC_INIT.
func_autoconf_configure ()
{
    $debug_cmd

    _G_sed_no_comment='s|#.*$||; s|^dnl .*$||; s| dnl .*$||;'
    _G_ac_init=

    # If we were passed a genuine file, make sure it calls AC_INIT.
    test -f "$1" \
      && _G_ac_init=`$SED "$_G_sed_no_comment" "$1" |grep AC_INIT`

    # Otherwise it is not a genuine Autoconf input file.
    test -n "$_G_ac_init"
    _G_status=$?

    test 0 -ne "$_G_status" \
      && func_verbose "'$1' not using Autoconf"

    (exit $_G_status)
}


# func_make_relative_dir_filter CURRDIR SRCDIR DESTDIR [PREFIX [SUFFIX]]
# ----------------------------------------------------------------------
# Make a sed script suitable for appending to a copy filter, which will
# replace occurrences of CURRDIR with the relative path from SRCDIR to
# DESTDIR if they are different, otherwise the result is the empty
# string:
#
#    func_make_relative_dir_filter ltdl config ../build-aux
#      => 's|\.\./build-aux|../config|g'
#    func_make_relative_dir_filter ltdl ltdl/m4 ../m4
#      => 's|\.\./m4|m4|g'
#    func_make_relative_dir_filter libltdl build-aux ../build-aux
#      => ''
#
# If PREFIX (and SUFFIX) are passed they are prepended (and appended)
# to the match and replacement expressions literally:
#
#    func_make_relative_dir_filter ltdl ltdl/m4 ../m4 '-I ' ' '
#      => 's|-I \.\./m4 |-I m4 |g'
func_make_relative_dir_filter ()
{
    $debug_cmd

    my_currdir=$1
    my_srcdir=$2
    my_destdir=$3

    func_relative_path "$my_srcdir" "$my_destdir"

    if test "$my_currdir" = "$func_relative_path_result"; then
      func_make_relative_dir_filter_result=
    else
      my_match_currdir=`$ECHO "$my_currdir" |$SED "$sed_make_literal_regex"`

      # Avoid substituting with 'dir/./file' when current dir is '.'.
      if test . = "$my_currdir"; then
        func_make_relative_dir_filter_result="
          s|$4$my_match_currdir/$5|$4$5|g"
      else
        func_make_relative_dir_filter_result="
          s|$4$my_match_currdir$5|$4$func_relative_path_result$5|g"
      fi
    fi
}

# func_make_relative_ltdl_filter CURRDIR DESTDIR [PREFIX [SUFFIX]]
# ----------------------------------------------------------------
# As 'func_make_relative_dir_filter' optimised for the common case where
# SRCDIR is '$ltdl_dir'.
func_make_relative_ltdl_filter ()
{
    $debug_cmd

    $require_ltdl_dir

    func_make_relative_dir_filter "$1" "$ltdl_dir" "$2" "$3" "$4"
    func_make_relative_ltdl_filter_result=$func_make_relative_dir_filter_result
}


## -------------------- ##
## Resource management. ##
## -------------------- ##

# This section contains definitions for functions that each ensure a
# particular resource (a file, or a non-empty configuration variable for
# example) is available, and if appropriate to extract default values
# from pertinent package files.  Where a variable already has a non-
# empty value (as set by the package's 'bootstrap.conf'), that value is
# used in preference to deriving the default. Call them using their
# associated 'require_*' variable to ensure that they are executed, at
# most, once.
#
# Some of the require functions are very similar, so we generate those
# as this file is sourced. They look complicated, but they are the same
# as normal function declarations wrapped in "eval '<definition>'", so
# that embedded single quotes need to be escaped, and wherever a symbol
# is generated, we drop out of the single quotes and expand a variable
# that holds the symbol.
#
# After that, the rest appear in asciibetical order.

for base in '' ltdl_; do
  if test ltdl_ = "$base"; then p='$pkgltdldir/'; else p=; fi

