Twrp 7.1.1

CREDITS

@@ -636,6 +636,7 @@ D: Configure, Menuconfig, xconfig
 
 N: Mauro Carvalho Chehab
 E: m.chehab@samsung.org
+E: mchehab@osg.samsung.com
 E: mchehab@infradead.org
 D: Media subsystem (V4L/DVB) drivers and core
 D: EDAC drivers and EDAC 3.0 core rework

Documentation/ABI/testing/configfs-usb-gadget-loopback

@@ -5,4 +5,4 @@ Description:
 		The attributes:
 
 		qlen		- depth of loopback queue
-		bulk_buflen	- buffer length
+		buflen		- buffer length

Documentation/ABI/testing/configfs-usb-gadget-sourcesink

@@ -9,4 +9,4 @@ Description:
 		isoc_maxpacket	- 0 - 1023 (fs), 0 - 1024 (hs/ss)
 		isoc_mult	- 0..2 (hs/ss only)
 		isoc_maxburst	- 0..15 (ss only)
-		qlen		- buffer length
+		buflen		- buffer length

Documentation/ABI/testing/ima_policy

@@ -20,17 +20,19 @@ Description:
 		action: measure | dont_measure | appraise | dont_appraise | audit
 		condition:= base | lsm  [option]
 			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
-				 [fowner]]
+				[euid=] [fowner=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 			option:	[[appraise_type=]] [permit_directio]
 
 		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
-			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
+			       [[^]MAY_EXEC]
 			fsmagic:= hex value
 			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value
+			euid:= decimal value
 			fowner:=decimal value
 		lsm:  	are LSM specific
 		option:	appraise_type:= [imasig]

Documentation/ABI/testing/sysfs-ata

@@ -90,6 +90,17 @@ gscr
 	130:	SATA_PMP_GSCR_SII_GPIO
 	Only valid if the device is a PM.
 
+trim
+
+	Shows the DSM TRIM mode currently used by the device. Valid
+	values are:
+	unsupported:		Drive does not support DSM TRIM
+	unqueued:		Drive supports unqueued DSM TRIM only
+	queued:			Drive supports queued DSM TRIM
+	forced_unqueued:	Drive's unqueued DSM support is known to be
+				buggy and only unqueued TRIM commands
+				are sent
+
 spdn_cnt
 
 	Number of time libata decided to lower the speed of link due to errors.

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -74,3 +74,41 @@ Date:		March 2014
 Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
 Description:
 		 Controls the memory footprint used by f2fs.
+
+What:		/sys/fs/f2fs/<disk>/trim_sections
+Date:		February 2015
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the trimming rate in batch mode.
+
+What:		/sys/fs/f2fs/<disk>/cp_interval
+Date:		October 2015
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the checkpoint timing.
+
+What:		/sys/fs/f2fs/<disk>/idle_interval
+Date:		January 2016
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the idle timing.
+
+What:		/sys/fs/f2fs/<disk>/ra_nid_pages
+Date:		October 2015
+Contact:	"Chao Yu" <chao2.yu@samsung.com>
+Description:
+		 Controls the count of nid pages to be readaheaded.
+
+What:		/sys/fs/f2fs/<disk>/dirty_nats_ratio
+Date:		January 2016
+Contact:	"Chao Yu" <chao2.yu@samsung.com>
+Description:
+		 Controls dirty nat entries ratio threshold, if current
+		 ratio exceeds configured threshold, checkpoint will
+		 be triggered for flushing dirty nat entries.
+
+What:		/sys/fs/f2fs/<disk>/lifetime_write_kbytes
+Date:		January 2016
+Contact:	"Shuoran Liu" <liushuoran@huawei.com>
+Description:
+		 Shows total written kbytes issued to disk.

Documentation/HOWTO

@@ -218,16 +218,16 @@ The development process
 Linux kernel development process currently consists of a few different
 main kernel "branches" and lots of different subsystem-specific kernel
 branches.  These different branches are:
-  - main 3.x kernel tree
-  - 3.x.y -stable kernel tree
-  - 3.x -git kernel patches
+  - main 4.x kernel tree
+  - 4.x.y -stable kernel tree
+  - 4.x -git kernel patches
   - subsystem specific kernel trees and patches
-  - the 3.x -next kernel tree for integration tests
+  - the 4.x -next kernel tree for integration tests
 
-3.x kernel tree
+4.x kernel tree
 -----------------
-3.x kernels are maintained by Linus Torvalds, and can be found on
-kernel.org in the pub/linux/kernel/v3.x/ directory.  Its development
+4.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v4.x/ directory.  Its development
 process is as follows:
   - As soon as a new kernel is released a two weeks window is open,
     during this period of time maintainers can submit big diffs to
@@ -262,20 +262,20 @@ mailing list about kernel releases:
 	released according to perceived bug status, not according to a
 	preconceived timeline."
 
