[Keyboard] Update Tractyl Manuform and add F405 (weact) variant

keyboards/handwired/tractyl_manuform/5x6_right/config.h

@@ -21,13 +21,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define ROTATIONAL_TRANSFORM_ANGLE  -25
 #define POINTING_DEVICE_INVERT_X
 
-#define DYNAMIC_KEYMAP_LAYER_COUNT  16
-#define LAYER_STATE_16BIT
-
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
 #define POINTING_DEVICE_RIGHT

keyboards/handwired/tractyl_manuform/5x6_right/f405/board.h

@@ -0,0 +1,23 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include_next <board.h>
+
+#undef STM32_HSECLK
+#define STM32_HSECLK 8000000U
+#undef STM32_LSECLK
+#define STM32_LSECLK 32768U

keyboards/handwired/tractyl_manuform/5x6_right/f405/config.h

@@ -0,0 +1,84 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define USER_BUTTON_PIN     C13
+#define DEBUG_LED_PIN       B2
+
+// WS2812 RGB LED strip input and number of LEDs
+#define WS2812_PWM_DRIVER        PWMD3
+#define WS2812_PWM_CHANNEL       1
+#define WS2812_PWM_PAL_MODE      2
+#define WS2812_PWM_DMA_STREAM    STM32_DMA1_STREAM2
+#define WS2812_PWM_DMA_CHANNEL   5
+#define WS2812_EXTERNAL_PULLUP
+
+#define BACKLIGHT_PWM_DRIVER     PWMD8
+#define BACKLIGHT_PWM_CHANNEL    2
+#define BACKLIGHT_PAL_MODE       3
+
+/* Audio config */
+#define AUDIO_PIN               A4
+#define AUDIO_PIN_ALT           A5
+#define AUDIO_PIN_ALT_AS_NEGATIVE
+
+/* serial.c configuration for split keyboard */
+#define SERIAL_USART_DRIVER      SD1
+#define SERIAL_USART_TX_PIN      A10
+#define SERIAL_USART_TX_PAL_MODE 7
+#define SERIAL_USART_RX_PIN      A9
+#define SERIAL_USART_RX_PAL_MODE 7
+#define SERIAL_USART_TIMEOUT     10
+#define SERIAL_USART_SPEED       (1 * 1024 * 1024)
+#define SERIAL_USART_FULL_DUPLEX
+
+
+/* i2c config for oleds */
+#define I2C_DRIVER        I2CD1
+#define I2C1_CLOCK_SPEED  400000
+#define I2C1_DUTY_CYCLE   FAST_DUTY_CYCLE_16_9
+
+/* spi config for eeprom and pmw3360 sensor */
+#define SPI_DRIVER        SPID1
+#define SPI_SCK_PIN       B3
+#define SPI_SCK_PAL_MODE  5
+#define SPI_MOSI_PIN      B5
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN      B4
+#define SPI_MISO_PAL_MODE 5
+
+#define EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN B13
+#define EXTERNAL_FLASH_SPI_CLOCK_DIVISOR    4
+#define EXTERNAL_FLASH_SIZE                 (8 * 1024 * 1024)
+
+/* pmw3360 config  */
+#define POINTING_DEVICE_CS_PIN B8
+#define POINTING_DEVICE_ROTATION_270
+#undef ROTATIONAL_TRANSFORM_ANGLE
+#define PMW33XX_SPI_DIVISOR 16
+
+// lcd
+#define DISPLAY_RST_PIN NO_PIN
+#define DISPLAY_DC_PIN B12
+#define DISPLAY_CS_PIN B9
+#define DISPLAY_SPI_DIVIDER 1
+
+#define DRV2605L_FB_ERM_LRA   0
+#define DRV2605L_GREETING     DRV2605L_EFFECT_750_MS_ALERT_100
+#define DRV2605L_DEFAULT_MODE DRV2605L_EFFECT_BUZZ_1_100

keyboards/handwired/tractyl_manuform/5x6_right/f405/f405.c

@@ -0,0 +1,49 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "tractyl_manuform.h"
+
+#ifdef USB_VBUS_PIN
+bool usb_vbus_state(void) {
+    gpio_set_pin_input_low(USB_VBUS_PIN);
+    wait_us(5);
+    return gpio_read_pin(USB_VBUS_PIN);
+}
+#endif
+
+void user_button_init(void) {
+    // Pin needs to be configured as input low
+#ifdef USER_BUTTON_PIN
+    gpio_set_pin_input_low(USER_BUTTON_PIN);
+#endif // USER_BUTTON_PIN
+}
+
+bool check_user_button_state(void) {
+    gpio_write_pin(DEBUG_LED_PIN, is_keyboard_master());
+#ifdef USER_BUTTON_PIN
+    return gpio_read_pin(USER_BUTTON_PIN);
+#endif // USER_BUTTON_PIN
+    return false;
+}
+
+void board_init(void) {
+    // Board setup sets these pins as SPI, but we aren't using them as such.
+    // So to prevent them from misbehaving, we need to set them to a different, non-spi mode.
+    // This is a bit of a hack, but nothing else runs soon enough, without re-implementing spi_init().
+    gpio_set_pin_input(A5);
+    gpio_set_pin_input(A6);
+    gpio_set_pin_input(A7);
+}