  # require_Makefile_am
  # require_ltdl_Makefile_am
  # ------------------------
  # If not already set, set Makefile_am to 'Makefile.am' if that file is
  # present in the current directory, and similarly for
  # '$pkgltdldir/Makefile.am'.
  r=${base}Makefile_am
  v=require_$r
  f=func_$v
  eval $v'='$f'
  '$f' ()
  {
    $debug_cmd

    test -n "$'$r'" || '$r'='$p'Makefile.am

    if test -f "$'$r'"; then
      func_verbose "found '\'\$$r\''"
    else
      '$r'=
    fi

    '$v'=:
  }'
  o=$r


  # require_aclocal_amflags
  # require_ltdl_aclocal_amflags
  # ----------------------------
  # Extract '$aclocal_amflags' from 'Makefile.am' if present, and
  # similarly for 'libltdl/Makefile.am'.
  r=${base}aclocal_amflags
  v=require_$r
  f=func_$v
  eval $v'='$f'
  '$f' ()
  {
    $debug_cmd

    $require_'$o'

    test -n "$'$o'" && {
      _G_sed_extract_aclocal_amflags='\''s|#.*$||
        /^[	 ]*ACLOCAL_AMFLAGS[	 ]*=/ {
            s|^.*=[	 ]*\(.*\)|'$r'="\1"|
            p
        }'\''

      _G_aclocal_flags_cmd=`$SED -n "$_G_sed_extract_aclocal_amflags" \
          "$'$o'"`
      eval "$_G_aclocal_flags_cmd"

      test -n "$'$r'" && func_verbose "'$r'='\$$r\''"
    }

    '$v'=:
  }'
  o=$r


  # require_am_macro_dir
  # require_ltdl_am_macro_dir
  # -------------------------
  # Set am_macro_dir to the first directory specified in
  # ACLOCAL_AMFLAGS from 'Makefile.am', and similarly for
  # 'libltdl/Makefile.am'.
  r=${base}am_macro_dir
  v=require_$r
  f=func_$v
  eval $v'='$f'
  '$f' ()
  {
    $debug_cmd

    $require_'$o'

    _G_minus_I_seen=false
    for _G_arg in $'$o'; do
      case $_G_minus_I_seen,$_G_arg in
        :,*)   '$r'=$_G_arg; break ;;
        *,-I)  _G_minus_I_seen=: ;;
        *,-I*) '$r'=`expr x$_G_arg : '\''x-I\(.*\)$'\''`; break ;;
      esac
    done

    test -n "$'$r'" && func_verbose "'$r'='\'\$$r\''"

    '$v'=:
  }'
  o=$r

done


# require_ac_aux_dir
# ------------------
# Extract ac_aux_dir from AC_CONFIG_AUX_DIR.
require_ac_aux_dir=func_require_ac_aux_dir
func_require_ac_aux_dir ()
{
    $debug_cmd

    $require_configure_ac

    test -n "$configure_ac" && {
      func_extract_trace_first AC_CONFIG_AUX_DIR
      ac_aux_dir=$func_extract_trace_first_result

      case $ac_aux_dir in
        *\$*)
          func_fatal_error "\
cannot expand unknown variable in AC_CONFIG_AUX_DIR argument."
          ;;
      esac
    }

    test -n "$ac_aux_dir" && func_verbose "ac_aux_dir='$ac_aux_dir'"

    require_ac_aux_dir=:
}


# require_ac_ltdl_dir
# -------------------
# Extract ac_ltdl_dir from LT_CONFIG_LTDL_DIR.
require_ac_ltdl_dir=func_require_ac_ltdl_dir
func_require_ac_ltdl_dir ()
{
    $debug_cmd

    $require_configure_ac

    if test -n "$configure_ac"; then
      func_extract_trace_first LT_CONFIG_LTDL_DIR
      ac_ltdl_dir=$func_extract_trace_first_result

      case $ac_ltdl_dir in
        *\$*)
          func_fatal_error "\
cannot expand unknown variable in LT_CONFIG_LTDL_DIR argument."
          ;;
      esac
    fi

    # Strip trailing slashes.
    ac_ltdl_dir=`echo "$ac_ltdl_dir" |$SED 's|/*$||'`

    require_ac_ltdl_dir=:
}


# require_ac_ltdl_mode
# --------------------
# Extract mode name from LTDL_INIT options.
require_ac_ltdl_mode=func_require_ac_ltdl_mode
func_require_ac_ltdl_mode ()
{
    $debug_cmd

