| Name | Type | Description | Notes |
|---|---|---|---|
| Comments | Pointer to NullableString | Optional field for arbitrary User comments on this Config. | [optional] |
| Devices | Pointer to GetLinodeConfigs200ResponseDataInnerDevices | [optional] | |
| Helpers | Pointer to GetLinodeConfigs200ResponseDataInnerHelpers | [optional] | |
| Id | Pointer to int32 | The ID of this Config. | [optional] [readonly] |
| Interfaces | Pointer to []PostLinodeInstanceRequestAllOfInterfacesInner | An array of Network Interfaces to add to this Linode's Configuration Profile. At least one and up to three Interface objects can exist in this array. The position in the array determines which of the Linode's network Interfaces is configured: - First [0]: eth0 - Second [1]: eth1 - Third [2]: eth2 When updating a Linode's Interfaces, each Interface must be redefined. An empty `interfaces` array results in a default `public` type Interface configuration only. If no public Interface is configured, public IP addresses are still assigned to the Linode but will not be usable without manual configuration. Note. Changes to Linode Interface configurations can be enabled by rebooting the Linode. `vpc` details See the VPC documentation guide for its specifications and limitations. `vlan` details - Only Next Generation Network (NGN) data centers support VLANs. Run the List regions operation to view the capabilities of data center regions. If a VLAN is attached to your Linode and you attempt to migrate or clone it to a non-NGN data center, the migration or cloning will not initiate. If a Linode cannot be migrated or cloned because of an incompatibility, you will be prompted to select a different data center or contact support. - See the VLANs Overview guide to view additional specifications and limitations. | [optional] |
| Kernel | Pointer to string | A Kernel ID to boot a Linode with. Here are examples of commonly used kernels: - `linode/latest-64bit` (default): Our latest kernel at the time of instance boot/reboot. - `linode/grub2`: The upstream distribution-supplied kernel that is installed on the primary disk, or a custom kernel if installed. - `linode/direct-disk`: The MBR (Master Boot Record) of the primary disk/root device, used instead of a Linux kernel. For a complete list of options, run the List kernels operation. | [optional] [default to "linode/latest-64bit"] |
| Label | Pointer to string | The Config's label is for display purposes only. | [optional] |
| MemoryLimit | Pointer to int32 | Defaults to the total RAM of the Linode. | [optional] |
| RootDevice | Pointer to string | The root device to boot. - If no value or an invalid value is provided, root device will default to `/dev/sda`. - If the device specified at the root device location is not mounted, the Linode will not boot until a device is mounted. | [optional] |
| RunLevel | Pointer to string | Defines the state of your Linode after booting. Defaults to `default`. | [optional] |
| VirtMode | Pointer to string | Controls the virtualization mode. Defaults to `paravirt`. - `paravirt` is suitable for most cases. Linodes running in paravirt mode share some qualities with the host, ultimately making it run faster since there is less transition between it and the host. - `fullvirt` affords more customization, but is slower because 100% of the VM is virtualized. | [optional] |
func NewGetLinodeConfigs200ResponseDataInner() *GetLinodeConfigs200ResponseDataInner
NewGetLinodeConfigs200ResponseDataInner instantiates a new GetLinodeConfigs200ResponseDataInner object This constructor will assign default values to properties that have it defined, and makes sure properties required by API are set, but the set of arguments will change when the set of required properties is changed
func NewGetLinodeConfigs200ResponseDataInnerWithDefaults() *GetLinodeConfigs200ResponseDataInner
NewGetLinodeConfigs200ResponseDataInnerWithDefaults instantiates a new GetLinodeConfigs200ResponseDataInner object This constructor will only assign default values to properties that have it defined, but it doesn't guarantee that properties required by API are set
func (o *GetLinodeConfigs200ResponseDataInner) GetComments() string
GetComments returns the Comments field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetCommentsOk() (*string, bool)
GetCommentsOk returns a tuple with the Comments field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetComments(v string)
SetComments sets Comments field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasComments() bool
HasComments returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetCommentsNil(b bool)
SetCommentsNil sets the value for Comments to be an explicit nil
func (o *GetLinodeConfigs200ResponseDataInner) UnsetComments()
UnsetComments ensures that no value is present for Comments, not even an explicit nil
