Forked for the purpose of adding support for setting the internal sample rate in "normal mode" as requested in issue #10- (BlueDot-Arduino#10). No other changes made. Just replaced writeIIRFilter() that sets IIR Filter only with writeConfig() which sets all three available parameters in memory address 0xF5.

BlueDot Arduino Libraries

This library allows the user to program and read the outputs of the BME280 Sensor with an Arduino Board.

Repository Contents

• Source Files (.cpp and .h)
• Example Sketch: BME280_WeatherStation.ino
• Example Sketch: BME280_MultipleSensorsI2C.ino
• Example Sketch: BME280_MultipleSensorsSPI.ino
• library.properties File

Version History

• V1.0.0 - Public Release Version
• V1.0.1 - New sketch for reading two sensors through I2C communication
• V1.0.2 - New sketch for reading multiple sensors through SPI communication
• V1.0.3 - Minor correction on BME280_WeatherStation.ino sketch
• V1.0.4 - Minor corrections on all sketches
• V1.0.5 - Minor correction on BME280_WeatherStation.ino sketch
• V1.0.6 - Minor correction on BME280_WeatherStation.ino sketch
• V1.0.7 - Minor correction on BME280_WeatherStation.ino sketch
• V1.0.8 - Library adapted for NodeMCU Boards with ESP8266
• V1.0.9 - Corrected Version of Library V1.0.8 (mistake on .cpp file with Wire.begin() function)

License Information

This licence is released under the Creative Commons ShareAlike 4.0 International license.

This Library is distributed as-is and no warranty is given.