    $require_ac_ltdl_options

    case " $ac_ltdl_options " in
      *" nonrecursive "*) ac_ltdl_mode=nonrecursive ;;
      *" recursive "*)    ac_ltdl_mode=recursive    ;;
      *" subproject "*)   ac_ltdl_mode=subproject   ;;
    esac

    require_ac_ltdl_mode=:
}


# require_ac_ltdl_options
# -----------------------
# Extract ac_ltdl_options from LTDL_INIT.
require_ac_ltdl_options=func_require_ac_ltdl_options
func_require_ac_ltdl_options ()
{
    $debug_cmd

    $require_configure_ac

    if test -n "$configure_ac"; then
      func_extract_trace_first LTDL_INIT
      ac_ltdl_options=$func_extract_trace_first_result

      case $ac_ltdl_options in
        *\$*)
          func_fatal_error "\
cannot expand unknown variable in LTDL_INIT argument."
          ;;
      esac
    fi

    require_ac_ltdl_mode=:
}


# require_ac_macro_dir
# --------------------
# Extract ac_macro_dir from AC_CONFIG_MACRO_DIRS.
require_ac_macro_dir=func_require_ac_macro_dir
func_require_ac_macro_dir ()
{
    $debug_cmd

    $require_configure_ac

    if test -n "$configure_ac"; then
      func_extract_trace_first AC_CONFIG_MACRO_DIRS
      ac_macro_dir=`expr "x$func_extract_trace_first_result" : 'x\([^	 ]*\)'`

      test -n "$ac_macro_dir" || {
        func_extract_trace_first AC_CONFIG_MACRO_DIR
	ac_macro_dir=$func_extract_trace_first_result
      }
    fi

    require_ac_macro_dir=:
}


# require_aux_dir
# ---------------
# Set aux_dir according to AC_CONFIG_AUX_DIR or else use the same
# heuristics as Autoconf to intuit an appropriate setting.
require_aux_dir=func_require_aux_dir
func_require_aux_dir ()
{
    $debug_cmd

    $require_ac_aux_dir

    test -z "$aux_dir" && aux_dir=$ac_aux_dir

    # Subproject ltdl without $configure_ac keeps pkgauxfiles in
    # specified --ltdl optarg directory.
    test -z "$aux_dir" && $opt_ltdl && {
      $require_configure_ac

      test -n "$configure_ac" || {
        $require_ltdl_dir
        $require_ltdl_mode

        test subproject = "$ltdl_mode" && aux_dir=$ltdl_dir
      }
    }

    test -z "$aux_dir" && {
      # Try to intuit aux_dir using the same heuristic as Autoconf.
      for _G_dir in . .. ../..; do
        if test -f "$_G_dir/install-sh" || test -f "$_G_dir/install.sh"
        then
          aux_dir=$_G_dir
          break
        fi
      done
    }

    # Use the current directory if all else fails.
    test -z "$aux_dir" && aux_dir=.

    require_aux_dir=:
}


# require_configure_ac
# --------------------
# Ensure that there is a 'configure.ac' or 'configure.in' file in this
# directory, and that '$configure_ac' contains its name.
require_configure_ac=func_require_configure_ac
func_require_configure_ac ()
{
    $debug_cmd

    test -z "$configure_ac" \
      && func_autoconf_configure configure.ac && configure_ac=configure.ac
    test -z "$configure_ac" \
      && func_autoconf_configure configure.in && configure_ac=configure.in
    test -z "$configure_ac" \
      || func_verbose "found '$configure_ac'"

    require_configure_ac=:
}


# require_filter_Makefile_am
# --------------------------
# Set 'filter_Makefile_am' ready for passing to func_copy when libltdl's
# stock Makefile.am contents need to be filtered to work in recursive
# mode.
require_filter_Makefile_am=func_require_filter_Makefile_am
func_require_filter_Makefile_am ()
{
    $debug_cmd