func (o *GetLinodeConfigs200ResponseDataInner) GetDevices() GetLinodeConfigs200ResponseDataInnerDevices
GetDevices returns the Devices field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetDevicesOk() (*GetLinodeConfigs200ResponseDataInnerDevices, bool)
GetDevicesOk returns a tuple with the Devices field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetDevices(v GetLinodeConfigs200ResponseDataInnerDevices)
SetDevices sets Devices field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasDevices() bool
HasDevices returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetHelpers() GetLinodeConfigs200ResponseDataInnerHelpers
GetHelpers returns the Helpers field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetHelpersOk() (*GetLinodeConfigs200ResponseDataInnerHelpers, bool)
GetHelpersOk returns a tuple with the Helpers field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetHelpers(v GetLinodeConfigs200ResponseDataInnerHelpers)
SetHelpers sets Helpers field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasHelpers() bool
HasHelpers returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetId() int32
GetId returns the Id field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetIdOk() (*int32, bool)
GetIdOk returns a tuple with the Id field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetId(v int32)
SetId sets Id field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasId() bool
HasId returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetInterfaces() []PostLinodeInstanceRequestAllOfInterfacesInner
GetInterfaces returns the Interfaces field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetInterfacesOk() (*[]PostLinodeInstanceRequestAllOfInterfacesInner, bool)
GetInterfacesOk returns a tuple with the Interfaces field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetInterfaces(v []PostLinodeInstanceRequestAllOfInterfacesInner)
SetInterfaces sets Interfaces field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasInterfaces() bool
HasInterfaces returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetKernel() string
GetKernel returns the Kernel field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetKernelOk() (*string, bool)
GetKernelOk returns a tuple with the Kernel field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetKernel(v string)
SetKernel sets Kernel field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasKernel() bool
HasKernel returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetLabel() string
GetLabel returns the Label field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetLabelOk() (*string, bool)
GetLabelOk returns a tuple with the Label field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetLabel(v string)
SetLabel sets Label field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasLabel() bool
HasLabel returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetMemoryLimit() int32
GetMemoryLimit returns the MemoryLimit field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetMemoryLimitOk() (*int32, bool)
GetMemoryLimitOk returns a tuple with the MemoryLimit field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetMemoryLimit(v int32)
SetMemoryLimit sets MemoryLimit field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasMemoryLimit() bool
HasMemoryLimit returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetRootDevice() string
GetRootDevice returns the RootDevice field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetRootDeviceOk() (*string, bool)
GetRootDeviceOk returns a tuple with the RootDevice field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetRootDevice(v string)
SetRootDevice sets RootDevice field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasRootDevice() bool
HasRootDevice returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetRunLevel() string
GetRunLevel returns the RunLevel field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetRunLevelOk() (*string, bool)
GetRunLevelOk returns a tuple with the RunLevel field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetRunLevel(v string)
SetRunLevel sets RunLevel field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasRunLevel() bool
HasRunLevel returns a boolean if a field has been set.
func (o *GetLinodeConfigs200ResponseDataInner) GetVirtMode() string
GetVirtMode returns the VirtMode field if non-nil, zero value otherwise.
func (o *GetLinodeConfigs200ResponseDataInner) GetVirtModeOk() (*string, bool)
GetVirtModeOk returns a tuple with the VirtMode field if it's non-nil, zero value otherwise and a boolean to check if the value has been set.
func (o *GetLinodeConfigs200ResponseDataInner) SetVirtMode(v string)
SetVirtMode sets VirtMode field to given value.
func (o *GetLinodeConfigs200ResponseDataInner) HasVirtMode() bool
HasVirtMode returns a boolean if a field has been set.