README.md.orig

This is signal system for pantry.
It will control climate of pantry to smart house.

It will uses autonomous power system
1. car battery on 12v
2. temporary Li-Ion battary on 12v for charging primary battery
3. internal battery (6V..15V) which will used in case of primary and reserve 12V battery discharged. Used to send power alarm to smart house
4. Auto battary hot switch
5. Control over-discharge of all batteries
6. Provide information of current voltage to controller
7. Small current consumption. I plan to charge main battary once per ~6 month. 

It will collect and send next information (incl alarms):
1. Inside flooding alarm
2. Outside flooding alarm
3. Inside humidity level
4. Inside temperature
5. Inside light level
6. Open door alarm
7. Current voltage of all batteries
8. Current battery in use
9. Both 12V batteries discharged alarm 

It will automatically switch on air-drier basing on humidity level

It will have air fan system
1. Manual swotch on
2. Manual swotch off
3. Auto switch off after ~20 minutes

It will send all collected information to smart house system using LoRa channel

Project status

| Hardware | Status |
| --- | --- |
| Supply module | OK |
| Supply module :: Supply controller | OK |
| Logic module :: Flooding sensors | OK |
| Logic module :: Light sensor | OK |
| Logic module :: display | OK |
| Logic module :: humidity and temperature | OK |
| Logic module :: air dryer | OK |
| Logic module :: LoRa transmitter | OK |
| Logic module :: Open door alarm | OK |
| Logic module :: Wakeup button | OK |
| Air fan module | OK |
| LoRa receiver and smart house integration | not tested, but I think it will works. I have no components at now. I will order board and test it after it came to me |

| Firmware | Status |
| --- | --- |
| Supply controller | OK |
| Logic controller :: flooding sensors | OK |
| Logic controller :: light sensor | OK |
| Logic controller :: display | OK |
| Logic controller :: humidity and temperature | OK |
| Logic controller :: air dryer | OK |
| Logic controller :: LoRa transmitter | OK |
| Logic controller :: Open door alarm | OK |
| Logic controller :: Wakeup button and deep sleep mode | OK |
| Logic controller :: Integration with supply controller | OK |
| LoRa receiver and smart house integration | not tested |

| Board | Status |
| --- | --- |
| Supply board | OK |
| logic module board | OK |
| fan board | OK |
| LoRa Receiver | OK |

| 3D models | Status |
| --- | --- |
| Supply board box | no |
| Logic model box | no |
| Air dryer | OK |
| Fan box | no |
<<<<<<< HEAD
| Fan air intake | OK |
=======
| Fan air intake | not tested |
>>>>>>> 13f30f840bbd940180a249eac24584e1a01e1548