    $require_ltdl_mode

    case $ltdl_mode in
      recursive)
        filter_Makefile_am='
            /^[^#]/{
              s|(LIBOBJS)|(ltdl_LIBOBJS)|g
              s|(LTLIBOBJS)|(ltdl_LTLIBOBJS)|g
            }'
        ;;

      subproject)
        # Adjust default relative macro_dir paths.
        $require_ltdl_am_macro_dir

        func_make_relative_ltdl_filter "$ltdl_am_macro_dir" "$macro_dir" '-I '
        test -z "$func_make_relative_ltdl_filter_result" || {
          func_append filter_Makefile_am "
              /^ACLOCAL_AMFLAGS = /{
                $func_make_relative_ltdl_filter_result
              }"
        }
        func_make_relative_ltdl_filter "$ltdl_am_macro_dir" "$macro_dir" 'dir)'
        func_append filter_Makefile_am "$func_make_relative_ltdl_filter_result"

        # Adjust default relative aux_dir paths.
        $require_ltdl_ac_aux_dir
        func_make_relative_ltdl_filter "$ltdl_ac_aux_dir" "$aux_dir"
        func_append filter_Makefile_am "$func_make_relative_ltdl_filter_result"
        ;;
    esac

    require_filter_Makefile_am=:
}


# require_filter_aclocal_m4
# -------------------------
# Set 'filter_aclocal_m4' ready for passing to func_copy when libltdl's
# stock aclocal.m4 contents need to be filtered to work in recursive
# mode.
require_filter_aclocal_m4=func_require_filter_aclocal_m4
func_require_filter_aclocal_m4 ()
{
    $debug_cmd

    $require_ltdl_am_macro_dir

    func_make_relative_ltdl_filter "$ltdl_am_macro_dir" "$macro_dir"

    test -z "$func_make_relative_ltdl_filter_result" || {
      func_append filter_aclocal_m4 "
          /^[m]4_include(/{
            $func_make_relative_ltdl_filter_result
          }"
    }

    require_filter_aclocal_m4=:
}


# require_filter_configure_ac
# ---------------------------
# Set 'filter_configure_ac' ready for passing to func_copy when
# libltdl's stock configure.ac contents need to be filtered to work in
# subproject mode.
require_filter_configure_ac=func_require_filter_configure_ac
func_require_filter_configure_ac ()
{
    $debug_cmd

    $require_ltdl_ac_aux_dir

    func_make_relative_ltdl_filter "$ltdl_ac_aux_dir" "$aux_dir"
    func_append filter_configure_ac "$func_make_relative_ltdl_filter_result"

    require_filter_configure_ac=:
}


# require_filter_ltdl_mk
# ----------------------
# Set 'filter_ltdl_mk' ready for passing to func_copy in order for the
# contents of ltdl.mk to match the nonrecursive libltdl directory into
# which it is copied.
require_filter_ltdl_mk=func_require_filter_ltdl_mk
func_require_filter_ltdl_mk ()
{
    $debug_cmd

    $require_ltdl_dir

    # Note that we strip comments right here, rather than rely on
    # using a $SED that allows comments.
    my_uscore=`$ECHO "$ltdl_dir" | $SED 's|[/.+-]|_|g'`
    filter_ltdl_mk=`$ECHO '
      /^[^#]/{

        # Use only libltdl conditional objects.
        s|(LIBOBJS)|(ltdl_LIBOBJS)|g
        s|(LTLIBOBJS)|(ltdl_LTLIBOBJS)|g

        # Convert libltdl path and variable sections to $ltdl_dir.
        s|libltdl_|@my_uscore@_|
        s|libltdl/|@ltdl_dir@/|
        s|: libltdl/|: @ltdl_dir@/|
        s| -Ilibltdl | -I@ltdl_dir@ |
        s|\$(libltdl_|\$(@my_uscore@_|
        s|)/libltdl |)/@ltdl_dir@ |
        s|@my_uscore@|'"$my_uscore"'|g
        s|@ltdl_dir@|'"$ltdl_dir"'|g