keyboards/handwired/tractyl_manuform/5x6_right/f405/halconf.h

@@ -0,0 +1,35 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define HAL_USE_SERIAL  TRUE
+#define SERIAL_BUFFERS_SIZE 256
+
+#if defined(WS2812_PWM) || defined(BACKLIGHT_PWM)
+#    define HAL_USE_PWM TRUE
+#endif // defined(WS2812_PWM) || defined(BACKLIGHT_PWM)
+
+#if HAL_USE_SPI == TRUE
+#    define SPI_USE_WAIT TRUE
+#    define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
+#endif
+
+#ifdef AUDIO_DRIVER_DAC
+#    define HAL_USE_GPT TRUE
+#    define HAL_USE_DAC TRUE
+#endif
+
+#include_next <halconf.h>

keyboards/handwired/tractyl_manuform/5x6_right/f405/keyboard.json

@@ -0,0 +1,66 @@
+{
+    "keyboard_name": "Tractyl Manuform (5x6) WeAct STM32F405",
+    "audio": {
+        "driver": "dac_additive",
+        "power_control": {
+            "pin": "A3"
+        }
+    },
+    "backlight": {
+        "levels": 16,
+        "pin": "C7"
+    },
+    "bootloader": "stm32-dfu",
+    "build": {
+        "debounce_type": "asym_eager_defer_pk"
+    },
+    "diode_direction": "COL2ROW",
+    "encoder": {
+        "rotary": [
+            {"pin_a": "A15", "pin_b": "C0"}
+        ]
+    },
+    "eeprom": {
+        "driver": "wear_leveling",
+        "wear_leveling": {
+            "driver": "spi_flash",
+            "backing_size": 16384,
+            "logical_size": 4096
+        }
+    },
+    "features": {
+        "console": true,
+        "haptic": true
+    },
+    "haptic": {
+        "driver": "drv2605l"
+    },
+    "matrix_pins": {
+        "cols": ["C1", "C2", "C3", "A0", "A1", "A2"],
+        "rows": ["A6", "A7", "C4", "C5", "B0", "B1"]
+    },
+    "processor": "STM32F405",
+    "rgblight": {
+        "led_count": 24,
+        "split": true
+    },
+    "split": {
+        "handedness": {
+            "pin": "B11"
+        },
+        "serial": {
+            "driver": "usart"
+        },
+        "transport": {
+            "sync": {
+                "activity": true,
+                "haptic": true,
+                "matrix_state": true
+            }
+        }
+    },
+    "ws2812": {
+        "driver": "pwm",
+        "pin": "C6"
+    }
+}

keyboards/handwired/tractyl_manuform/5x6_right/f405/mcuconf.h

@@ -0,0 +1,74 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_LSE_ENABLED
+#define STM32_LSE_ENABLED TRUE
+
+#undef STM32_PLLM_VALUE
+#define STM32_PLLM_VALUE 8
+
+#undef STM32_RTCSEL
+#define STM32_RTCSEL STM32_RTCSEL_LSE
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 TRUE
+
+#if HAL_USE_WDG == TRUE
+#    undef STM32_WDG_USE_IWDG
+#    define STM32_WDG_USE_IWDG TRUE
+#endif
+
+#if HAL_USE_I2C == TRUE
+#    undef STM32_I2C_USE_I2C1
+#    define STM32_I2C_USE_I2C1 TRUE
+
+#    undef STM32_I2C_BUSY_TIMEOUT
+#    define STM32_I2C_BUSY_TIMEOUT 10
+
+#    undef STM32_I2C_I2C1_RX_DMA_STREAM
+#    define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
+#    undef STM32_I2C_I2C1_TX_DMA_STREAM
+#    define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
+#endif // HAL_USE_I2C
+
+#ifdef WS2812_PWM
+#    undef STM32_PWM_USE_TIM3
+#    define STM32_PWM_USE_TIM3 TRUE
+#endif // WS2812_PWM
+
+#ifdef BACKLIGHT_PWM
+#    undef STM32_PWM_USE_TIM8
+#    define STM32_PWM_USE_TIM8 TRUE
+#endif
+
+#if HAL_USE_SPI == TRUE
+#    undef STM32_SPI_USE_SPI1
+#    define STM32_SPI_USE_SPI1 TRUE
+#endif
+
+#ifdef AUDIO_DRIVER_DAC
+#    undef STM32_DAC_USE_DAC1_CH1
+#    define STM32_DAC_USE_DAC1_CH1 TRUE
+#    undef STM32_DAC_USE_DAC1_CH2
+#    define STM32_DAC_USE_DAC1_CH2 TRUE
+
+#    undef STM32_GPT_USE_TIM6
+#    define STM32_GPT_USE_TIM6 TRUE
+#endif // AUDIO_DRIVER_DAC

keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h

@@ -19,6 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #pragma once
 
 // #define USB_VBUS_PIN        B10 // doesn't seem to work for me on one of my controllers... */
+#define USER_BUTTON_PIN     A0
 
 // WS2812 RGB LED strip input and number of LEDs
 #define WS2812_PWM_DRIVER   PWMD2  // default: PWMD2
@@ -70,7 +71,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* eeprom config */
 #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
-#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    64
+#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR    8
 
 /* pmw3360 config  */
 #define PMW33XX_CS_PIN                       B0
+#define PMW33XX_SPI_DIVISOR                  8