foreman_proxy::plugin::salt on debian-11-x86_64 with default settings should configure master.d/foreman.conf Failure/Error: should contain_file('/etc/salt/master.d/foreman.conf'). with_content(%r{autosign_grains_dir: /var/lib/foreman-proxy/salt/grains}). with_content(%r{autosign_file: /etc/salt/autosign.conf}). with_content(%r{user: root}). with_content(%r{netapi_enable_clients:\n - runner}). with_content(%r{external_auth:\n - pam\n - saltuser\n - '@runner'}) expected that the catalogue would contain File[/etc/salt/master.d/foreman.conf] with content set to /external_auth:\n - pam\n - saltuser\n - '@runner'/ but it is set to "# /etc/salt/master.d/foreman.config Master configuration\n#\n# This file summarizes configurations for the salt-master.\n# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations.\n#\n# After editing this file, run the following command to active the changes:\n# systemctl restart salt-master\n\n\n##\n# Autosign\nautosign_grains_dir: /var/lib/foreman-proxy/salt/grains\nautosign_file: /etc/salt/autosign.conf\n# Uncomment the next line to make use of the autosign host name file (not recommended)\n# permissive_pki_access: True\n\n\n##\n# Salt Master service user\nuser: root\n\n\n##\n# Node classifier\nmaster_tops:\n ext_nodes: /usr/bin/foreman-node\n\n\n##\n# Pillar data access\next_pillar:\n - puppet: /usr/bin/foreman-node\n\n\n##\n# Salt API access\nexternal_auth:\n pam:\n saltuser:\n - '@runner'\n\nrest_cherrypy:\n port: 9191\n ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem\n ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem\n\nnetapi_enable_clients:\n - runner\n\n\n##\n# Remote execution provider\npublisher_acl:\n foreman-proxy:\n - state.template_str\n\n\n##\n# Reactors\nreactor:\n - 'salt/auth': # Autosign reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls\n - 'salt/job/*/ret/*': # Report reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls\n" Diff: @@ -1,64 +1,127 @@ -(?-mix:external_auth:\n - pam\n - saltuser\n - '@runner') +# /etc/salt/master.d/foreman.config Master configuration +# +# This file summarizes configurations for the salt-master. +# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations. +# +# After editing this file, run the following command to active the changes: +# systemctl restart salt-master + + +## +# Autosign +autosign_grains_dir: /var/lib/foreman-proxy/salt/grains +autosign_file: /etc/salt/autosign.conf +# Uncomment the next line to make use of the autosign host name file (not recommended) +# permissive_pki_access: True + + +## +# Salt Master service user +user: root + + +## +# Node classifier +master_tops: + ext_nodes: /usr/bin/foreman-node + + +## +# Pillar data access +ext_pillar: + - puppet: /usr/bin/foreman-node + + +## +# Salt API access +external_auth: + pam: + saltuser: + - '@runner' + +rest_cherrypy: + port: 9191 + ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem + ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem + +netapi_enable_clients: + - runner + + +## +# Remote execution provider +publisher_acl: + foreman-proxy: + - state.template_str + + +## +# Reactors +reactor: + - 'salt/auth': # Autosign reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls + - 'salt/job/*/ret/*': # Report reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls

foreman_proxy::plugin::salt on debian-11-x86_64 with overwritten parameters should change master.d/foreman.conf parameters Failure/Error: should contain_file('/etc/salt/master.d/foreman.conf'). with_content(%r{user: example}). with_content(%r{autosign_grains_dir: /var/lib/foreman-proxy/salt/grains}). with_content(%r{autosign_file: /etc/salt/example.conf}). with_content(%r{netapi_enable_clients:\n - runner\n - local\n - ssh\n - wheel}). with_content(%r{external_auth:\n - ldap\n - saltuser\n - '@runner'}) expected that the catalogue would contain File[/etc/salt/master.d/foreman.conf] with content set to /external_auth:\n - ldap\n - saltuser\n - '@runner'/ but it is set to "# /etc/salt/master.d/foreman.config Master configuration\n#\n# This file summarizes configurations for the salt-master.\n# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations.\n#\n# After editing this file, run the following command to active the changes:\n# systemctl restart salt-master\n\n\n##\n# Autosign\nautosign_grains_dir: /var/lib/foreman-proxy/salt/grains\nautosign_file: /etc/salt/example.conf\n# Uncomment the next line to make use of the autosign host name file (not recommended)\n# permissive_pki_access: True\n\n\n##\n# Salt Master service user\nuser: example\n\n\n##\n# Node classifier\nmaster_tops:\n ext_nodes: /usr/bin/foreman-node\n\n\n##\n# Pillar data access\next_pillar:\n - puppet: /usr/bin/foreman-node\n\n\n##\n# Salt API access\nexternal_auth:\n ldap:\n saltapi:\n - '@runner'\n\nrest_cherrypy:\n port: 9191\n ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem\n ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem\n\nnetapi_enable_clients:\n - runner\n - local\n - ssh\n - wheel\n\n\n##\n# Remote execution provider\npublisher_acl:\n foreman-proxy:\n - state.template_str\n\n\n##\n# Reactors\nreactor:\n - 'salt/auth': # Autosign reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls\n - 'salt/job/*/ret/*': # Report reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls\n" Diff: @@ -1,67 +1,133 @@ -(?-mix:external_auth:\n - ldap\n - saltuser\n - '@runner') +# /etc/salt/master.d/foreman.config Master configuration +# +# This file summarizes configurations for the salt-master. +# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations. +# +# After editing this file, run the following command to active the changes: +# systemctl restart salt-master + + +## +# Autosign +autosign_grains_dir: /var/lib/foreman-proxy/salt/grains +autosign_file: /etc/salt/example.conf +# Uncomment the next line to make use of the autosign host name file (not recommended) +# permissive_pki_access: True + + +## +# Salt Master service user +user: example + + +## +# Node classifier +master_tops: + ext_nodes: /usr/bin/foreman-node + + +## +# Pillar data access +ext_pillar: + - puppet: /usr/bin/foreman-node + + +## +# Salt API access +external_auth: + ldap: + saltapi: + - '@runner' + +rest_cherrypy: + port: 9191 + ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem + ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem + +netapi_enable_clients: + - runner + - local + - ssh + - wheel + + +## +# Remote execution provider +publisher_acl: + foreman-proxy: + - state.template_str + + +## +# Reactors +reactor: + - 'salt/auth': # Autosign reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls + - 'salt/job/*/ret/*': # Report reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls

foreman_proxy::plugin::salt on redhat-8-x86_64 with default settings should configure master.d/foreman.conf Failure/Error: should contain_file('/etc/salt/master.d/foreman.conf'). with_content(%r{autosign_grains_dir: /var/lib/foreman-proxy/salt/grains}). with_content(%r{autosign_file: /etc/salt/autosign.conf}). with_content(%r{user: root}). with_content(%r{netapi_enable_clients:\n - runner}). with_content(%r{external_auth:\n - pam\n - saltuser\n - '@runner'}) expected that the catalogue would contain File[/etc/salt/master.d/foreman.conf] with content set to /external_auth:\n - pam\n - saltuser\n - '@runner'/ but it is set to "# /etc/salt/master.d/foreman.config Master configuration\n#\n# This file summarizes configurations for the salt-master.\n# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations.\n#\n# After editing this file, run the following command to active the changes:\n# systemctl restart salt-master\n\n\n##\n# Autosign\nautosign_grains_dir: /var/lib/foreman-proxy/salt/grains\nautosign_file: /etc/salt/autosign.conf\n# Uncomment the next line to make use of the autosign host name file (not recommended)\n# permissive_pki_access: True\n\n\n##\n# Salt Master service user\nuser: root\n\n\n##\n# Node classifier\nmaster_tops:\n ext_nodes: /usr/bin/foreman-node\n\n\n##\n# Pillar data access\next_pillar:\n - puppet: /usr/bin/foreman-node\n\n\n##\n# Salt API access\nexternal_auth:\n pam:\n saltuser:\n - '@runner'\n\nrest_cherrypy:\n port: 9191\n ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem\n ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem\n\nnetapi_enable_clients:\n - runner\n\n\n##\n# Remote execution provider\npublisher_acl:\n foreman-proxy:\n - state.template_str\n\n\n##\n# Reactors\nreactor:\n - 'salt/auth': # Autosign reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls\n - 'salt/job/*/ret/*': # Report reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls\n" Diff: @@ -1,64 +1,127 @@ -(?-mix:external_auth:\n - pam\n - saltuser\n - '@runner') +# /etc/salt/master.d/foreman.config Master configuration +# +# This file summarizes configurations for the salt-master. +# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations. +# +# After editing this file, run the following command to active the changes: +# systemctl restart salt-master + + +## +# Autosign +autosign_grains_dir: /var/lib/foreman-proxy/salt/grains +autosign_file: /etc/salt/autosign.conf +# Uncomment the next line to make use of the autosign host name file (not recommended) +# permissive_pki_access: True + + +## +# Salt Master service user +user: root + + +## +# Node classifier +master_tops: + ext_nodes: /usr/bin/foreman-node + + +## +# Pillar data access +ext_pillar: + - puppet: /usr/bin/foreman-node + + +## +# Salt API access +external_auth: + pam: + saltuser: + - '@runner' + +rest_cherrypy: + port: 9191 + ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem + ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem + +netapi_enable_clients: + - runner + + +## +# Remote execution provider +publisher_acl: + foreman-proxy: + - state.template_str + + +## +# Reactors +reactor: + - 'salt/auth': # Autosign reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls + - 'salt/job/*/ret/*': # Report reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls

foreman_proxy::plugin::salt on redhat-8-x86_64 with overwritten parameters should change master.d/foreman.conf parameters Failure/Error: should contain_file('/etc/salt/master.d/foreman.conf'). with_content(%r{user: example}). with_content(%r{autosign_grains_dir: /var/lib/foreman-proxy/salt/grains}). with_content(%r{autosign_file: /etc/salt/example.conf}). with_content(%r{netapi_enable_clients:\n - runner\n - local\n - ssh\n - wheel}). with_content(%r{external_auth:\n - ldap\n - saltuser\n - '@runner'}) expected that the catalogue would contain File[/etc/salt/master.d/foreman.conf] with content set to /external_auth:\n - ldap\n - saltuser\n - '@runner'/ but it is set to "# /etc/salt/master.d/foreman.config Master configuration\n#\n# This file summarizes configurations for the salt-master.\n# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations.\n#\n# After editing this file, run the following command to active the changes:\n# systemctl restart salt-master\n\n\n##\n# Autosign\nautosign_grains_dir: /var/lib/foreman-proxy/salt/grains\nautosign_file: /etc/salt/example.conf\n# Uncomment the next line to make use of the autosign host name file (not recommended)\n# permissive_pki_access: True\n\n\n##\n# Salt Master service user\nuser: example\n\n\n##\n# Node classifier\nmaster_tops:\n ext_nodes: /usr/bin/foreman-node\n\n\n##\n# Pillar data access\next_pillar:\n - puppet: /usr/bin/foreman-node\n\n\n##\n# Salt API access\nexternal_auth:\n ldap:\n saltapi:\n - '@runner'\n\nrest_cherrypy:\n port: 9191\n ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem\n ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem\n\nnetapi_enable_clients:\n - runner\n - local\n - ssh\n - wheel\n\n\n##\n# Remote execution provider\npublisher_acl:\n foreman-proxy:\n - state.template_str\n\n\n##\n# Reactors\nreactor:\n - 'salt/auth': # Autosign reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls\n - 'salt/job/*/ret/*': # Report reactor\n - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls\n" Diff: @@ -1,67 +1,133 @@ -(?-mix:external_auth:\n - ldap\n - saltuser\n - '@runner') +# /etc/salt/master.d/foreman.config Master configuration +# +# This file summarizes configurations for the salt-master. +# Have a look at the [Foreman Salt Plugin Documentation](https://theforeman.org/plugins/foreman_salt/) for detailed explanations. +# +# After editing this file, run the following command to active the changes: +# systemctl restart salt-master + + +## +# Autosign +autosign_grains_dir: /var/lib/foreman-proxy/salt/grains +autosign_file: /etc/salt/example.conf +# Uncomment the next line to make use of the autosign host name file (not recommended) +# permissive_pki_access: True + + +## +# Salt Master service user +user: example + + +## +# Node classifier +master_tops: + ext_nodes: /usr/bin/foreman-node + + +## +# Pillar data access +ext_pillar: + - puppet: /usr/bin/foreman-node + + +## +# Salt API access +external_auth: + ldap: + saltapi: + - '@runner' + +rest_cherrypy: + port: 9191 + ssl_key: /etc/puppetlabs/puppet/ssl/private_keys/foo.example.com.pem + ssl_crt: /etc/puppetlabs/puppet/ssl/certs/foo.example.com.pem + +netapi_enable_clients: + - runner + - local + - ssh + - wheel + + +## +# Remote execution provider +publisher_acl: + foreman-proxy: + - state.template_str + + +## +# Reactors +reactor: + - 'salt/auth': # Autosign reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_minion_auth.sls + - 'salt/job/*/ret/*': # Report reactor + - /usr/share/foreman-proxy/salt/reactors/foreman_report_upload.sls