SOLED is a simple python-based library that can be used to operate various SSD/SH-driver OLED displays with a Raspberry Pi.
A list of all display modules SOLED is currently compatible is available below.
SOLED is fairly simple to install.
First, perform a simple update.
sudo apt -y update && sudo apt -y upgrade
Next, we can begin setting up some dependencies by:
sudo python -m pip install --upgrade pip setuptools wheel
Finally, we install SOLED using:
git clone https://github.com/1zc/SOLED.git && cd SOLED && sudo python setup.py install
To install using Python3, replace python with python3 and pip with pip3 in the above instructions.
This list can also be found in DISPLAYS.txt (If a display module is marked compatible, it applies for both i2C and SPI variants.)
| Module | Resolution | Compatibility | Status |
|---|---|---|---|
| SSD1306 | 128x64 | ✔️ Compatible | ✔️ Tested |
| SSD1306 | 128x32 | ✔️ Compatible | ✔️ Tested |
| SSD1306 | 96x16 | ✔️ Compatible | ☀️ Not Tested |
| SSD1306 | 96x48 | ✔️ Compatible | ✔️ Tested |
| SSD1306 | 64x48 | ✔️ Compatible | ☀️ Not Tested |
| SSD1306 | 64x32 | ✔️ Compatible | ☀️ Not Tested |
| SSD1306 | 72x40 | ❌ Incompatible | 🔄 Will be added soon |
| SSD1306 | 96x64 | ❌ Incompatible | 🔄 Will be added soon |
| SSD1306 | 128x128 | ❌ Incompatible | 🔄 Will be added soon |
| // | // | // | // |
| SH1106 | 128x64 | ✔️ Compatible | 🌐 In dev. Please create an issue if there are any problems! |
| // | // | // | // |
| SSD1351 | 128x64 | ❌ Incompatible | 🌐 In dev. |
| SSD1351 | 128x32 | ❌ Incompatible | 🌐 In dev. |