Add OpenAPI 3.1 support

.github/workflows/build-openapi-bundle.yml

@@ -15,20 +15,25 @@ jobs:
     - name: Setup npm
       uses: actions/setup-node@v4
     - name: Install dependencies
-      run: npm install -g @apidevtools/swagger-cli
+      run: npm install @redocly/cli -g
     - name: Checkout
       uses: actions/checkout@master
       with:
         fetch-depth: 0
-    - name: Generate OpenAPI bundle
+    - name: Generate OpenAPI 3.0 bundle
       run: |
         cd core/standard/openapi
-        swagger-cli bundle -o /tmp/ogcapi-environmental-data-retrieval-1.bundled.json ogcapi-environmental-data-retrieval-1.yaml
+        redocly bundle -o /tmp/ogcapi-environmental-data-retrieval-1-oas30.bundled.json ogcapi-environmental-data-retrieval-1-oas30.yaml
+    - name: Generate OpenAPI 3.1 bundle
+      run: |
+        cd core/standard/openapi
+        redocly bundle -o /tmp/ogcapi-environmental-data-retrieval-1.bundled-oas31.json ogcapi-environmental-data-retrieval-1-oas31.yaml
     - name: Commit changes and push
       run: |
         git config --global user.email "tomkralidis@gmail.com"
         git config --global user.name "Tom Kralidis"
-        mv -f /tmp/ogcapi-environmental-data-retrieval-1.bundled.json .
+        mv -f /tmp/ogcapi-environmental-data-retrieval-1-oas30.bundled.json .
+        mv -f /tmp/ogcapi-environmental-data-retrieval-1-oas31.bundled.json .
         if [[ `git status --porcelain` ]]; then
           git add .
           git commit -am "Updating OpenAPI build"

.github/workflows/test-build-openapi-bundle.yml

@@ -15,16 +15,20 @@ jobs:
     - name: Setup npm
       uses: actions/setup-node@v4
     - name: Install dependencies
-      run: npm install -g @apidevtools/swagger-cli
+      run: npm install @redocly/cli -g
     - name: Checkout
       uses: actions/checkout@master
       with:
         repository: ${{ github.event.pull_request.head.repo.full_name }}
         ref: ${{ github.event.pull_request.head.ref }}
       #with:
       #  fetch-depth: 0
-    - name: Generate OpenAPI bundle
+    - name: Generate OpenAPI 3.0 bundle
       run: |
         cd core/standard/openapi
-        swagger-cli bundle -o ogcapi-environmental-data-retrieval-1.bundled.json ogcapi-environmental-data-retrieval-1.yaml
+        redocly bundle -o ogcapi-environmental-data-retrieval-1-oas30.bundled.json ogcapi-environmental-data-retrieval-1-oas30.yaml
+    - name: Generate OpenAPI 3.1 bundle
+      run: |
+        cd core/standard/openapi       
+        redocly bundle -o ogcapi-environmental-data-retrieval-1-oas31.bundled.json ogcapi-environmental-data-retrieval-1-oas31.yaml
 

LICENSE

@@ -8,4 +8,4 @@ THE INTELLECTUAL PROPERTY IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXP
 
 This license is effective until terminated. You may terminate it at any time by destroying the Intellectual Property together with all copies in any form. The license will also terminate if you fail to comply with any term or condition of this Agreement. Except as provided in the following sentence, no such termination of this license shall require the termination of any third party end-user sublicense to the Intellectual Property which is in force as of the date of notice of such termination. In addition, should the Intellectual Property, or the operation of the Intellectual Property, infringe, or in LICENSOR’s sole opinion be likely to infringe, any patent, copyright, trademark or other right of a third party, you agree that LICENSOR, in its sole discretion, may terminate this license without any compensation or liability to you, your licensees or any other party. You agree upon termination of any kind to destroy or cause to be destroyed the Intellectual Property together with all copies in any form, whether held by you or by any third party.
 
-Except as contained in this notice, the name of LICENSOR or of any other holder of a copyright in all or part of the Intellectual Property shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Intellectual Property without prior written authorization of LICENSOR or such copyright holder. LICENSOR is and shall at all times be the sole entity that may authorize you or any third party to use certification marks, trademarks or other special designations to indicate compliance with any LICENSOR standards or specifications. This Agreement is governed by the laws of the Commonwealth of Massachusetts. The application to this Agreement of the United Nations Convention on Contracts for the International Sale of Goods is hereby expressly excluded. In the event any provision of this Agreement shall be deemed unenforceable, void or invalid, such provision shall be modified so as to make it valid and enforceable, and as so modified the entire Agreement shall remain in full force and effect. No decision, action or inaction by LICENSOR shall be construed to be a waiver of any rights or remedies available to it.
+Except as contained in this notice, the name of LICENSOR or of any other holder of a copyright in all or part of the Intellectual Property shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Intellectual Property without prior written authorization of LICENSOR or such copyright holder. LICENSOR is and shall at all times be the sole entity that may authorize you or any third party to use certification marks, trademarks or other special designations to indicate compliance with any LICENSOR standards or specifications. This Agreement is governed by the laws of the Commonwealth of Massachusetts. The application to this Agreement of the United Nations Convention on Contracts for the International Sale of Goods is hereby expressly excluded. In the event any provision of this Agreement shall be deemed unenforceable, void or invalid, such provision SHALL be modified so as to make it valid and enforceable, and as so modified the entire Agreement shall remain in full force and effect. No decision, action or inaction by LICENSOR shall be construed to be a waiver of any rights or remedies available to it.

core/standard/abstract_tests/ATS_class_oas30.adoc

@@ -1,4 +1,4 @@
-[[ats_oas3]]
+[[ats_oas30]]
 [conformance_class]
 .OpenAPI 3.0
 ====

core/standard/abstract_tests/ATS_class_oas31.adoc

@@ -0,0 +1,28 @@
+[[ats_oas31]]
+[conformance_class]
+.OpenAPI 3.1
+====
+[%metadata]
+identifier:: https://www.opengis.net/spec/ogcapi-edr-1/1.2/conf/oas31
+subject:: <<rc_oas31,https://www.opengis.net/spec/ogcapi-edr-1/1.2/req/oas31>>
+classification:: Target Type:Web API
+inherit:: https://www.opengis.net/spec/ogcapi-edr-1/1.2/conf/core
+conformance-test:: /conf/oas31/completeness
+conformance-test:: /conf/oas31/exceptions-codes
+conformance-test:: /conf/oas31/oas-definition-1
+conformance-test:: /conf/oas31/oas-definition-2
+conformance-test:: /conf/oas31/oas-impl
+conformance-test:: /conf/oas31/security
+====
+
+include::oas31/ATS_completeness.adoc[]
+
+include::oas31/ATS_exception-codes.adoc[]
+
+include::oas31/ATS_definition-1.adoc[]
+
+include::oas31/ATS_definition-2.adoc[]
+
+include::oas31/ATS_oas-impl.adoc[]
+
+include::oas31/ATS_security.adoc[]

core/standard/abstract_tests/README.md

@@ -24,4 +24,4 @@ The test is expressed according to this pattern:
 * <<req_cc_req,Requirement /req/cc/req>>
 ````
 
-NOTE: for each test, there shall be one or more requirements in the "requirements" folder.
+NOTE: for each test, there SHALL be one or more requirements in the "requirements" folder.

core/standard/abstract_tests/collections/ATS_rc-coords-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the coords query parameters are constructed correct
 test-method::
 +
 --
-Verify that the `coords` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `coords` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-coords-response.adoc

@@ -11,6 +11,6 @@ test-method::
 --
 . Verify that only resources that have a spatial geometry that intersects the coordinates are returned as part of the result set.
 . Verify `coords` values are valid for the specified coordinate reference system
-. Verify that the coordinate reference system of the geometries is valid for the parameter defined by `crs`. If the `crs` parameter is not defined the geometries shall be valid for the coordinate reference system defined by the spatial element of the extent section in the collection response.
+. Verify that the coordinate reference system of the geometries is valid for the parameter defined by `crs`. If the `crs` parameter is not defined the geometries SHALL be valid for the coordinate reference system defined by the spatial element of the extent section in the collection response.
 --
 ====

core/standard/abstract_tests/collections/ATS_rc-corridor-height-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that the `corridor-height` query parameter is constructe
 test-method::
 +
 --
-Verify that the `corridor-height` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `corridor-height` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-corridor-width-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that the `corridor-width` query parameter is constructed
 test-method::
 +
 --
-Verify that the `corridor-width` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `corridor-width` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-crs-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the crs query parameters are constructed correctly.
 test-method::
 +
 --
-Verify that the `crs` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `crs` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-custom-dimension-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that any custom query parameters are constructed correct
 test-method::
 +
 --
-Verify that any <<rc_custom-dimensions-section,custom dimension>> query parameters comply with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that any <<rc_custom-dimensions-section,custom dimension>> query parameters comply with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-f-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the `f` query parameter is constructed correctly.
 test-method::
 +
 --
-Verify that the `f` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `f` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-height-units-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that the `height-units` query parameter is constructed c
 test-method::
 +
 --
-Verify that the `within-units` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `within-units` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-limit-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that the limit query parameters are defined correctly.
 test-method::
 +
 --
-Verify that the `limit` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `limit` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-max-z-definition.adoc

@@ -5,7 +5,7 @@
 ^|*Abstract Test {ats-id}* |*/conf/edr/rc-max-z-definition*
 ^|Test Purpose |Validate that the minimum vertical level query parameters are constructed correctly.
 ^|Requirement |<<req_edr_max-z-definition,/req/edr/max-z-definition>>
-^|Test Method |Verify that the `max-z` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+^|Test Method |Verify that the `max-z` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-md-collection-info-table.adoc

@@ -3,6 +3,6 @@
 [width="90%",cols="3",options="header"]
 |===
 |Format |Schema Document |Test ID
-|HTML |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/schemas/collections/collection.yaml[collection.yaml]|<<ats_html_content,/conf/html/content>>
-|JSON |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/schemas/collections/collection.yaml[collection.yaml] |<<ats_json_content,/conf/json/content>>
+|HTML |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/oas31/schemas/collections/collection.yaml[collection.yaml]|<<ats_html_content,/conf/html/content>>
+|JSON |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/oas31/schemas/collections/collection.yaml[collection.yaml] |<<ats_json_content,/conf/json/content>>
 |===

core/standard/abstract_tests/collections/ATS_rc-md-success-table.adoc

@@ -3,6 +3,6 @@
 [width="90%",cols="3",options="header"]
 |===
 |Format |Schema Document |Test ID
-|HTML |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/schemas/collections/collections.yaml[collections.yaml]|<<ats_html_content,/conf/html/content>>
-|JSON |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/schemas/collections/collections.yaml[collections.yaml] |<<ats_geojson_content,/conf/geojson/content>>
+|HTML |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/oas31/schemas/collections/collections.yaml[collections.yaml]|<<ats_html_content,/conf/html/content>>
+|JSON |link:https://schemas.opengis.net/ogcapi/edr/1.2/openapi/oas31/schemas/collections/collections.yaml[collections.yaml] |<<ats_geojson_content,/conf/geojson/content>>
 |===

