v2.2

• Fixes to CLI (and make it so it only reads non-default parameters)

Full Changelog: v2.0...v2.2

v2.1.1-dev

Minor fixes to plot_cross_section

Full Changelog: v2.1-dev...v2.1.1-dev

v2.1-dev

Updates from 2.0:

• Cross section creation supported with HVSRBatch or list of HVSRData (or dir with .hvsr files) (sprit.plot_cross_section)
• Table report specifically for batch outputs that mirrors inputs but with results
• Calibration module working with updates HVSRData objects
• Add update_elevation function to update all attributes associated with elevation
• Add/move plot_depth_curve to sprit_plot module
• fix to _init_peaks() (part of sprit.check_peaks()) so that small peaks are initialized
• Various minor fixes to batch runs

Full Changelog: v2.0...v2.1-dev

v2.0

Major updates:

• The generate_ppsds() function updated to generate_psds() function (older retained for compatibility)
• New noise removal method (moving standard deviation / total standard deviation)
• Raw fft now supported (no instrument response needed) and used by default
  • Obspy PPSD calculates still supported using the osbpy_ppsds=True in the generate_psds() function
• FIXED: The processing_parameters attribute (dict) was overwriting generate_psds() during process_hvsr and not recording process_hvsr (fixed)
• Changed name of detrend_order to detrend_options for more flexibility (fetch_data())
• Added filter_type and filter_options parameters to fetch_data() (uses obspy.Stream.filter())

Minor udpates:

• Changes to verbose outputs (esp. of remove_noise())
• Updated documentation

What's Changed

• Raw_fft by @RJbalikian in #44

Full Changelog: v1.4.3...v2.0

v1.4.3

• Update to html/pdf reports (include hvsr_id)
• HTML/PDF reports now work on linux and windows

Full Changelog: v1.4.2...v1.4.3

v1.4.2

Minor documentation updates

Full Changelog: v1.4.1...v1.4.2

v1.4.1

Minor documentation issues

Full Changelog: v1.4...v1.4.1

v1.4

Changes since v1.3.1:

• MAJOR: "id_prefix" parameter of input_params() changed to "project"
• Batch Process updates (
  • Fixing non-working processes after previous updates)
  • Restructuring to simply re-run sprit.run() after batch detection (minus input_params and fetch_data)
• PDF and HTML reports can both now be generated "on-the-fly" without stopping further (e.g., batch) processing

Full Changelog: v1.3.1...v1.4

v1.3.1

Documentation was not being built correctly due to nonsense errors from sphinx associated with sprit_streamlit_ui.py.

Fixed this so documentation should work (more) seemlessly now

Full Changelog: v1.3...v1.3.1

v1.3

The following major changes were made
Algorithm updates (not-backwards compatible):

• The "input_data" parameter of sprit.input_parameters() was changed from "datapath"
• The "data_export_path parameter of sprit.fetch_data() was changed from "trim_dir"
• The "horizontal_method" parameter of sprit.process_hvsr() was changed from "method"
• A new input_parameters() parameter was added: 'id_prefix'
  • Used for the creation of a unique HVSR_ID attribute (usually, id_prefix is county or project)
• HTML and PDF reports now supported (PDF is now default report that is viewed after processing)
• Diffuse Field Assumption method for combining horizontal components is now fully working/supported
  • This can be used with horizontal_method=1 or horizontal_method='dfa' as a parameter in sprit.process_hvsr()
• Single azimuth designation supported
  • This can be specified using horizontal_method=8 in sprit.process_hvsr()
• Additional dependencies: xhtml2pdf for creating pdf reports
  • Optional dependency: kaleido (for creating html/pdf reports with plotly as the plot engine)
• Noise removal updates:
  • New parameter (and method) processing_window allows specifying exact windows to remove by time
  • Any non-default parameter that is entered triggers the method that parameter is associated with to be used

Other major updates:

• Built-in Tromino instrument response data matches with known response data
• Added legend to component subplot of HV_Plot (sprit.plot_hvsr())
• The sprit.export_report() function has much more functionality
  • Specifying specific files/folders for specific reports
  • Print_Report can now be exported to a .txt file
  • Additional functionality for the new HTML/PDF reports
  • Filenames now reflect hvsr_id (which includes start time, date, and station/partition) and site
• Azimuths will automatically be converted to a positive value between 0-180 degrees
  • If multiple azimuth is used, the 0-180 is reflected onto 180-360 to save computational time

Minor changes:

• Cleanup of package files
• Various improvements to various plots
  • General improvements to plotly functionality (catching up with matplotlib improvements)
  • E.g., 'fr' in plot_type now shows which frequencies are being used to limit peak searching
• What is always printed to terminal (and what is printed via verbose=True)

See full changelog below:
Full Changelog from previous pre-release: v1.2-dev...v1.3
Full Changelog from previous full release: v1.1.1...v1.3