chore(deps): update dependency esbuild to v0.17.5

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
esbuild	0.15.11 -> 0.17.5

---

Release Notes

evanw/esbuild

v0.17.5

Compare Source

• Parse const type parameters from TypeScript 5.0

  The TypeScript 5.0 beta announcement adds const type parameters to the language. You can now add the const modifier on a type parameter of a function, method, or class like this:

  type HasNames = { names: readonly string[] };
  const getNamesExactly = <const T extends HasNames>(arg: T): T["names"] => arg.names;
  const names = getNamesExactly({ names: ["Alice", "Bob", "Eve"] });

  The type of names in the above example is readonly ["Alice", "Bob", "Eve"]. Marking the type parameter as const behaves as if you had written as const at every use instead. The above code is equivalent to the following TypeScript, which was the only option before TypeScript 5.0:

  type HasNames = { names: readonly string[] };
  const getNamesExactly = <T extends HasNames>(arg: T): T["names"] => arg.names;
  const names = getNamesExactly({ names: ["Alice", "Bob", "Eve"] } as const);

  You can read the announcement for more information.

• Make parsing generic async arrow functions more strict in .tsx files

  Previously esbuild's TypeScript parser incorrectly accepted the following code as valid:

  let fn = async <T> () => {};

  The official TypeScript parser rejects this code because it thinks it's the identifier async followed by a JSX element starting with <T>. So with this release, esbuild will now reject this syntax in .tsx files too. You'll now have to add a comma after the type parameter to get generic arrow functions like this to parse in .tsx files:

  let fn = async <T,> () => {};

• Allow the in and out type parameter modifiers on class expressions

  TypeScript 4.7 added the in and out modifiers on the type parameters of classes, interfaces, and type aliases. However, while TypeScript supported them on both class expressions and class statements, previously esbuild only supported them on class statements due to an oversight. This release now allows these modifiers on class expressions too:

  declare let Foo: any;
  Foo = class <in T> { };
  Foo = class <out T> { };

• Update enum constant folding for TypeScript 5.0

  TypeScript 5.0 contains an updated definition of what it considers a constant expression:

  An expression is considered a constant expression if it is

  • a number or string literal,
  • a unary +, -, or ~ applied to a numeric constant expression,
  • a binary +, -, *, /, %, **, <<, >>, >>>, |, &, ^ applied to two numeric constant expressions,
  • a binary + applied to two constant expressions whereof at least one is a string,
  • a template expression where each substitution expression is a constant expression,
  • a parenthesized constant expression,
  • a dotted name (e.g. x.y.z) that references a const variable with a constant expression initializer and no type annotation,
  • a dotted name that references an enum member with an enum literal type, or
  • a dotted name indexed by a string literal (e.g. x.y["z"]) that references an enum member with an enum literal type.

  This impacts esbuild's implementation of TypeScript's const enum feature. With this release, esbuild will now attempt to follow these new rules. For example, you can now initialize an enum member with a template literal expression that contains a numeric constant:

  // Original input
  const enum Example {
    COUNT = 100,
    ERROR = `Expected ${COUNT} items`,
  }
  console.log(
    Example.COUNT,
    Example.ERROR,
  )
  
  // Old output (with --tree-shaking=true)
  var Example = /* @​__PURE__ */ ((Example2) => {
    Example2[Example2["COUNT"] = 100] = "COUNT";
    Example2[Example2["ERROR"] = `Expected ${100 /* COUNT */} items`] = "ERROR";
    return Example2;
  })(Example || {});
  console.log(
    100 /* COUNT */,
    Example.ERROR
  );
  
  // New output (with --tree-shaking=true)
  console.log(
    100 /* COUNT */,
    "Expected 100 items" /* ERROR */
  );

  These rules are not followed exactly due to esbuild's limitations. The rule about dotted references to const variables is not followed both because esbuild's enum processing is done in an isolated module setting and because doing so would potentially require esbuild to use a type system, which it doesn't have. For example:

  // The TypeScript compiler inlines this but esbuild doesn't:
  declare const x = 'foo'
  const enum Foo { X = x }
  console.log(Foo.X)

  Also, the rule that requires converting numbers to a string currently only followed for 32-bit signed integers and non-finite numbers. This is done to avoid accidentally introducing a bug if esbuild's number-to-string operation doesn't exactly match the behavior of a real JavaScript VM. Currently esbuild's number-to-string constant folding is conservative for safety.

• Forbid definite assignment assertion operators on class methods

  In TypeScript, class methods can use the ? optional property operator but not the ! definite assignment assertion operator (while class fields can use both):

  class Foo {
    // These are valid TypeScript
    a?
    b!
    x?() {}
  
    // This is invalid TypeScript
    y!() {}
  }

  Previously esbuild incorrectly allowed the definite assignment assertion operator with class methods. This will no longer be allowed starting with this release.

v0.17.4

Compare Source

• Implement HTTP HEAD requests in serve mode (#​2851)

  Previously esbuild's serve mode only responded to HTTP GET requests. With this release, esbuild's serve mode will also respond to HTTP HEAD requests, which are just like HTTP GET requests except that the body of the response is omitted.