      }' | $SED '/^[	 ]*#/d;/^$/d'`

    require_filter_ltdl_mk=:
}


# require_ltdl_ac_aux_dir
# -----------------------
# This needs to work in subproject mode, when GNU M4 may not be
# available and hence extract-trace can't be used.  But since we
# installed libltdl/configure.ac, then we already know what value
# we used.
require_ltdl_ac_aux_dir=func_require_ltdl_ac_aux_dir
func_require_ltdl_ac_aux_dir ()
{
    $debug_cmd

    ltdl_ac_aux_dir="@ltdl_ac_aux_dir@"
    func_verbose "ltdl_ac_aux_dir='$ltdl_ac_aux_dir'"

    require_ltdl_ac_aux_dir=:
}


# require_ltdl_dir
# ----------------
# If both are specified, ensure both --ltdl=LTDL_DIR and
# LT_CONFIG_LTDL_DIR agree, and set ltdl_dir to the value of either.
require_ltdl_dir=func_require_ltdl_dir
func_require_ltdl_dir ()
{
    $debug_cmd

    $require_ac_ltdl_dir

    test -z "$ltdl_dir" && ltdl_dir=$ac_ltdl_dir
    test -z "$ltdl_dir" && $opt_ltdl && ltdl_dir=libltdl

    if test -n "$ac_ltdl_dir"; then
      test "$ac_ltdl_dir" = "$ltdl_dir" || func_fatal_error "\
--ltdl='$ltdl_dir' does not match LT_CONFIG_LTDL_DIR($ac_ltdl_dir)"
    fi

    require_ltdl_dir=:
}


# require_ltdl_mode
# -----------------
# If both are specified, ensure both command line setting and LTDL_INIT
# option agree, and set ltdl_mode to the value of either.
require_ltdl_mode=func_require_ltdl_mode
func_require_ltdl_mode ()
{
    $debug_cmd

    $require_ac_ltdl_mode

    test -z "$ltdl_mode" && ltdl_mode=$ac_ltdl_mode
    test -z "$ltdl_mode" && {
      $require_ltdl_dir

      test -n "$ltdl_dir" && ltdl_mode=subproject
    }

    if test -n "$ac_ltdl_mode"; then
      test "$ac_ltdl_mode" = "$ltdl_mode" || func_fatal_error "\
--$ltdl_mode does not match LTDL_INIT($ac_ltdl_mode)"
    fi

    func_verbose "ltdl mode='$ltdl_mode'"

    require_ltdl_mode=:
}


# require_macro_dir
# -----------------
# If both are specified, ensure both ACLOCAL_AMFLAGS and
# AC_CONFIG_MACRO_DIRS agree, and set macro_dir to the value of either.
require_macro_dir=func_require_macro_dir
func_require_macro_dir ()
{
    $debug_cmd

    $require_ac_macro_dir
    $require_am_macro_dir

    # AC_CONFIG_MACRO_DIRS takes precedence.
    macro_dir=$ac_macro_dir

    # Followed by first -I optarg from ACLOCAL_AMFLAGS.
    test -z "$macro_dir" && macro_dir=$am_macro_dir

    # Subproject ltdl without either of the above keeps macros in
    # specified --ltdl optarg subdirectory.
    test -z "$macro_dir" && $opt_ltdl && {
      $require_ltdl_dir
      $require_ltdl_mode

      test subproject = "$ltdl_mode" && macro_dir=$ltdl_dir/m4
    }

    # Use ./m4 as the last resort.
    test -z "$macro_dir" && macro_dir=m4

    # Diagnose conflicts.
    if test -n "$ac_macro_dir" && test -n "$am_macro_dir"; then
      test "$ac_macro_dir" = "$am_macro_dir" || func_fatal_error "\
AC_CONFIG_MACRO_DIRS([$ac_macro_dir]) conflicts with ACLOCAL_AMFLAGS=-I $am_macro_dir."
    fi

    require_macro_dir=:
}


# require_seen_ltdl
# -----------------
# Determine from contents of $configure_ac whether this project contains
# libltdl.
require_seen_ltdl=func_require_seen_ltdl
func_require_seen_ltdl ()
{
    $debug_cmd