-3.x.y -stable kernel tree
+4.x.y -stable kernel tree
 ---------------------------
 Kernels with 3-part versions are -stable kernels. They contain
 relatively small and critical fixes for security problems or significant
-regressions discovered in a given 3.x kernel.
+regressions discovered in a given 4.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 3.x.y kernel is available, then the highest numbered 3.x
+If no 4.x.y kernel is available, then the highest numbered 4.x
 kernel is the current stable kernel.
 
-3.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+4.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
 are released as needs dictate.  The normal release period is approximately
 two weeks, but it can be longer if there are no pressing problems.  A
 security-related problem, instead, can cause a release to happen almost
@@ -285,7 +285,7 @@ The file Documentation/stable_kernel_rules.txt in the kernel tree
 documents what kinds of changes are acceptable for the -stable tree, and
 how the release process works.
 
-3.x -git patches
+4.x -git patches
 ------------------
 These are daily snapshots of Linus' kernel tree which are managed in a
 git repository (hence the name.) These patches are usually released
@@ -317,9 +317,9 @@ revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
 http://patchwork.kernel.org/.
 
-3.x -next kernel tree for integration tests
+4.x -next kernel tree for integration tests
 ---------------------------------------------
-Before updates from subsystem trees are merged into the mainline 3.x
+Before updates from subsystem trees are merged into the mainline 4.x
 tree, they need to be integration-tested.  For this purpose, a special
 testing repository exists into which virtually all subsystem trees are
 pulled on an almost daily basis:

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -30,6 +30,10 @@ Optional properties:
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"
+- ports-implemented : Mask that indicates which ports that the HBA supports
+		      are available for software to use. Useful if PORTS_IMPL
+		      is not programmed by the BIOS, which is true with
+		      some embedded SOC's.
 
 Required properties when using sub-nodes:
 - #address-cells    : number of cells to encode an address

Documentation/devicetree/bindings/clock/keystone-pll.txt

@@ -15,8 +15,8 @@ Required properties:
 - compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
 - clocks : parent clock phandle
 - reg - pll control0 and pll multipler registers
-- reg-names : control and multiplier. The multiplier is applicable only for
-		main pll clock
+- reg-names : control, multiplier and post-divider. The multiplier and
+		post-divider registers are applicable only for main pll clock
 - fixed-postdiv : fixed post divider value. If absent, use clkod register bits
 		for postdiv
 
@@ -25,8 +25,8 @@ Example:
 		#clock-cells = <0>;
 		compatible = "ti,keystone,main-pll-clock";
 		clocks = <&refclksys>;
-		reg = <0x02620350 4>, <0x02310110 4>;
-		reg-names = "control", "multiplier";
+		reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>;
+		reg-names = "control", "multiplier", "post-divider";
 		fixed-postdiv = <2>;
 	};
 

Documentation/devicetree/bindings/crypto/samsung-sss.txt

@@ -23,10 +23,8 @@ Required properties:
   - "samsung,exynos4210-secss" for Exynos4210, Exynos4212, Exynos4412, Exynos5250,
 		Exynos5260 and Exynos5420 SoCs.
 - reg : Offset and length of the register set for the module
-- interrupts : interrupt specifiers of SSS module interrupts, should contain
-		following entries:
-		- first : feed control interrupt (required for all variants),
-		- second : hash interrupt (required only for samsung,s5pv210-secss).
+- interrupts : interrupt specifiers of SSS module interrupts (one feed
+		control interrupt).
 
 - clocks : list of clock phandle and specifier pairs for all clocks  listed in
 		clock-names property.

Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt

@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
 		      80 81 68 69
 		      70 71 72 73
 		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 			  "saif0", "saif1", "i2c0", "i2c1",
 			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

Documentation/devicetree/bindings/net/ethernet.txt

@@ -19,7 +19,11 @@ The following properties are common to the Ethernet controllers:
 - phy: the same as "phy-handle" property, not recommended for new bindings.
 - phy-device: the same as "phy-handle" property, not recommended for new
   bindings.
+- managed: string, specifies the PHY management type. Supported values are:
+  "auto", "in-band-status". "auto" is the default, it usess MDIO for
+  management if fixed-link is not specified.
 
