Process completed with exit code 1.

error: manual `RangeInclusive::contains` implementation --> src/lib.rs:312:30 | 312 | .filter(|&b| b >= 32 && b <= 126) | ^^^^^^^^^^^^^^^^^^^ help: use: `(32..=126).contains(&b)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_range_contains = note: `#[deny(clippy::manual_range_contains)]` implied by `#[deny(warnings)]`

error: redundant closure --> src/py_module.rs:106:22 | 106 | .map_err(|e| Into::<Ka3005pError>::into(e))?) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:77:51 | 77 | inner: find_serial_port().map_err(|e| Into::<Ka3005pError>::into(e))?, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:74:51 | 74 | inner: Ka3005p::new(port).map_err(|e| Into::<Ka3005pError>::into(e))?, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:56:22 | 56 | .map_err(|e| Into::<Ka3005pError>::into(e))?) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:45:22 | 45 | .map_err(|e| Into::<Ka3005pError>::into(e))?) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure note: the lint level is defined here --> src/lib.rs:30:9 | 30 | #![deny(warnings)] | ^^^^^^^^ = note: `#[deny(clippy::redundant_closure)]` implied by `#[deny(warnings)]`

error: manual `RangeInclusive::contains` implementation --> src/lib.rs:312:30 | 312 | .filter(|&b| b >= 32 && b <= 126) | ^^^^^^^^^^^^^^^^^^^ help: use: `(32..=126).contains(&b)` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_range_contains = note: `#[deny(clippy::manual_range_contains)]` implied by `#[deny(warnings)]`

error: redundant closure --> src/py_module.rs:106:22 | 106 | .map_err(|e| Into::<Ka3005pError>::into(e))?) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:77:51 | 77 | inner: find_serial_port().map_err(|e| Into::<Ka3005pError>::into(e))?, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:74:51 | 74 | inner: Ka3005p::new(port).map_err(|e| Into::<Ka3005pError>::into(e))?, | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:56:22 | 56 | .map_err(|e| Into::<Ka3005pError>::into(e))?) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure

error: redundant closure --> src/py_module.rs:45:22 | 45 | .map_err(|e| Into::<Ka3005pError>::into(e))?) | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace the closure with the function itself: `Into::<Ka3005pError>::into` | = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_closure note: the lint level is defined here --> src/lib.rs:30:9 | 30 | #![deny(warnings)] | ^^^^^^^^ = note: `#[deny(clippy::redundant_closure)]` implied by `#[deny(warnings)]`

Clippy had exited with the 101 exit code

The process '/home/runner/.cargo/bin/cargo' failed with exit code 101

The job was canceled because "x86_64-unknown-linux-musl" failed.

The operation was canceled.

The job was canceled because "x86_64-unknown-linux-musl" failed.

The operation was canceled.

The job was canceled because "x86_64-unknown-linux-musl" failed.

The operation was canceled.

The job was canceled because "x86_64-unknown-linux-musl" failed.

The operation was canceled.

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions-rs/toolchain@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.

The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/