Note This driver being replaced by a userspace library libeizo.

If you want help with your monitor open any issues there.

OpenEizo

A small WIP Linux HID device driver to control Eizo EV FlexScan monitors.

Aims

To reverse engineer the protocol used to control Eizo EV FlexScan monitors, and write an open source Linux driver as a replacement for Eizo's own proprietary and Windows only Screen InStyle software.

Monitor Support

This driver aims to support the following monitors.

Model	Size	PID	Tested
EV3895	37.5	4065
EV2795	27	405F
EV2495	24.1	405E
EV3285	31.5	4037
EV2785	27	4036
EV2780	27	402b
EV2480	23.8	406a
EV2760	27	4059	✅
EV2750	27	4014
EV2457	24.1	4044
EV2456	24.1	4027
EV2455	24.1	4002
EV2460	23.8	405B
EV2451	23.8	4026
EV2450	23.9	4001
EV2360	22.5	405A
EV3237	31.5	4000
EV2490	23.8	?
EV2781	27	?
EV2485	24.1	?
EV2740X	27	?
EV3240X	31.5	?

Running

By itself the driver only creates a child hid device using a secondary descriptor fetched from the monitor. This child device provides a simplified interface for controlling the monitor.

Below is an example program using hidapi to set the brightness to 85. Make sure you have appropriate permissions using udev/eizo.rules, and add yourself to the eizo group.

#include <stdio.h>
#include <hidapi/hidapi.h>

int main() {
    hid_init();
    
    // Open the HID raw device
    // Set this to the path of the device the driver creates.
    struct hid_device_ *dev = hid_open_path("/dev/hidraw13");
    if(dev) {
        // Define a buffer big enough for the report
        // The maximum size for any report is 513
        unsigned char val[3];
        
        // Set the report number to brightness
        val[0] = 82;
        
        // Set the le uint16 brightness value
        val[1] = 170;
        val[2] = 0;
        
        // Send the report and either return an error or the actual number 
        // of bytes written.
        int len = hid_send_feature_report(dev, val, sizeof(val));
        if (len >= 0) {
            printf("%d bytes written", len);
        } else {
            const wchar_t *err = hid_error(dev);
            fwprintf(stderr, L"%ls\n", err);
        }

        hid_close(dev);
    }

    hid_exit();
    return 0;
}

Contributing

If you have an EV FlexScan monitor then please open an issue with info on which monitor you have with its PID, so we can work towards supporting it.

$ lsusb | grep 056d
Bus 003 Device 006: ID 056d:4059 EIZO Corp. FlexScan EV2760

In order to reverse engineer you will need to run a windows virtual machine with Eizo's software running and some packet sniffer such as Wireshark with USBPcap/usbmon.

Disclaimer

This is experimental software and is neither endorsed nor supported by Eizo Corp.

It is provided in the hope that it will be useful and comes with absolutely no warranty.

Use at your own risk.