core/standard/abstract_tests/collections/ATS_rc-min-z-definition.adoc

@@ -5,7 +5,7 @@
 ^|*Abstract Test {ats-id}* |*/conf/edr/rc-min-z-definition*
 ^|Test Purpose |Validate that the minimum vertical level query parameters are constructed correctly.
 ^|Requirement |<<req_collections_rc-min-z-definition,/req/edr/min-z-definition>>
-^|Test Method |Verify that the `min-z` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+^|Test Method |Verify that the `min-z` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-parameter-name-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the parameter-name query parameters are constructed
 test-method::
 +
 --
-Verify that the `parameter-name` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `parameter-name` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-width-units-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that the `width-units` query parameter is constructed co
 test-method::
 +
 --
-Verify that the `width-units` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `width-units` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/ATS_rc-z-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the vertical level query parameters are constructed
 test-method::
 +
 --
-Verify that the `z` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `z` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/area/ATS_rc-coords-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the coords query parameters are constructed correct
 test-method::
 +
 --
-Verify that the `coords` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `coords` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/area/ATS_rc-coords-response.adoc

@@ -11,6 +11,6 @@ test-method::
 --
 . Verify that only resources that have a spatial geometry that intersects the coordinates are returned as part of the result set.
 . Verify `coords` values are valid for the specified coordinate reference system
-. Verify that the coordinate reference system of the geometries is valid for the parameter defined by `crs`. If the `crs` parameter is not defined the geometries shall be valid for the coordinate reference system defined by the spatial element of the extent section in the collection response.
+. Verify that the coordinate reference system of the geometries is valid for the parameter defined by `crs`. If the `crs` parameter is not defined the geometries SHALL be valid for the coordinate reference system defined by the spatial element of the extent section in the collection response.
 --
 ====

core/standard/abstract_tests/collections/area/ATS_rc-crs-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the crs query parameters are constructed correctly.
 test-method::
 +
 --
-Verify that the `crs` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `crs` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/area/ATS_rc-custom-dimension-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that any custom query parameters are constructed correct
 test-method::
 +
 --
-Verify that any <<rc_custom-dimensions-section,custom dimension>> query parameters comply with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that any <<rc_custom-dimensions-section,custom dimension>> query parameters comply with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/area/ATS_rc-f-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the `f` query parameter is constructed correctly.
 test-method::
 +
 --
-Verify that the `f` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `f` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/area/ATS_rc-limit-definition.adoc

@@ -8,7 +8,7 @@ test-purpose:: Validate that the limit query parameters are defined correctly.
 test-method::
 +
 --
-Verify that the `limit` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `limit` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/area/ATS_rc-parameter-name-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the parameter-name query parameters are constructed
 test-method::
 +
 --
-Verify that the `parameter-name` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `parameter-name` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/area/ATS_rc-z-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the vertical level query parameters are constructed
 test-method::
 +
 --
-Verify that the `z` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `z` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/corridor/ATS_rc-coords-definition.adoc

@@ -9,7 +9,7 @@ test-purpose:: Validate that the coords query parameters are constructed correct
 test-method::
 +
 --
-Verify that the `coords` query parameter complies with the following definition (using an OpenAPI Specification 3.0 fragment):
+Verify that the `coords` query parameter complies with the following definition (using an OpenAPI Specification 3.1 fragment):
 
 [source,YAML]
 ----

core/standard/abstract_tests/collections/corridor/ATS_rc-coords-response.adoc

@@ -11,6 +11,6 @@ test-method::
 --
 . Verify that only resources that have a spatial geometry that intersects the coordinates are returned as part of the result set.
 . Verify `coords` values are valid for the specified coordinate reference system
-. Verify that the coordinate reference system of the geometries is valid for the parameter defined by `crs`. If the `crs` parameter is not defined the geometries shall be valid for the coordinate reference system defined by the spatial element of the extent section in the collection response.
+. Verify that the coordinate reference system of the geometries is valid for the parameter defined by `crs`. If the `crs` parameter is not defined the geometries SHALL be valid for the coordinate reference system defined by the spatial element of the extent section in the collection response.
 --
 ====