Merge pull request #151 from MHeironimus/community-updates

Community Updates 1

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,29 @@
+---
+name: Bug report
+about: Create a report to help us improve
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+## Description of Issue
+Enter description of issue here. Include a clear and concise description of what you expected to happen and what actually happened.
+
+## Technical Details
+
+- Arduino Board (e.g. Arduino Leonardo): 
+- Host OS (e.g. Windows 10):
+- Arduino IDE Version (e.g. 1.8.3):
+
+## Sketch File that Reproduces Issue
+
+~~~
+Sketch file goes here (if applicable)
+~~~
+
+## Wiring Details
+Any pin wiring details that may be relevant.
+
+## Additional context
+Add any other context about the problem here.

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,14 @@
+---
+name: Feature request
+about: Suggest an idea for this project
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+**Describe your feature request**
+A clear and concise description of what you feature you would like to see added to the library.
+
+**Additional context**
+Add any other context or screenshots about the feature request here.

.github/ISSUE_TEMPLATE/support-new-board.md

@@ -0,0 +1,10 @@
+---
+name: Support new board
+about: Suggest a new board to support
+title: ''
+labels: ''
+assignees: ''
+
+---
+
+Please indicate which board you would like to see supported.

README.md

@@ -1,8 +1,11 @@
 # Arduino Joystick Library
-#### Version 2.0.5
+
+#### Version 2.0.6
+
 This library can be used with Arduino IDE 1.6.6 (or above) to add one or more joysticks (or gamepads) to the list of HID devices an [Arduino Leonardo](https://www.arduino.cc/en/Main/ArduinoBoardLeonardo) or [Arduino Micro](https://www.arduino.cc/en/Main/ArduinoBoardMicro) (or any Arduino clone that is based on the ATmega32u4) can support. This library will also work with the [Arduino Due](https://www.arduino.cc/en/Main/ArduinoBoardDue), thanks to [@Palakis](https://github.com/Palakis). A complete list of supported boards can be found in the [Wiki](https://github.com/MHeironimus/ArduinoJoystickLibrary/wiki/Supported-Boards). This will not work with Arduino IDE 1.6.5 (or below) or with non-32u4 based Arduino devices (e.g. Arduino UNO, Arduino MEGA, etc.).
 
 ## Features
+
 The joystick or gamepad can have the following features:
 - Buttons (default: 32)
 - Up to 2 Hat Switches
@@ -15,13 +18,14 @@ The joystick or gamepad can have the following features:
 - Steering (up to 16-bit precision)
 
 ## Installation Instructions
-Copy the `Joystick` folder to the Arduino libraries folder. Once the folder has been copied, the Joystick library should appear in the Arduino IDE list of libraries. The examples should also appear in the examples menu in the Arduino IDE.
-### Microsoft Windows
-On Microsoft Windows machines, this is typically `%userprofile%\Documents\Arduino\libraries`. The `deploy.bat` file can be executed to install the Joystick folder on Microsoft Windows machines (assuming a default Arduino installation).
-### Linux
-On Linux machines, this is typically `$HOME/Arduino/libraries`. The `deploy.sh` file can be executed to install the Joystick folder on Linux machines (assuming a default Arduino installation). [Thanks to @Nihlus (Jarl Gullberg) for his help with this.]
+
+The following instructions can be used to install the latest version of the library in the Arduino IDE (thanks to [@per1234](https://github.com/per1234) for this update):
+
+1. Download https://github.com/MHeironimus/ArduinoJoystickLibrary/archive/master.zip
+2. In the Arduino IDE, select `Sketch` > `Include Library` > `Add .ZIP Library...`.  Browse to where the downloaded ZIP file is located and click `Open`. The Joystick library's examples will now appear under `File` > `Examples` > `Joystick`.
 
 ## Examples
+
 The following example Arduino sketch files are included in this library:
 
 - `JoystickTest` - Simple test of the Joystick library. It exercises many of the Joystick library’s functions when pin A0 is grounded.
@@ -35,42 +39,46 @@ The following example Arduino sketch files are included in this library:
 
 ### Simple example
 
-	#include <Joystick.h>
-
-	// Create the Joystick
-	Joystick_ Joystick;
-
-	// Constant that maps the phyical pin to the joystick button.
-	const int pinToButtonMap = 9;
-
-	void setup() {
-	  // Initialize Button Pins
-	  pinMode(pinToButtonMap, INPUT_PULLUP);
-
-	  // Initialize Joystick Library
-	  Joystick.begin();
-	}
-
-	// Last state of the button
-	int lastButtonState = 0;
-
-	void loop() {
-
-	  // Read pin values
-      int currentButtonState = !digitalRead(pinToButtonMap);
-	  if (currentButtonState != lastButtonState)
-	  {
-	    Joystick.setButton(0, currentButtonState);
-	    lastButtonState = currentButtonState;
-	  }
-
-	  delay(50);
+```C++
+#include <Joystick.h>
+
+// Create the Joystick
+Joystick_ Joystick;
+
+// Constant that maps the physical pin to the joystick button.
+const int pinToButtonMap = 9;
+
+void setup() {
+	// Initialize Button Pins
+	pinMode(pinToButtonMap, INPUT_PULLUP);
+
+	// Initialize Joystick Library
+	Joystick.begin();
+}
+
+// Last state of the button
+int lastButtonState = 0;
+
+void loop() {
+
+	// Read pin values
+	int currentButtonState = !digitalRead(pinToButtonMap);
+	if (currentButtonState != lastButtonState)
+	{
+	Joystick.setButton(0, currentButtonState);
+	lastButtonState = currentButtonState;
 	}
 
+	delay(50);
+}
+```
+
 ## Joystick Library API
+
 The following API is available if the Joystick library in included in a sketch file.
 
 ### Joystick\_(...)
+
 Constructor used to initialize and setup the Joystick. The following optional parameters are available:
 
 - `uint8_t hidReportId` - Default: `0x03` - Indicates the joystick's HID report ID. This value must be unique if you are creating multiple instances of Joystick. Do not use `0x01` or `0x02` as they are used by the built-in Arduino Keyboard and Mouse libraries.
@@ -99,90 +107,119 @@ The following constants define the default values for the constructor parameters
 - `JOYSTICK_DEFAULT_HATSWITCH_COUNT` is set to `2`
 
 ### Joystick.begin(bool initAutoSendState)
+
 Starts emulating a game controller connected to a computer. By default, all methods update the game controller state immediately. If `initAutoSendState` is set to `false`, the `Joystick.sendState` method must be called to update the game controller state.
 
 ### Joystick.end()
+
 Stops the game controller emulation to a connected computer.
 
 ### Joystick.setXAxisRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the X axis. Default: `0` to `1023`
 
 ### Joystick.setXAxis(int16_t value)
+
 Sets the X axis value. See `setXAxisRange` for the range.
 
 ### Joystick.setYAxisRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Y axis. Default: `0` to `1023`
 
 ### Joystick.setYAxis(int16_t value)
+
 Sets the Y axis value. See `setYAxisRange` for the range.
 
 ### Joystick.setZAxisRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Z axis. Default: `0` to `1023`
 
 ### Joystick.setZAxis(int16_t value)
+
 Sets the Z axis value. See `setZAxisRange` for the range.
 
 ### Joystick.setRxAxisRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the X axis rotation. Default: `0` to `1023`
 
 ### Joystick.setRxAxis(int16_t value)
+
 Sets the X axis rotation value. See `setRxAxisRange` for the range.
 
 ### Joystick.setRyAxisRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Y axis rotation. Default: `0` to `1023`
 
 ### Joystick.setRyAxis(int16_t value)
+
 Sets the Y axis rotation value. See `setRyAxisRange` for the range.
 
 ### Joystick.setRzAxisRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Z axis rotation. Default: `0` to `1023`
 
 ### Joystick.setRzAxis(int16_t value)
+
 Sets the Z axis rotation value. See `setRzAxisRange` for the range.
 
 ### Joystick.setRudderRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Rudder. Default: `0` to `1023`
 
 ### Joystick.setRudder(int16_t value)
+
 Sets the Rudder value. See `setRudderRange` for the range.
 
 ### Joystick.setThrottleRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Throttle. Default: `0` to `1023`
 
 ### Joystick.setThrottle(int16_t value)
+
 Sets the Throttle value. See `setThrottleRange` for the range.
 
 ### Joystick.setAcceleratorRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Accelerator. Default: `0` to `1023`
 
 ### Joystick.setAccelerator(int16_t value)
+
 Sets the Accelerator value. See `setAcceleratorRange` for the range.
 
 ### Joystick.setBrakeRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Brake. Default: `0` to `1023`
 
 ### Joystick.setBrake(int16_t value)
+
 Sets the Brake value. See `setBrakeRange` for the range.
 
 ### Joystick.setSteeringRange(int16_t minimum, int16_t maximum)
+
 Sets the range of values that will be used for the Steering. Default: `0` to `1023`
 
 ### Joystick.setSteering(int16_t value)
+
 Sets the Steering value. See `setSteeringRange` for the range.
 
 ### Joystick.setButton(uint8_t button, uint8_t value)
+
 Sets the state (`0` or `1`) of the specified button (range: `0` - (`buttonCount - 1`)). The button is the 0-based button number (i.e. button #1 is `0`, button #2 is `1`, etc.). The value is `1` if the button is pressed and `0` if the button is released.
 
 ### Joystick.pressButton(uint8_t button)
+
 Press the indicated button (range: `0` - (`buttonCount - 1`)). The button is the 0-based button number (i.e. button #1 is `0`, button #2 is `1`, etc.).
 
 ### Joystick.releaseButton(uint8_t button)
+
 Release the indicated button (range: `0` - (`buttonCount - 1`)). The button is the 0-based button number (i.e. button #1 is `0`, button #2 is `1`, etc.).
 
 ### Joystick.setHatSwitch(int8_t hatSwitch, int16_t value)
+
 Sets the value of the specified hat switch. The hatSwitch is 0-based (i.e. hat switch #1 is `0` and hat switch #2 is `1`). The value is from 0° to 360°, but in 45° increments. Any value less than 45° will be rounded down (i.e. 44° is rounded down to 0°, 89° is rounded down to 45°, etc.). Set the value to `JOYSTICK_HATSWITCH_RELEASE` or `-1` to release the hat switch.
 
 ### Joystick.sendState()
+
 Sends the updated joystick state to the host computer. Only needs to be called if `AutoSendState` is `false` (see `Joystick.begin` for more details).
 
 See the [Wiki](https://github.com/MHeironimus/ArduinoJoystickLibrary/wiki) for more details on things like FAQ, supported boards, testing, etc.

Joystick/library.properties → library.properties

@@ -1,8 +1,8 @@
 name=Joystick
-version=2.0.5
+version=2.0.6
 author=Matthew Heironimus
 maintainer=Matthew Heironimus <heironimus@live.com>
-sentence=Arduino library that allows an Arduino Leonardo, Arduino Micro, or Arudino Due to appear as a Joystick or Gamepad.
+sentence=Allows an Arduino board with USB capabilities (e.g. Leonardo, Arduino Micro, Arudino Due, etc.) to appear as a Joystick or Gamepad.
 paragraph=This library is built on the PluggableUSB library. It can be used with or without other HID-based libraries (Mouse, Keyboard, etc.).
 category=Device Control
 url=https://github.com/MHeironimus/ArduinoJoystickLibrary

Joystick/src/Joystick.h → src/Joystick.h

@@ -21,7 +21,7 @@
 #ifndef JOYSTICK_h
 #define JOYSTICK_h
 
-#include <DynamicHID/DynamicHID.h>
+#include "DynamicHID/DynamicHID.h"
 
 #if ARDUINO < 10606
 #error The Joystick library requires Arduino IDE 1.6.6 or greater. Please update your IDE.