    $require_configure_ac

    if test -n "$configure_ac"; then
      func_extract_trace AC_LIB_LTDL,AC_WITH_LTDL,LT_WITH_LTDL,LTDL_INIT
      test -n "$func_extract_trace_result" && seen_ltdl=:
    fi
    test -n "$seen_ltdl" || seen_ltdl=false

    $seen_ltdl && func_verbose "found LTDL_INIT invocation"

    require_seen_ltdl=:
}


# require_seen_libtool
# --------------------
# Determine from contents of $configure_ac whether this project is using
# Libtool to compile (some of) its objects.
require_seen_libtool=func_require_seen_libtool
func_require_seen_libtool ()
{
    $debug_cmd

    $require_configure_ac

    if test -n "$configure_ac"; then
      func_extract_trace AM_PROG_LIBTOOL,AC_PROG_LIBTOOL,LT_INIT
      test -n "$func_extract_trace_result" && seen_libtool=:
    fi
    test -n "$seen_libtool" || seen_libtool=false

    $seen_libtool && func_verbose "found LT_INIT invocation"

    require_seen_libtool=:
}



## ----------- ##
##    Main.    ##
## ----------- ##

{
  # Lists of all files libtoolize has ever installed.  These are removed
  # before installing the latest files when --force was passed to help
  # ensure a clean upgrade.
  # Do not remove config.guess nor config.sub, we don't install them
  # without --install, and the project may not be using Automake.
  all_pkgaux_files="compile install-sh depcomp missing ltmain.sh snippet/_Noreturn.h snippet/arg-nonnull.h snippet/c++defs.h snippet/warn-on-use.h"
  all_pkgmacro_files="argz.m4 libtool.m4 ltdl.m4 ltoptions.m4 ltsugar.m4 ltversion.in ltversion.m4 lt~obsolete.m4"
  all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am README acinclude.m4 aclocal.m4 argz_.h argz.c config.h.in config-h.in configure configure.ac configure.in libltdl/lt__alloc.h libltdl/lt__dirent.h libltdl/lt__glibc.h libltdl/lt__private.h libltdl/lt__strl.h libltdl/lt_dlloader.h libltdl/lt_error.h libltdl/lt_system.h libltdl/slist.h loaders/dld_link.c loaders/dlopen.c loaders/dyld.c loaders/load_add_on.c loaders/loadlibrary.c loaders/preopen.c loaders/shl_load.c lt__alloc.c lt__dirent.c lt__strl.c lt_dlloader.c lt_error.c ltdl.c ltdl.h ltdl.mk slist.c"

  # Files installed by func_install_*, some files are missing from these
  # lists deliberately because their respective func_install has to handle
  # the missing filenames specially.
  pkgaux_files="@pkgaux_files@"
  pkgltdl_files="@pkgltdl_files@"
  pkgmacro_files="@pkgmacro_files@"

  # Locations for important files:
  prefix="@prefix@"
  datadir="@datadir@"
  pkgauxdir="@pkgauxdir@"
  pkgltdldir="@pkgdatadir@"
  aclocaldir="@aclocaldir@"

  # Allow the user to override the master libtoolize repository:
  if test -n "$_lt_pkgdatadir"; then
    pkgauxdir=$_lt_pkgdatadir/build-aux
    pkgltdldir=$_lt_pkgdatadir/libltdl
    aclocaldir=$_lt_pkgdatadir/m4
  fi
  func_nonemptydir_p pkgauxdir
  func_nonemptydir_p pkgltdldir
  func_nonemptydir_p aclocaldir

  extract_trace=$pkgauxdir/extract-trace

  # :::BE CAREFUL HERE:::
  # func_check_macros needs to check whether --ltdl was specified when
  # LTDL_INIT was not seen, so we can't just use one variable for both
  # conditions, or that check will be impossible.   No need to clutter the
  # rest of the code with '$opt_ltdl || $seen_ltdl' though, because we CAN
  # safely set opt_ltdl to true if LTDL_INIT was seen:
  $require_seen_ltdl
  $seen_ltdl && opt_ltdl=:

  func_install_pkgaux_files
  func_install_pkgmacro_files
  func_install_pkgltdl_files

  func_check_macros
}

exit $exit_status

# Local Variables:
# mode:shell-script
# sh-indentation:2
# End: