New sample using YetAnotherArduinoPcIntLibrary

examples/pin_change_interrupts/Pin_Change_Interrupts.ino

@@ -0,0 +1,70 @@
+/*
+ * Example on how to use the Wiegand reader library with YetAnotherPcInt library
+ * https://github.com/paulo-raca/YetAnotherArduinoPcIntLibrary
+ */
+
+#include <Wiegand.h>
+#include <YetAnotherPcInt.h>
+
+// These are the pins connected to the Wiegand D0 and D1 signals.
+// Ensure your board supports external Pin Change Interrupts on these pins
+#define PIN_D0 9
+#define PIN_D1 8
+
+// The object that handles the wiegand protocol
+Wiegand wiegand;
+
+// Initialize Wiegand reader
+void setup() {
+  Serial.begin(9600);
+
+  //Install listeners and initialize Wiegand reader
+  wiegand.onReceive(receivedData, "Card readed: ");
+  wiegand.onStateChange(stateChanged, "State changed: ");
+  wiegand.begin(WIEGAND_LENGTH_AUTO);
+
+  //initialize pins as INPUT and attaches interruptions
+  pinMode(PIN_D0, INPUT);
+  pinMode(PIN_D1, INPUT);
+  PcInt::attachInterrupt(PIN_D0, wiegandD0Changed, &wiegand, CHANGE, true);
+  PcInt::attachInterrupt(PIN_D1, wiegandD1Changed, &wiegand, CHANGE, true);
+}
+
+// Every few milliseconds, check for pending messages on the wiegand reader
+// This executes with interruptions disabled, since the Wiegand library is not thread-safe
+void loop() {
+  noInterrupts();
+  wiegand.flush();
+  interrupts();
+  //Sleep a little -- this doesn't have to run very often.
+  delay(100);
+}
+
+// When any of the pins have changed, update the state of the wiegand library
+void wiegandD0Changed(Wiegand *wiegand, bool value) {
+  wiegand->setPin0State(value);
+}
+void wiegandD1Changed(Wiegand *wiegand, bool value) {
+  wiegand->setPin1State(value);
+}                                                  
+
+// Notifies when a reader has been connected or disconnected.
+// Instead of a message, the seconds parameter can be anything you want -- Whatever you specify on `wiegand.onStateChange()`
+void stateChanged(bool plugged, const char* message) {
+    Serial.print(message);
+    Serial.println(plugged ? "CONNECTED" : "DISCONNECTED");
+}
+
+// Notifies when a card was read.
+// Instead of a message, the seconds parameter can be anything you want -- Whatever you specify on `wiegand.onReceive()`
+void receivedData(uint8_t* data, uint8_t bits, const char* message) {
+    Serial.println(message);
+
+    //Print value in HEX
+    uint8_t bytes = (bits+7)/8;
+    for (int i=0; i<bytes; i++) {
+        Serial.print(data[i] >> 4, 16);
+        Serial.print(data[i] & 0xF, 16);
+    }
+    Serial.println();
+}

library.properties

@@ -1,5 +1,5 @@
 name=Yet Another Arduino Wiegand Library
-version=1.0.0
+version=1.0.1
 author=Paulo Costa
 maintainer=Paulo Costa <me@paulo.costa.nom.br>
 sentence=An Arduino Library to receive data from Wiegand card readers.