Releases: Reiten966/Polyformer
V1.8
What's Changed
- Split Ring Planetary Gearbox by @The-Rational-Pi in #35
- Fix output gears and print orientation by @The-Rational-Pi in #36
- Added mirrored fan by @The-Rational-Pi in #37
- Update Input Sun 16T.stl by @The-Rational-Pi in #38
- Reoriented new/updated parts by @The-Rational-Pi in #39
- Split ring gearbox now official by @The-Rational-Pi in #41
New Contributors
- @The-Rational-Pi made their first contribution in #35
Full Changelog: V1.7...V1.8
Contributors
Assets 2
Andromeda V1.7
What's Changed
- DaniGT mods by @DanielGtellols in #30
- Create mod.md by @DanielGtellols in #29
- Added a display mount for no-panels PF by @tikitock in #31
- Updated flashing guide by @alextrical in #32
- Uploaded EBB 42/36 Mounts by @madshammy in #33
- Upload Screen Mount Mod by @Madmatt22790 in #34
New Contributors
- @DanielGtellols made their first contribution in #30
- @tikitock made their first contribution in #31
- @madshammy made their first contribution in #33
- @Madmatt22790 made their first contribution in #34
Full Changelog: V1.6...V1.7
Contributors
Assets 2
Andromeda V1.6
Full Changelog: V1.5...V1.6
Andromeda V1.5
What's Changed
- Tidied up folder and added documentation for upload by @alextrical in #20
- Updated firmware with defaults as tempory EEPROM fix by @alextrical in #21
- Updated firmware with bug fix for EBB42 v1.2 by @alextrical in #22
- Alexware Firmware Bugfix by @alextrical in #23
- Alexware Firmware EEPROM Fix by @alextrical in #24
- Alexware Firmware upload bugfix by @alextrical in #25
- added images of pieces by @SasoriOlkof in #26
- Updated defaults to be more relevant by @alextrical in #27
New Contributors
- @SasoriOlkof made their first contribution in #26
Full Changelog: V1.4...V1.5
Contributors
Assets 2
Andromeda V1.4
What's Changed
- helpful hints added to Alextrical's 608 Polycutter readme by @GreenEllipsis in #19
- Reworked bottle cutter, and solved the ribbon curling prior to entry issue.
New Contributors
- @GreenEllipsis made their first contribution in #19
Full Changelog: V1.3...V1.4
Contributors
Assets 2
Andromeda V1.3
What's Changed
- Added initial public release of Firmware by @alextrical in #17
- Added compiled firmware for EBB42 & 36 by @alextrical in #18
Full Changelog: V1.2...V1.3
Contributors
Assets 2
Andromeda V1.2
What's Changed
- Change screw size to match BOM by @lhong820 in #14
- Turning Key Handle by @Daitaro302 in #15
New Contributors
- @Daitaro302 made their first contribution in #15
Full Changelog: V1.0...V1.2
Contributors
Assets 2
Andromeda V1.1
Contributors
Assets 2
Andromeda V1.0
The long-awaited Andromeda release is here.
Polyformer_Andromeda was brought to you with the support of the open-source community
Special thanks to
Alextrical Dréço Bigzilla
lhong820 Sean9 cn
Neo RedFrox highcastle
Snoopy2000 elias JRT3D
Gearbox Redesign
-
50% increase in torque output
-
Active cooling (17C drop in temperature, 54C equilibrium at room temperature)
-
Modularize the gearbox system
-
Decouple shaft knob
-
Standardize to 608 bearings from 695 & 6900
-
Slicing Seam compensation
-
Hub temperature monitoring
Arm Connector Redesign
-
Reinforce arm connector
-
Change to 16 bolts fastening
-
Fully extend the connector, eliminating weak points
Melt Zone Redesign
-
Redesigned fan duct and hotend mounting geometry
-
Replace M3x60mm bolts with more sourceable M3x30mm bolts
-
Modularize hotend mounting wings
-
Modularize ribbon guidler
-
Add fan duct mounting points
Ribbon Cartridge Redesign
-
Change to enclosed cartridge for ribbon storage
-
Add geared key to speed up the winding process
-
Magnetically attach the cartridge to the mount
-
Add storage location for the geared key
PolyCutter Lite
-
Increase overall size, strengthen the structural rigidity
-
Optimize ergonomics
-
Add an adaptive and tool-free cap for the rod
-
Increase max supported bottle size to 105mm
-
Add bearing sharpening jig
-
Change to using all M3x12mm
-
Modularize every single part
-
Add wash to reduce wear on the sliding gauge
-
Overall cutting performance optimization
The First public version
V1.0.0 more bearing overlap, detail refinement, and fastening the cutter wit…