• Permit top-level await in dead code branches (#​2853)

  Adding top-level await to a file has a few consequences with esbuild:

  1. It causes esbuild to assume that the input module format is ESM, since top-level await is only syntactically valid in ESM. That prevents you from using module and exports for exports and also enables strict mode, which disables certain syntax and changes how function hoisting works (among other things).
  2. This will cause esbuild to fail the build if either top-level await isn't supported by your language target (e.g. it's not supported in ES2021) or if top-level await isn't supported by the chosen output format (e.g. it's not supported with CommonJS).
  3. Doing this will prevent you from using require() on this file or on any file that imports this file (even indirectly), since the require() function doesn't return a promise and so can't represent top-level await.

  This release relaxes these rules slightly: rules 2 and 3 will now no longer apply when esbuild has identified the code branch as dead code, such as when it's behind an if (false) check. This should make it possible to use esbuild to convert code into different output formats that only uses top-level await conditionally. This release does not relax rule 1. Top-level await will still cause esbuild to unconditionally consider the input module format to be ESM, even when the top-level await is in a dead code branch. This is necessary because whether the input format is ESM or not affects the whole file, not just the dead code branch.

• Fix entry points where the entire file name is the extension (#​2861)

  Previously if you passed esbuild an entry point where the file extension is the entire file name, esbuild would use the parent directory name to derive the name of the output file. For example, if you passed esbuild a file ./src/.ts then the output name would be src.js. This bug happened because esbuild first strips the file extension to get ./src/ and then joins the path with the working directory to get the absolute path (e.g. join("/working/dir", "./src/") gives /working/dir/src). However, the join operation also canonicalizes the path which strips the trailing /. Later esbuild uses the "base name" operation to extract the name of the output file. Since there is no trailing /, esbuild returns "src" as the base name instead of "", which causes esbuild to incorrectly include the directory name in the output file name. This release fixes this bug by deferring the stripping of the file extension until after all path manipulations have been completed. So now the file ./src/.ts will generate an output file named .js.

• Support replacing property access expressions with inject

  At a high level, this change means the inject feature can now replace all of the same kinds of names as the define feature. So inject is basically now a more powerful version of define, instead of previously only being able to do some of the things that define could do.

  Soem background is necessary to understand this change if you aren't already familiar with the inject feature. The inject feature lets you replace references to global variable with a shim. It works like this:

  1. Put the shim in its own file
  2. Export the shim as the name of the global variable you intend to replace
  3. Pass the file to esbuild using the inject feature

  For example, if you inject the following file using --inject:./injected.js:

  // injected.js
  let processShim = { cwd: () => '/' }
  export { processShim as process }

  Then esbuild will replace all references to process with the processShim variable, which will cause process.cwd() to return '/'. This feature is sort of abusing the ESM export alias syntax to specify the mapping of global variables to shims. But esbuild works this way because using this syntax for that purpose is convenient and terse.

  However, if you wanted to replace a property access expression, the process was more complicated and not as nice. You would have to:

  1. Put the shim in its own file
  2. Export the shim as some random name
  3. Pass the file to esbuild using the inject feature
  4. Use esbuild's define feature to map the property access expression to the random name you made in step 2

  For example, if you inject the following file using --inject:./injected2.js --define:process.cwd=someRandomName:

  // injected2.js
  let cwdShim = () => '/'
  export { cwdShim as someRandomName }

  Then esbuild will replace all references to process.cwd with the cwdShim variable, which will also cause process.cwd() to return '/' (but which this time will not mess with other references to process, which might be desirable).

  With this release, using the inject feature to replace a property access expression is now as simple as using it to replace an identifier. You can now use JavaScript's "arbitrary module namespace identifier names" feature to specify the property access expression directly using a string literal. For example, if you inject the following file using --inject:./injected3.js:

  // injected3.js
  let cwdShim = () => '/'
  export { cwdShim as 'process.cwd' }

  Then esbuild will now replace all references to process.cwd with the cwdShim variable, which will also cause process.cwd() to return '/' (but which will also not mess with other references to process).

  In addition to inserting a shim for a global variable that doesn't exist, another use case is replacing references to static methods on global objects with cached versions to both minify them better and to make access to them potentially faster. For example:

  // Injected file
  let cachedMin = Math.min
  let cachedMax = Math.max
  export {
    cachedMin as 'Math.min',
    cachedMax as 'Math.max',
  }
  
  // Original input
  function clampRGB(r, g, b) {
    return {
      r: Math.max(0, Math.min(1, r)),
      g: Math.max(0, Math.min(1, g)),
      b: Math.max(0, Math.min(1, b)),
    }
  }
  
  // Old output (with --minify)
  function clampRGB(a,t,m){return{r:Math.max(0,Math.min(1,a)),g:Math.max(0,Math.min(1,t)),b:Math.max(0,Math.min(1,m))}}
  
  // New output (with --minify)
  var a=Math.min,t=Math.max;function clampRGB(h,M,m){return{r:t(0,a(1,h)),g:t(0,a(1,M)),b:t(0,a(1,m))}}

v0.17.3

Compare Source

• Fix incorrect CSS minification for certain rules (#​2838)

  Certain rules such as @media could previously be minified incorrectly. Due to a typo in the duplicate rule checker, two known @-rules that share the same hash code were incorrectly considered to be equal. This problem was made worse by the rule hashing code considering two unknown declarations (such as CSS variables) to have the same hash code, which also isn't optimal from a performance perspective. Both of these issues have been fixed:

