Write a paper directly in Obsidian! Export an Obsidian note to a full-fledged LaTeX paper, including embedded content, LaTeX environments, citations, references, LaTeX sections, figures and more. All content that is visible in obsidian will be included in the export!
This plugin supports:
- Embedded content, including embedded content from headers.
- LaTeX environments (e.g., \begin{theorem} environment, or lemma, etc.).
- Seamless references to LaTeX environments from wikilinks.
- Citations: of many kinds, including multi-citations.
- LaTeX sections from Markdown headers (and subsections, etc.)
- References to sections.
- Equation references, including within
alignenvironments. - Title and author from the YAML header.
- Specialized abstract and appendix sections.
- Template-based exports.
- Selection export to the clipboard.
- Conversion of most markdown elements supported by Obsidian to equivalents in latex.
- Export of markdown quotes to LaTeX comments.
- Obsidian comments
%%...%%excluded from the export.
This plugin is best used with plugins:
- Zotero integration (see https://mscott99.github.io/matthew_s_scott_zettel/Setup%20workflows/Setup%20citations/ to configure the settings appropriately), or Citations (almost required to work with citations.)
- Breadcrumbs.
- Extended MathJax, to use latex macros both in Obsidian and in the export.
Currently, using a set of notes in a vault to produce a single polished text is a non-trivial task. This is an obstacle in the overall writing task which fragments the writing process across tools: note-taking in Obsidian, followed by final writing in Overleaf. With this plugin, a single unified workflow becomes possible, spanning from ideation all the way to the final product, all in Obsidian. Keep writing your paper in Obsidian until the content is polished, and your completed paper is a click away. With this plugin, your paper can emerge organically from your graph of notes.
Here is how it works. You should create a "longform" note which structures the content, primarily through embed links (a.k.a. transclusions). The longform note specifies the sections of the main text and assembles content from other notes into a linear piece of writing. The paper should be readable from this note alone when viewed in Obsidian, even though the content may be spread across your vault. Then, exporting this embed-heavy note with Latex Exporter will extract all the relevant content from your vault and create a single LaTeX output file.
For example, let's say that you have a theorem which you would like to include in your paper. The theorem should reside in its own note, with the statement under the header Statement and its proof under the Proof header in the same note. Then in the longform note,
you may want to include the statement of the theorem in the introduction by writing theorem::![[theorem_note#Statement]] on a new line. You would like to defer the proof to a later section. In that later section, you embed the proof by writing proof::![[theorem_note#Proof]]. Hyperlinks between the theorem and the proof will be automatically generated when exporting the longform note. What about referencing this theorem? For this you should use a standard wikilink, [[theorem_note]]. Note that the embedding structure can be recursive; as long as the content is visible in Obsidian from the longform note, it will be included in the export. If we think of the individual Markdown files, this means that an embedding statement like theorem::![[theorem_note#Statement]] may be situated within some third note third_note.md, which is itself embedded into the longform note, and the two-layers-deep content will still be fetched and added to the exported file.
This plugin uses the information found in the graphical organization of notes to create a sensible LaTeX document. It is not attempting to match the obsidian note visually, only its content. The LaTeX code in the export is minimal as much as possible, so that the author can later edit it if necessary.
See the subdirectory example/vault of the repository hosting this plugin for an example of an export. The corresponding PDF can be found here.
| Obsidian | LaTeX Export |
|---|---|
 |
 |
 |
 |
 |
 |
 |
Navigate to the "longform" note that you would like to export, and run the command Export to paper. The plugin will create a folder in the root of your vault (or in the appropriate sub-folder inside your vault, if specified in the settings of the plugin), and will write all required files to this folder. The entire content inside the longform note will be exported, except if there is an h1 header named Body in the note, in which case only the content under Body will be exported. Additionally, content h1 headers Abstract and Appendix will be exported appropriately.
To use citations, place a bib file named bibliography.bib in the root of your vault; it will be copied upon export to the correct location. Also, you can place a file preamble.sty containing a LaTeX preamble in the root of the vault, which will also be copied to the export directory. The preamble.sty file is meant to be used with the Extended MathJax plugin. Manual changes to the exported files bibliography.bib and preamble.sty inside export directories will not be overwritten by later exports.
Using a template: In the settings, it is possible to specify the path to a template file. If this field is left blank, then the plugin will generate minimal LaTeX code required for the export to compile well. To use a template, place a template file inside your vault and specify its path in the plugin settings. A template file should contains LaTeX code with a pandoc-style anchor $body$, to be replaced by the converted content of the longform note. The anchors $abstract$ and $appendix$ can optionally be specified.
Before making manual changes to the exported LaTeX file, be careful to first copy the newly-generated folder to a different location, because under some settings (not the default), re-running the export command from the same note will overwrite the exported LaTeX file (surrounding files, like the preamble or bib file, will not be overwritten). This overwriting setting is meant to facilitate editing the obsidian files while seeing the updated LaTeX output quickly.
This command exports the selected portion of the current note to the clipboard. To use this command, navigate to the note of interest, go to the editing view (it does not work in reading view), select a portion of the note by dragging your cursor, and while the text is selected run Cmd+P and select the command Latex Exporter:Export selection. Be warned that the LaTeX exported using this method will only compile well if pasted into a document that imports the relevant LaTeX packages.
Heed the warnings! They are (usually) not bugs, but an important part of the plugin. They give you helpful feedback as to what should be fixed within your own notes to ensure a good export. For example, you may have a wikilink (which is trying to become a reference) addressed to a header which happens to not be visible from the longform note. The plugin will detect some such structural issues and tell you about it.
The warnings appear as notices, but these go away quickly. To see them longer, you can find them in the developer console that you can access with Ctrl + Shift + I on Windows/Linux, or Cmd + Option + I on Mac.
Some other mistakes go undetected in the export phase, so it is a good idea to also look at diagnostic warnings from latex editors that appear within the exported latex documents. These may tell you about other mistakes in your notes.
If you get an export problem which does not come from your notes, and is not listed in [[#Known limitations]], bug reports on GitHub are highly appreciated!
Most markdown elements supported by Obsidian are supported by this plugin, with the notable exception of tables.
h1 headers become Latex sections, h2 and onwards become subsections of the correct depth. If the export occurs within a Body h1 header, then these are offset by 1: h2 headers will be sections.
There are two ways of specifying LaTeX environments: through embeds and explicitly.
Place your theorem in a note distinct from the longform note. In the theorem note, specify a h1 header # Statement under which the statement should be written. If a proof is given, write it under another h1 header in the same note # Proof. Then in the main note, embed the statement with the following syntax.
theorem::![[theorem_note_title#Statement]]
To provide the proof, write the following at the desired location:
proof::![[theorem_note_title#Proof]]
The label theorem can be modified to lemma, corollary, or any other environment name. A hyperlink from the proof to the corresponding result will be created automatically (it will look like proof of Lemma 3.1.)
Results embedded in this way are referenced with wikilinks: [[theorem_note_title]]. The generated LaTeX label of an embedded environement depends on both the note of origin and the header of origin of the embedded content. This means you may choose to have many results in the same note, under different headers. If no header is specified in the referencing wikilink, the plugin defaults to a possible Statement header, i.e., it is no different than if the wikilink was of the form [[theorem_note_title#Statement]]. Other headers can be used, e.g. lemma::![[theorem_note_title#Other Statement]]. Such a result can be referenced with [[theorem_note_title#Other Statement]]. However, only a Statement header has an implicit association with a possible Proof header in the same file.
LaTeX environments can be written directly in the main note with the following syntax.
lemma::
The following is always true.
$$\prod > \sum$$
::lemma{#lem-lem_label}
The label {#lem-lem_label} is optional. If it is specified, the lemma can be referenced using @lem-lem_label. The labels must have the syntax lem-..., where the identifier lem must be one of the following: ref, loc, tbl, eq, lem, sec, lst, thm, def, ex, exr, prf, alg.
The following syntax is recognized: $inline_math$and $$display_math$$. Display equations are exported to the equation* environment by default, though the LaTeX environment may vary.
Equations are labelled with the quarto syntax $$...$${#eq-my_label} where the required format is {#eq-...}. Equations are referenced with @eq-my_label. For align environments, labelling goes as follows.
$$\begin{align}
hey &= hi \\
and &= other \\
\end{align}$${#eq-align_label}
The first line in the align environment can be referenced with @eq-align_label-1 and the second with @eq-align_label-2, and so on. The reference @eq-align_label will not work.
A simple embed ![[Other note]] without a breadcrumb-like attribute of the style theorem:: will embed the content into the main note without creating a LaTeX environment, even if this embed wikilink specifies a header. As always in this plugin, embeds are recursive; it is fine to have many layers deep of embeds.
Citations are wikilinks starting with the '@' character, immediately followed by the bibtex key. To use this feature it is strongly encouraged to use either the Zotero integration plugin (recommended, and it should be set up so that the citations match the aformentionned format, see https://mscott99.github.io/matthew_s_scott_zettel/Setup%20workflows/Setup%20citations/ for how to do this) or the Citations plugin. Pandoc-style citations are also supported, with some limitations. Any citation with a locator will become a cite command \\cite. To get the author names to be displayed, you can set the 'default citation command' option in the plugin settings to "textcite". Citations can also have labels (locators) to reference specific results in a source, in which case they look like [[@<bibtex_key>]][<label>] or @<bibtex_key>[<label>] and gives an output of \cite[<label>]{<bibtex_key>}.
The default citation command is \cite{} from the biblatex package, although a different default citation command can be set in the settings. If a different default citation command is set, a link of the form [[@...]][std] will be converted to \cite{}. Specifying [txt] as a label will instead ensure the use of \textcite{}. If many citations wikilinks are given consecutively without any characters between them, they will be included in a single LaTeX citation command, meaning that [[@first]][[@second]] becomes \\cite{@first, @second}.
Figures are created from embed links of image files, and are recognized by their file suffix. A caption can be added in the display section of the link: ![[image.jpeg|caption text here]]. There are some themes in Obsidian which will display captions of this kind.
Images will be copied to a subfolder of the output folder named "Files".
To export excalidraw embedded images, follow the following instructions.
- In the Excalidraw settings, enable "Embedding Excalidraw into your Notes and Exporting > Export Settings > Auto-export Settings > Auto-export PNG".
- Make sure that the PNG exported by Excalidraw is in the /Files folder at the root of your vault. The embedding wikilink can be to the Excalidraw note (instead of the exported PNG).
Both ordered, and unordered lists are supported. Lines following a number will be included in the item, regardless of indent. To finish a list, leave a blank line. Nested unordered lists are not supported.
Let me know through issues on GitHub if enhanced support for some of these are of interest to you.
- Tables are not supported.
- An equation in display math may be incorrectly parsed as a list within a display math block. To avoid this, make sure that any line that starts with '-' or '+' should have no space right after the symbols '-', '+'.
- Limited parsing of lists (especially nested lists); they are indent-blind.
- Inline code is not supported, and display code is not tested.
If you would like to support me, I appreciate it!
- Export to TeX: A very similar plugin. Latex Exporter seems to have more features in the export for references and citations, an Export to TeX has other advantages, such as exporting outside the vault.
- Obsidian-to-latex: python export tool with a different focus.
- Plugin: Latex-like Theorem & Equation Referencer. It focuses on writing everything within single notes, whereas Latex Exporter uses the graph nature of Obsidian. It has improved visuals for theorems withing Obsidian. Compatibility with that plugin is a possible improvement of Latex Exporter plugin.
- Plugin: Copy as LaTeX. Similar to the
Export selectioncommand, but without support for embedded content.