 Child nodes of the Ethernet controller are typically the individual PHY devices
 connected via the MDIO bus (sometimes the MDIO bus controller is separate).
 They are described in the phy.txt file in this same directory.
+For non-MDIO PHY management see fixed-link.txt.

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

@@ -1,7 +1,7 @@
 * Marvell Armada 370 / Armada XP Ethernet Controller (NETA)
 
 Required properties:
-- compatible: should be "marvell,armada-370-neta".
+- compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta".
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.

Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt

@@ -92,5 +92,5 @@ mpp61         61       gpo, dev(wen1), uart1(txd), audio(rclk)
 mpp62         62       gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
                        audio(mclk), uart0(cts)
 mpp63         63       gpo, spi0(sck), tclk
-mpp64         64       gpio, spi0(miso), spi0-1(cs1)
-mpp65         65       gpio, spi0(mosi), spi0-1(cs2)
+mpp64         64       gpio, spi0(miso), spi0(cs1)
+mpp65         65       gpio, spi0(mosi), spi0(cs2)

Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt

@@ -22,8 +22,8 @@ mpp5          5        gpio, dev(ad7), spi0(cs2), spi1(cs2)
 mpp6          6        gpio, dev(ad0), led(p1), audio(rclk)
 mpp7          7        gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
 mpp8          8        gpio, dev (bootcs), spi0(cs0), spi1(cs0)
-mpp9          9        gpio, nf(wen), spi0(sck), spi1(sck)
-mpp10        10        gpio, nf(ren), dram(vttctrl), led(c1)
+mpp9          9        gpio, spi0(sck), spi1(sck), nand(we)
+mpp10        10        gpio, dram(vttctrl), led(c1), nand(re)
 mpp11        11        gpio, dev(a0), led(c2), audio(sdo)
 mpp12        12        gpio, dev(a1), audio(bclk)
 mpp13        13        gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn)

Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt

@@ -27,15 +27,15 @@ mpp8          8        gpio, ge0(txd1), dev(ad10)
 mpp9          9        gpio, ge0(txd2), dev(ad11)
 mpp10         10       gpio, ge0(txd3), dev(ad12)
 mpp11         11       gpio, ge0(txctl), dev(ad13)
-mpp12         12       gpio, ge0(rxd0), pcie0(rstout), pcie1(rstout) [1], spi0(cs1), dev(ad14)
-mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15)
-mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1)
-mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi), pcie1(rstout) [1]
-mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq)
+mpp12         12       gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq)
+mpp13         13       gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq)
+mpp14         14       gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1), pcie3(clkreq)
+mpp15         15       gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi)
+mpp16         16       gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1]
 mpp17         17       gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt)
-mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0), pcie1(rstout) [1]
-mpp19         19       gpio, ge0(col), ptp(event_req), pcie0(clkreq), sata1(prsnt), ua0(cts)
-mpp20         20       gpio, ge0(txclk), ptp(clk), pcie1(rstout) [1], sata0(prsnt), ua0(rts)
+mpp18         18       gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0)
+mpp19         19       gpio, ge0(col), ptp(event_req), ge0(txerr), sata1(prsnt), ua0(cts)
+mpp20         20       gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts)
 mpp21         21       gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs)
 mpp22         22       gpio, spi0(mosi), dev(ad0)
 mpp23         23       gpio, spi0(sck), dev(ad2)
@@ -58,23 +58,23 @@ mpp39         39       gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2)
 mpp40         40       gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
 mpp41         41       gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last)
 mpp42         42       gpio, ua1(txd), ua0(rts), dev(ad7)
-mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), pcie0(rstout), dev(clkout)
-mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3], pcie0(rstout)
-mpp45         45       gpio, ref(clk_out0), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp46         46       gpio, ref(clk_out1), pcie0(rstout), pcie1(rstout) [1], pcie2(rstout), pcie3(rstout)
-mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], spi1(cs2), sata3(prsnt) [2]
-mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4)
-mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5)
-mpp50         50       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(drx), audio(extclk), sd0(cmd)
+mpp43         43       gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), spi1(cs2), dev(clkout)
+mpp44         44       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3]
+mpp45         45       gpio, ref(clk_out0), pcie0(rstout)
+mpp46         46       gpio, ref(clk_out1), pcie0(rstout)
+mpp47         47       gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2]
+mpp48         48       gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4), pcie0(clkreq)
+mpp49         49       gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5), pcie1(clkreq)
+mpp50         50       gpio, pcie0(rstout), tdm2c(drx), audio(extclk), sd0(cmd)
 mpp51         51       gpio, tdm2c(dtx), audio(sdo), m(decc_err)
-mpp52         52       gpio, pcie0(rstout), pcie1(rstout) [1], tdm2c(intn), audio(sdi), sd0(d6)
+mpp52         52       gpio, pcie0(rstout), tdm2c(intn), audio(sdi), sd0(d6)
 mpp53         53       gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7)
-mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), pcie1(rstout) [1], sd0(d3)
+mpp54         54       gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3)
 mpp55         55       gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0)
 mpp56         56       gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi)
 mpp57         57       gpio, spi1(sck), sd0(clk)
 mpp58         58       gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1)
-mpp59         59       gpio, pcie0(rstout), i2c1(sda), pcie1(rstout) [1], spi1(cs0), sd0(d2)
+mpp59         59       gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
 