  /* Original input */
  @​media (prefers-color-scheme: dark) { body { --VAR-1: #​000; } }
  @​media (prefers-color-scheme: dark) { body { --VAR-2: #​000; } }
  
  /* Old output (with --minify) */
  @​media (prefers-color-scheme: dark){body{--VAR-2: #​000}}
  
  /* New output (with --minify) */
  @​media (prefers-color-scheme: dark){body{--VAR-1: #​000}}@​media (prefers-color-scheme: dark){body{--VAR-2: #​000}}

v0.17.2

Compare Source

• Add onDispose to the plugin API (#​2140, #​2205)

  If your plugin wants to perform some cleanup after it's no longer going to be used, you can now use the onDispose API to register a callback for cleanup-related tasks. For example, if a plugin starts a long-running child process then it may want to terminate that process when the plugin is discarded. Previously there was no way to do this. Here's an example:

  let examplePlugin = {
    name: 'example',
    setup(build) {
      build.onDispose(() => {
        console.log('This plugin is no longer used')
      })
    },
  }

  These onDispose callbacks will be called after every build() call regardless of whether the build failed or not as well as after the first dispose() call on a given build context.

v0.17.1

Compare Source

• Make it possible to cancel a build (#​2725)

  The context object introduced in version 0.17.0 has a new cancel() method. You can use it to cancel a long-running build so that you can start a new one without needing to wait for the previous one to finish. When this happens, the previous build should always have at least one error and have no output files (i.e. it will be a failed build).

  Using it might look something like this:

  • JS:

    let ctx = await esbuild.context({
      // ...
    })
    
    let rebuildWithTimeLimit = timeLimit => {
      let timeout = setTimeout(() => ctx.cancel(), timeLimit)
      return ctx.rebuild().finally(() => clearTimeout(timeout))
    }
    
    let build = await rebuildWithTimeLimit(500)

  • Go:

    ctx, err := api.Context(api.BuildOptions{
      // ...
    })
    if err != nil {
      return
    }
    
    rebuildWithTimeLimit := func(timeLimit time.Duration) api.BuildResult {
      t := time.NewTimer(timeLimit)
      go func() {
        <-t.C
        ctx.Cancel()
      }()
      result := ctx.Rebuild()
      t.Stop()
      return result
    }
    
    build := rebuildWithTimeLimit(500 * time.Millisecond)

  This API is a quick implementation and isn't maximally efficient, so the build may continue to do some work for a little bit before stopping. For example, I have added stop points between each top-level phase of the bundler and in the main module graph traversal loop, but I haven't added fine-grained stop points within the internals of the linker. How quickly esbuild stops can be improved in future releases. This means you'll want to wait for cancel() and/or the previous rebuild() to finish (i.e. await the returned promise in JavaScript) before starting a new build, otherwise rebuild() will give you the just-canceled build that still hasn't ended yet. Note that onEnd callbacks will still be run regardless of whether or not the build was canceled.

• Fix server-sent events without servedir (#​2827)

  The server-sent events for live reload were incorrectly using servedir to calculate the path to modified output files. This means events couldn't be sent when servedir wasn't specified. This release uses the internal output directory (which is always present) instead of servedir (which might be omitted), so live reload should now work when servedir is not specified.

• Custom entry point output paths now work with the copy loader (#​2828)

  Entry points can optionally provide custom output paths to change the path of the generated output file. For example, esbuild foo=abc.js bar=xyz.js --outdir=out generates the files out/foo.js and out/bar.js. However, this previously didn't work when using the copy loader due to an oversight. This bug has been fixed. For example, you can now do esbuild foo=abc.html bar=xyz.html --outdir=out --loader:.html=copy to generate the files out/foo.html and out/bar.html.

• The JS API can now take an array of objects (#​2828)

  Previously it was not possible to specify two entry points with the same custom output path using the JS API, although it was possible to do this with the Go API and the CLI. This will not cause a collision if both entry points use different extensions (e.g. if one uses .js and the other uses .css). You can now pass the JS API an array of objects to work around this API limitation:

  // The previous API didn't let you specify duplicate output paths
  let result = await esbuild.build({
    entryPoints: {
      // This object literal contains a duplicate key, so one is ignored
      'dist': 'foo.js',
      'dist': 'bar.css',
    },
  })
  
  // You can now specify duplicate output paths as an array of objects
  let result = await esbuild.build({
    entryPoints: [
      { in: 'foo.js', out: 'dist' },
      { in: 'bar.css', out: 'dist' },
    ],
  })

v0.17.0

Compare Source

This release deliberately contains backwards-incompatible changes. To avoid automatically picking up releases like this, you should either be pinning the exact version of esbuild in your package.json file (recommended) or be using a version range syntax that only accepts patch upgrades such as ^0.16.0 or ~0.16.0. See npm's documentation about semver for more information.