 [1]: only available on 88F6820 and 88F6828
 [2]: only available on 88F6828

Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt

@@ -42,37 +42,34 @@ mpp20         20       gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
 mpp21         21       gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat)
 mpp22         22       gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
 mpp23         23       gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
-mpp24         24       gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst)
-mpp25         25       gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk)
-mpp26         26       gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd)
+mpp24         24       gpio, lcd(hsync), sata1(prsnt), tdm(rst)
+mpp25         25       gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
+mpp26         26       gpio, lcd(clk), tdm(fsync)
 mpp27         27       gpio, lcd(e), tdm(dtx), ptp(trig)
 mpp28         28       gpio, lcd(pwm), tdm(drx), ptp(evreq)
-mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd)
+mpp29         29       gpio, lcd(ref-clk), tdm(int0), ptp(clk)
 mpp30         30       gpio, tdm(int1), sd0(clk)
-mpp31         31       gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd)
-mpp32         32       gpio, tdm(int3), sd0(d0), vdd(cpu1-pd)
+mpp31         31       gpio, tdm(int2), sd0(cmd)
+mpp32         32       gpio, tdm(int3), sd0(d0)
 mpp33         33       gpio, tdm(int4), sd0(d1), mem(bat)
 mpp34         34       gpio, tdm(int5), sd0(d2), sata0(prsnt)
 mpp35         35       gpio, tdm(int6), sd0(d3), sata1(prsnt)
 mpp36         36       gpio, spi(mosi)
 mpp37         37       gpio, spi(miso)
 mpp38         38       gpio, spi(sck)
 mpp39         39       gpio, spi(cs0)
-mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd),
-                       pcie(clkreq0)
+mpp40         40       gpio, spi(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0)
 mpp41         41       gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
                        pcie(clkreq1)
-mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer),
-                       vdd(cpu0-pd)
-mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout),
-                       vdd(cpu2-3-pd){1}
+mpp42         42       gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer)
+mpp43         43       gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout)
 mpp44         44       gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2),
                        mem(bat)
 mpp45         45       gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt)
 mpp46         46       gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt)
 mpp47         47       gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3),
                        ref(clkout)
-mpp48         48       gpio, tclk, dev(burst/last)
+mpp48         48       gpio, dev(clkout), dev(burst/last)
 
 * Marvell Armada XP (mv78260 and mv78460 only)
 
@@ -84,9 +81,9 @@ mpp51         51       gpio, dev(ad16)
 mpp52         52       gpio, dev(ad17)
 mpp53         53       gpio, dev(ad18)
 mpp54         54       gpio, dev(ad19)
-mpp55         55       gpio, dev(ad20), vdd(cpu0-pd)
-mpp56         56       gpio, dev(ad21), vdd(cpu1-pd)
-mpp57         57       gpio, dev(ad22), vdd(cpu2-3-pd){1}
+mpp55         55       gpio, dev(ad20)
+mpp56         56       gpio, dev(ad21)
+mpp57         57       gpio, dev(ad22)
 mpp58         58       gpio, dev(ad23)
 mpp59         59       gpio, dev(ad24)
 mpp60         60       gpio, dev(ad25)
@@ -96,6 +93,3 @@ mpp63         63       gpio, dev(ad28)
 mpp64         64       gpio, dev(ad29)
 mpp65         65       gpio, dev(ad30)
 mpp66         66       gpio, dev(ad31)
-
-Notes:
-* {1} vdd(cpu2-3-pd) only available on mv78460.