At a high level, the breaking changes in this release fix some long-standing issues with the design of esbuild's incremental, watch, and serve APIs. This release also introduces some exciting new features such as live reloading. In detail:

• Move everything related to incremental builds to a new context API (#​1037, #​1606, #​2280, #​2418)

  This change removes the incremental and watch options as well as the serve() method, and introduces a new context() method. The context method takes the same arguments as the build() method but only validates its arguments and does not do an initial build. Instead, builds can be triggered using the rebuild(), watch(), and serve() methods on the returned context object. The new context API looks like this:

  // Create a context for incremental builds
  const context = await esbuild.context({
    entryPoints: ['app.ts'],
    bundle: true,
  })
  
  // Manually do an incremental build
  const result = await context.rebuild()
  
  // Enable watch mode
  await context.watch()
  
  // Enable serve mode
  await context.serve()
  
  // Dispose of the context
  context.dispose()

  The switch to the context API solves a major issue with the previous API which is that if the initial build fails, a promise is thrown in JavaScript which prevents you from accessing the returned result object. That prevented you from setting up long-running operations such as watch mode when the initial build contained errors. It also makes tearing down incremental builds simpler as there is now a single way to do it instead of three separate ways.

  In addition, this release also makes some subtle changes to how incremental builds work. Previously every call to rebuild() started a new build. If you weren't careful, then builds could actually overlap. This doesn't cause any problems with esbuild itself, but could potentially cause problems with plugins (esbuild doesn't even give you a way to identify which overlapping build a given plugin callback is running on). Overlapping builds also arguably aren't useful, or at least aren't useful enough to justify the confusion and complexity that they bring. With this release, there is now only ever a single active build per context. Calling rebuild() before the previous rebuild has finished now "merges" with the existing rebuild instead of starting a new build.

• Allow using watch and serve together (#​805, #​1650, #​2576)

  Previously it was not possible to use watch mode and serve mode together. The rationale was that watch mode is one way of automatically rebuilding your project and serve mode is another (since serve mode automatically rebuilds on every request). However, people want to combine these two features to make "live reloading" where the browser automatically reloads the page when files are changed on the file system.

  This release now allows you to use these two features together. You can only call the watch() and serve() APIs once each per context, but if you call them together on the same context then esbuild will automatically rebuild both when files on the file system are changed and when the server serves a request.

• Support "live reloading" through server-sent events (#​802)

  Server-sent events are a simple way to pass one-directional messages asynchronously from the server to the client. Serve mode now provides a /esbuild endpoint with an change event that triggers every time esbuild's output changes. So you can now implement simple "live reloading" (i.e. reloading the page when a file is edited and saved) like this:

  new EventSource('/esbuild').addEventListener('change', () => location.reload())

  The event payload is a JSON object with the following shape:

  interface ChangeEvent {
    added: string[]
    removed: string[]
    updated: string[]
  }

  This JSON should also enable more complex live reloading scenarios. For example, the following code hot-swaps changed CSS <link> tags in place without reloading the page (but still reloads when there are other types of changes):

  new EventSource('/esbuild').addEventListener('change', e => {
    const { added, removed, updated } = JSON.parse(e.data)
    if (!added.length && !removed.length && updated.length === 1) {
      for (const link of document.getElementsByTagName("link")) {
        const url = new URL(link.href)
        if (url.host === location.host && url.pathname === updated[0]) {
          const next = link.cloneNode()
          next.href = updated[0] + '?' + Math.random().toString(36).slice(2)
          next.onload = () => link.remove()
          link.parentNode.insertBefore(next, link.nextSibling)
          return
        }
      }
    }
    location.reload()
  })

  Implementing live reloading like this has a few known caveats:

  • These events only trigger when esbuild's output changes. They do not trigger when files unrelated to the build being watched are changed. If your HTML file references other files that esbuild doesn't know about and those files are changed, you can either manually reload the page or you can implement your own live reloading infrastructure instead of using esbuild's built-in behavior.

  • The EventSource API is supposed to automatically reconnect for you. However, there's a bug in Firefox that breaks this if the server is ever temporarily unreachable: https://bugzilla.mozilla.org/show_bug.cgi?id=1809332. Workarounds are to use any other browser, to manually reload the page if this happens, or to write more complicated code that manually closes and re-creates the EventSource object if there is a connection error. I'm hopeful that this bug will be fixed.

  • Browser vendors have decided to not implement HTTP/2 without TLS. This means that each /esbuild event source will take up one of your precious 6 simultaneous per-domain HTTP/1.1 connections. So if you open more than six HTTP tabs that use this live-reloading technique, you will be unable to use live reloading in some of those tabs (and other things will likely also break). The workaround is to enable HTTPS, which is now possible to do in esbuild itself (see below).

• Add built-in support for HTTPS (#​2169)

  You can now tell esbuild's built-in development server to use HTTPS instead of HTTP. This is sometimes necessary because browser vendors have started making modern web features unavailable to HTTP websites. Previously you had to put a proxy in front of esbuild to enable HTTPS since esbuild's development server only supported HTTP. But with this release, you can now enable HTTPS with esbuild without an additional proxy.

  To enable HTTPS with esbuild:

  1. Generate a self-signed certificate. There are many ways to do this. Here's one way, assuming you have openssl installed:

     openssl req -x509 -newkey rsa:4096 -keyout key.pem -out cert.pem -days 9999 -nodes -subj /CN=127.0.0.1
     

  2. Add --keyfile=key.pem and --certfile=cert.pem to your esbuild development server command

  3. Click past the scary warning in your browser when you load your page

  If you have more complex needs than this, you can still put a proxy in front of esbuild and use that for HTTPS instead. Note that if you see the message "Client sent an HTTP request to an HTTPS server" when you load your page, then you are using the incorrect protocol. Replace http:// with https:// in your browser's URL bar.

  Keep in mind that esbuild's HTTPS support has nothing to do with security. The only reason esbuild now supports HTTPS is because browsers have made it impossible to do local development with certain modern web features without jumping through these extra hoops. Please do not use esbuild's development server for anything that needs to be secure. It's only intended for local development and no considerations have been made for production environments whatsoever.

• Better support copying index.html into the output directory (#​621, #​1771)

  Right now esbuild only supports JavaScript and CSS as first-class content types. Previously this meant that if you were building a website with a HTML file, a JavaScript file, and a CSS file, you could use esbuild to build the JavaScript file and the CSS file into the output directory but not to copy the HTML file into the output directory. You needed a separate cp command for that.

  Or so I thought. It turns out that the copy loader added in version 0.14.44 of esbuild is sufficient to have esbuild copy the HTML file into the output directory as well. You can add something like index.html --loader:.html=copy and esbuild will copy index.html into the output directory for you. The benefits of this are a) you don't need a separate cp command and b) the index.html file will automatically be re-copied when esbuild is in watch mode and the contents of index.html are edited. This also goes for other non-HTML file types that you might want to copy.

  This pretty much already worked. The one thing that didn't work was that esbuild's built-in development server previously only supported implicitly loading index.html (e.g. loading /about/index.html when you visit /about/) when index.html existed on the file system. Previously esbuild didn't support implicitly loading index.html if it was a build result. That bug has been fixed with this release so it should now be practical to use the copy loader to do this.

• Fix onEnd not being called in serve mode (#​1384)

  Previous releases had a bug where plugin onEnd callbacks weren't called when using the top-level serve() API. This API no longer exists and the internals have been reimplemented such that onEnd callbacks should now always be called at the end of every build.

• Incremental builds now write out build results differently (#​2104)

  Previously build results were always written out after every build. However, this could cause the output directory to fill up with files from old builds if code splitting was enabled, since the file names for code splitting chunks contain content hashes and old files were not deleted.

  With this release, incremental builds in esbuild will now delete old output files from previous builds that are no longer relevant. Subsequent incremental builds will also no longer overwrite output files whose contents haven't changed since the previous incremental build.

• The onRebuild watch mode callback was removed (#​980, #​2499)

  Previously watch mode accepted an onRebuild callback which was called whenever watch mode rebuilt something. This was not great in practice because if you are running code after a build, you likely want that code to run after every build, not just after the second and subsequent builds. This release removes option to provide an onRebuild callback. You can create a plugin with an onEnd callback instead. The onEnd plugin API already exists, and is a way to run some code after every build.

• You can now return errors from onEnd (#​2625)

  It's now possible to add additional build errors and/or warnings to the current build from within your onEnd callback by returning them in an array. This is identical to how the onStart callback already works. The evaluation of onEnd callbacks have been moved around a bit internally to make this possible.

  Note that the build will only fail (i.e. reject the promise) if the additional errors are returned from onEnd. Adding additional errors to the result object that's passed to onEnd won't affect esbuild's behavior at all.

• Print URLs and ports from the Go and JS APIs (#​2393)

  Previously esbuild's CLI printed out something like this when serve mode is active:

   > Local:   http://127.0.0.1:8000/
   > Network: http://192.168.0.1:8000/
  

  The CLI still does this, but now the JS and Go serve mode APIs will do this too. This only happens when the log level is set to verbose, debug, or info but not when it's set to warning, error, or silent.

Upgrade guide for existing code:

• Rebuild (a.k.a. incremental build):

  Before:

  const result = await esbuild.build({ ...buildOptions, incremental: true });
  builds.push(result);
  for (let i = 0; i < 4; i++) builds.push(await result.rebuild());
  await result.rebuild.dispose(); // To free resources

  After:

  const ctx = await esbuild.context(buildOptions);
  for (let i = 0; i < 5; i++) builds.push(await ctx.rebuild());
  await ctx.dispose(); // To free resources

  Previously the first build was done differently than subsequent builds. Now both the first build and subsequent builds are done using the same API.

• Serve:

  Before:

  const serveResult = await esbuild.serve(serveOptions, buildOptions);
  ...
  serveResult.stop(); await serveResult.wait; // To free resources

  After:

  const ctx = await esbuild.context(buildOptions);
  const serveResult = await ctx.serve(serveOptions);
  ...
  await ctx.dispose(); // To free resources

• Watch:

  Before:

  const result = await esbuild.build({ ...buildOptions, watch: true });
  ...
  result.stop(); // To free resources

  After:

  const ctx = await esbuild.context(buildOptions);
  await ctx.watch();
  ...
  await ctx.dispose(); // To free resources

• Watch with onRebuild:

  Before:

  const onRebuild = (error, result) => {
    if (error) console.log('subsequent build:', error);
    else console.log('subsequent build:', result);
  };
  try {
    const result = await esbuild.build({ ...buildOptions, watch: { onRebuild } });
    console.log('first build:', result);
    ...
    result.stop(); // To free resources
  } catch (error) {
    console.log('first build:', error);
  }

  After:

  const plugins = [{
    name: 'my-plugin',
    setup(build) {
      let count = 0;
      build.onEnd(result => {
        if (count++ === 0) console.log('first build:', result);
        else console.log('subsequent build:', result);
      });
    },
  }];
  const ctx = await esbuild.context({ ...buildOptions, plugins });
  await ctx.watch();
  ...
  await ctx.dispose(); // To free resources

  The onRebuild function has now been removed. The replacement is to make a plugin with an onEnd callback.

  Previously onRebuild did not fire for the first build (only for subsequent builds). This was usually problematic, so using onEnd instead of onRebuild is likely less error-prone. But if you need to emulate the old behavior of onRebuild that ignores the first build, then you'll need to manually count and ignore the first build in your plugin (as demonstrated above).

Notice how all of these API calls are now done off the new context object. You should now be able to use all three kinds of incremental builds (rebuild, serve, and watch) together on the same context object. Also notice how calling dispose on the context is now the common way to discard the context and free resources in all of these situations.

v0.16.17

Compare Source

• Fix additional comment-related regressions (#​2814)

  This release fixes more edge cases where the new comment preservation behavior that was added in 0.16.14 could introduce syntax errors. Specifically:

  x = () => (/* comment */ {})
  for ((/* comment */ let).x of y) ;
  function *f() { yield (/* comment */class {}) }

  These cases caused esbuild to generate code with a syntax error in version 0.16.14 or above. These bugs have now been fixed.

v0.16.16

Compare Source

• Fix a regression caused by comment preservation (#​2805)

  The new comment preservation behavior that was added in 0.16.14 introduced a regression where comments in certain locations could cause esbuild to omit certain necessary parentheses in the output. The outermost parentheses were incorrectly removed for the following syntax forms, which then introduced syntax errors:

  (/* comment */ { x: 0 }).x;
  (/* comment */ function () { })();
  (/* comment */ class { }).prototype;

  This regression has been fixed.

v0.16.15

Compare Source

• Add format to input files in the JSON metafile data

  When --metafile is enabled, input files may now have an additional format field that indicates the export format used by this file. When present, the value will either be cjs for CommonJS-style exports or esm for ESM-style exports. This can be useful in bundle analysis.

  For example, esbuild's new Bundle Size Analyzer now uses this information to visualize whether ESM or CommonJS was used for each directory and file of source code (click on the CJS/ESM bar at the top).

  This information is helpful when trying to reduce the size of your bundle. Using the ESM variant of a dependency instead of the CommonJS variant always results in a faster and smaller bundle because it omits CommonJS wrappers, and also may result in better tree-shaking as it allows esbuild to perform tree-shaking at the statement level instead of the module level.

• Fix a bundling edge case with dynamic import (#​2793)

  This release fixes a bug where esbuild's bundler could produce incorrect output. The problematic edge case involves the entry point importing itself using a dynamic import() expression in an imported file, like this:

  // src/a.js
  export const A = 42;
  
  // src/b.js
  export const B = async () => (await import(".")).A
  
  // src/index.js
  export * from "./a"
  export * from "./b"

• Remove new type syntax from type declarations in the esbuild package (#​2798)

  Previously you needed to use TypeScript 4.3 or newer when using the esbuild package from TypeScript code due to the use of a getter in an interface in node_modules/esbuild/lib/main.d.ts. This release removes this newer syntax to allow people with versions of TypeScript as far back as TypeScript 3.5 to use this latest version of the esbuild package. Here is change that was made to esbuild's type declarations:

   export interface OutputFile {
     /** "text" as bytes */
     contents: Uint8Array;
     /** "contents" as text (changes automatically with "contents") */
  -  get text(): string;
  +  readonly text: string;
   }

v0.16.14

Compare Source

• Preserve some comments in expressions (#​2721)

  Various tools give semantic meaning to comments embedded inside of expressions. For example, Webpack and Vite have special "magic comments" that can be used to affect code splitting behavior:

  import(/* webpackChunkName: "foo" */ '../foo');
  import(/* @​vite-ignore */ dynamicVar);
  new Worker(/* webpackChunkName: "bar" */ new URL("../bar.ts", import.meta.url));
  new Worker(new URL('./path', import.meta.url), /* @​vite-ignore */ dynamicOptions);

  Since esbuild can be used as a preprocessor for these tools (e.g. to strip TypeScript types), it can be problematic if esbuild doesn't do additional work to try to retain these comments. Previously esbuild special-cased Webpack comments in these specific locations in the AST. But Vite would now like to use similar comments, and likely other tools as well.

  So with this release, esbuild now will attempt to preserve some comments inside of expressions in more situations than before. This behavior is mainly intended to preserve these special "magic comments" that are meant for other tools to consume, although esbuild will no longer only preserve Webpack-specific comments so it should now be tool-agnostic. There is no guarantee that all such comments will be preserved (especially when --minify-syntax is enabled). So this change does not mean that esbuild is now usable as a code formatter. In particular comment preservation is more likely to happen with leading comments than with trailing comments. You should put comments that you want to be preserved before the relevant expression instead of after it. Also note that this change does not retain any more statement-level comments than before (i.e. comments not embedded inside of expressions). Comment preservation is not enabled when --minify-whitespace is enabled (which is automatically enabled when you use --minify).

v0.16.13

Compare Source

• Publish a new bundle visualization tool

  While esbuild provides bundle metadata via the --metafile flag, previously esbuild left analysis of it completely up to third-party tools (well, outside of the rudimentary --analyze flag). However, the esbuild website now has a built-in bundle visualization tool:

  • https://esbuild.github.io/analyze/

  You can pass --metafile to esbuild to output bundle metadata, then upload that JSON file to this tool to visualize your bundle. This is helpful for answering questions such as:

  • Which packages are included in my bundle?
  • How did a specific file get included?
  • How small did a specific file compress to?
  • Was a specific file tree-shaken or not?

  I'm publishing this tool because I think esbuild should provide some answer to "how do I visualize my bundle" without requiring people to reach for third-party tools. At the moment the tool offers two types of visualizations: a radial "sunburst chart" and a linear "flame chart". They serve slightly different but overlapping use cases (e.g. the sunburst chart is more keyboard-accessible while the flame chart is easier with the mouse). This tool may continue to evolve over time.

• Fix --metafile and --mangle-cache with --watch (#​1357)

  The CLI calls the Go API and then also writes out the metafile and/or mangle cache JSON files if those features are enabled. This extra step is necessary because these files are returned by the Go API as in-memory strings. However, this extra step accidentally didn't happen for all builds after the initial build when watch mode was enabled. This behavior used to work but it was broken in version 0.14.18 by the introduction of the mangle cache feature. This release fixes the combination of these features, so the metafile and mangle cache features should now work with watch mode. This behavior was only broken for the CLI, not for the JS or Go APIs.

• Add an original field to the metafile

  The metadata file JSON now has an additional field: each import in an input file now contains the pre-resolved path in the original field in addition to the post-resolved path in the path field. This means it's now possible to run certain additional analysis over your bundle. For example, you should be able to use this to detect when the same package subpath is represented multiple times in the bundle, either because multiple versions of a package were bundled or because a package is experiencing the dual-package hazard.

v0.16.12

Compare Source

• Loader defaults to js for extensionless files (#​2776)

  Certain packages contain files without an extension. For example, the yargs package contains the file yargs/yargs which has no extension. Node, Webpack, and Parcel can all understand code that imports yargs/yargs because they assume that the file is JavaScript. However, esbuild was previously unable to understand this code because it relies on the file extension to tell it how to interpret the file. With this release, esbuild will now assume files without an extension are JavaScript files. This can be customized by setting the loader for "" (the empty string, representing files without an extension) to another loader. For example, if you want files without an extension to be treated as CSS instead, you can do that like this:

  • CLI:

    esbuild --bundle --loader:=css
    

  • JS:

    esbuild.build({
      bundle: true,
      loader: { '': 'css' },
    })

  • Go:

    api.Build(api.BuildOptions{
      Bundle: true,
      Loader: map[string]api.Loader{"": api.LoaderCSS},
    })

  In addition, the "type" field in package.json files now only applies to files with an explicit .js, .jsx, .ts, or .tsx extension. Previously it was incorrectly applied by esbuild to all files that had an extension other than .mjs, .mts, .cjs, or .cts including extensionless files. So for example an extensionless file in a "type": "module" package is now treated as CommonJS instead of ESM.

v0.16.11

Compare Source

• Avoid a syntax error in the presence of direct eval (#​2761)

  The behavior of nested function declarations in JavaScript depends on whether the code is run in strict mode or not. It would be problematic if esbuild preserved nested function declarations in its output because then the behavior would depend on whether the output was run in strict mode or not instead of respecting the strict mode behavior of the original source code. To avoid this, esbuild transforms nested function declarations to preserve the intended behavior of the original source code regardless of whether the output is run in strict mode or not:

  // Original code
  if (true) {
    function foo() {}
    console.log(!!foo)
    foo = null
    console.log(!!foo)
  }
  console.log(!!foo)
  
  // Transformed code
  if (true) {
    let foo2 = function() {
    };
    var foo = foo2;
    console.log(!!foo2);
    foo2 = null;
    console.log(!!foo2);
  }
  console.log(!!foo);

  In the above example, the original code should print true false true because it's not run in strict mode (it doesn't contain "use strict" and is not an ES module). The code that esbuild generates has been transformed such that it prints true false true regardless of whether it's run in strict mode or not.

  However, this transformation is impossible if the code contains direct eval because direct eval "poisons" all containing scopes by preventing anything in those scopes from being renamed. That prevents esbuild from splitting up accesses to foo into two separate variables with different names. Previously esbuild still did this transformation but with two variables both named foo, which is a syntax error. With this release esbuild will now skip doing this transformation when direct eval is present to avoid generating code with a syntax error. This means that the generated code may no longer behave as intended since the behavior depends on the run-time strict mode setting instead of the strict mode setting present in the original source code. To fix this problem, you will need to remove the use of direct eval.

• Fix a bundling scenario involving multiple symlinks (#​2773, #​2774)

  This release contains a fix for a bundling scenario involving an import path where multiple path segments are symlinks. Previously esbuild was unable to resolve certain import paths in this scenario, but these import paths should now work starting with this release. This fix was contributed by @​onebytegone.

v0.16.10

Compare Source

• Change the default "legal comment" behavior again (#​2745)

  The legal comments feature automatically gathers comments containing @license or @preserve and puts the comments somewhere (either in the generated code or in a separate file). This behavior used to be on by default but was disabled by default in version 0.16.0 because automatically inserting comments is potentially confusing and misleading. These comments can appear to be assigning the copyright of your code to another entity. And this behavior can be especially problematic if it happens automatically by default since you may not even be aware of it happening. For example, if you bundle the TypeScript compiler the preserving legal comments means your source code would contain this comment, which appears to be assigning the copyright of all of your code to Microsoft:

  /*! *****************************************************************************
  Copyright (c) Microsoft Corporation. All rights reserved.
  Licensed under the Apache License, Version 2.0 (the "License"); you may not use
  this file except in compliance with the License. You may obtain a copy of the
  License at http://www.apache.org/licenses/LICENSE-2.0
  
  THIS CODE IS PROVIDED ON AN *AS IS* BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
  KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED
  WARRANTIES OR CONDITIONS OF TITLE, FITNESS FOR A PARTICULAR PURPOSE,
  MERCHANTABLITY OR NON-INFRINGEMENT.
  
  See the Apache Version 2.0 License for specific language governing permissions
  and limitations under the License.
  ***************************************************************************** */

  However, people have asked for this feature to be re-enabled by default. To resolve the confusion about what these comments are applying to, esbuild's default behavior will now be to attempt to describe which package the comments are coming from. So while this feature has been re-enabled by default, the output will now look something like this instead:

  /*! Bundled license information:
  
  typescript/lib/typescript.js:
    (*! *****************************************************************************
    Copyright (c) Microsoft Corporation. All rights reserved.
    Licensed under the Apache License, Version 2.0 (the "License"); you may not use
    this file except in compliance with the License. You may obtain a copy of the
    License at http://www.apache.org/licenses/LICENSE-2.0
  
    THIS CODE IS PROVIDED ON AN *AS IS* BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED
    WARRANTIES OR CONDITIONS OF TITLE, FITNESS FOR A PARTICULAR PURPOSE,
    MERCHANTABLITY OR NON-INFRINGEMENT.
  
    See the Apache Version 2.0 License for specific language governing permissions
    and limitations under the License.
    ***************************************************************************** *)
  */

  Note that you can still customize this behavior with the --legal-comments= flag. For example, you can use --legal-comments=none to turn this off, or you can use --legal-comments=linked to put these comments in a separate .LEGAL.txt file instead.

• Enable external legal comments with the transform API (#​2390)

  Previously esbuild's transform API only supported none, inline, or eof legal comments. With this release, external legal comments are now also supported with the transform API. This only applies to the JS and Go APIs, not to the CLI, and looks like this:

  • JS:

    const { code, legalComments } = await esbuild.transform(input, {
      legalComments: 'external',
    })

  • Go:

    result := api.Transform(input, api.TransformOptions{
      LegalComments: api.LegalCommentsEndOfFile,
    })
    code := result.Code
    legalComments := result.LegalComments

• Fix duplicate function declaration edge cases (#​2757)

  The change in the previous release to forbid duplicate function declarations in certain cases accidentally forbid some edge cases that should have been allowed. Specifically duplicate function declarations are forbidden in nested blocks in strict mode and at the top level of modules, but are allowed when they are declared at the top level of function bodies. This release fixes the regression by re-allowing the last case.

• Allow package subpaths with alias (#​2715)

  Previously the names passed to the alias feature had to be the name of a package (with or without a package scope). With this release, you can now also use the alias feature with package subpaths. So for example you can now create an alias that substitutes @org/pkg/lib with something else.

v0.16.9

Compare Source

• Update to Unicode 15.0.0

  The character tables that determine which characters form valid JavaScript identifiers have been updated from Unicode version 14.0.0 to the newly-released Unicode version 15.0.0. I'm not putting an example in the release notes because all of the new characters will likely just show up as little squares since fonts haven't been updated yet. But you can read https://www.unicode.org/versions/Unicode15.0.0/#Summary for more information about the changes.

• Disallow duplicate lexically-declared names in nested blocks and in strict mode

  In strict mode or in a nested block, it's supposed to be a syntax error to declare two symbols with the same name unless all duplicate entries are either function declarations or all var declarations. However, esbuild was overly permissive and allowed this when duplicate entries were either function declarations or var declarations (even if they were mixed). This check has now been made more restrictive to match the JavaScript specification:

  // JavaScript allows this
  var a
  function a() {}
  {
    var b
    var b
    function c() {}
    function c() {}
  }
  
  // JavaScript doesn't allow this
  {
    var d
    function d() {}
  }

• Add a type declaration for the new empty loader (#​2755)

  I forgot to add this in the previous release. It has now been added.

  This fix was contributed by @​fz6m.

• Add support for the v flag in regular expression literals

  People are currently working on adding a v flag to JavaScript regular expresions. You can read more about this flag here: https://v8.dev/features/regexp-v-flag. This release adds support for parsing this flag, so esbuild will now no longer consider regular expression l

---

Configuration

📅 Schedule: Branch creation - "every weekend" in timezone Pacific/Auckland, Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR has been generated by Mend Renovate. View repository job log here.